Tender For Submersible Pump And Handpump Repairing With Labours And Material Etc. For Annual Year 2025-26, amalner-Maharashtra

Submersible Pump And Handpump Repairing With Labours And Material Etc. For Annual Year 2025-26- 1 Submersible pump and Handpup repairing with labours etc. 2 Dismentling existing handpump and ressembling after workdone 3 Repalcement of Handpump Chain 4 Supplying and erecting ISI mark G.I.Pipe 32 mm dia.B Class at position with accessories.As per specification No.CW 5 Providing and fitting new metal rod in handpump 6 Providing and fitting new cylinder in hadpump 7 Nominal Repairing of handpump 8 Providing and fitting new nut bolt in handpump 9 Providing and fitting new bearing in handpump 10 Providing and fitting new pin in handpump 11 Providing and fitting 1000 liter new water tank 12 Replacement of 3/4 GI pipe in handpump 13 Dismaintiling the existing submersible pump with PVCpipeline 14 Dismantling the existing submersible pump with Gi 15 Rewinding of submersible pump motor in borewell of all types and makes upto and including 5 hp upto 25 h p with coated copper wires & overhauling with coated copper wires & overhauling with minor repairs, lubricating of ball earings& bush bearing, and replacing screws etc. testing for the original speed, hp and no load consumption & guarantee. 16 Rewinding of submersible pump motor in borewell of all types and makes upto and including 5 hp with coated copper wires & overhauling with coated 5.00 copper wires & overhauling with minor repairs, lubricating of ball earings & bush bearing, and replacing screws etc. testing for the original speed, hp and no load consumption & guarantee. 17 Replacing the existing bearing of approved make for electric motor ac single 16.00 phase3 phase upto hp of all types with due alignment of the shaft and tested 18 Replacing the existing bearing of approved make for electric motor a.c 3 phase 3 phase upto 2 hp to 3 hp of all types with due alignment of the shaft and tested 19 replacing the existing bearing of approved make for electric motor 5 hp & 7.5 hp of all types with due alignment of the shaft and tested 20 replacing the existing bearing of approved make for electric motor 10 hp and 12.5 hp of all types with due alignment of the shaft and tested 21 replacing the existing bearing of approved make for electric motor 15 hp & 20 hp of all types with due alignment of the shaft and tested 22 replacing the existing ampere of approved make for electric motor of all types with due alignment of the shaft and tested 23 replacing the existing bushing of approved make for electric motor of all types with due alignment of the shaft and tested 24 replacing the existing sleeve of approved make for electric motor of all typeswith due alignment of the shaft and tested 25 Lethwork 26 replacing the existing PVC pipe of motor 27 replacing the existing GI pipe of motor 28 supplying and erecting flat flexible 3 core 1.5 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intrvals with column pipe assembly 29 supplying and erecting flat flexible 3 core 2.5 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intrvals with column pipe assembly 30 supplying and erecting flat flexible 3 core 4 sq mm PVC sheathedsubmersible type copper cable suitably clamped at fixed intrvals with column pipe assembly 31 supplying and erecting flat flexible 3 core 6 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intrvals with column pipe assembly 32 supplying and erecting flat flexible 3 core 10 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intrvals with column pipe assembly. 33 supplying and erecting pump protection realay comprising current sensing phase failure and uv+ov relay with dry run and overload protection suitablefor 3 phase pumps (silmailar to 34 supplying and erecting no-volt-coll similar to L&T make for motor having DOL starters of MU-1 Type upto5 H.P 35 Supplying and erecting no-volt-coil similar to L&T makefor motor having DOL starters of MU-1 Type From 7.5 H.p 36 Replacing relay of starter 37 nominal reparing of borewell like door, clamp top and bottom pleces ets 38 supplying and erecting D.O.L Starter suitable for 250V Single phase, 50 cycle with overload element with necessary materials and connected to supply upto 7.5 hp 39 supplying and erecting D.O.L Starter suitable for 400v 3 phase, 50 cycle withno volt coil and overload element with necessary materials and connected to supply upto 7.5 hp 40 supplying and erecting D.O.L Starter 400v 3 phase, 50 cycle with no volt coil and overload element with necessary materials and connected to supply for 10 hp 41 replacing 63 amp Cutout 42 rewinding of monblock motor of all types and makes above 0.5 hp upto 10 hp with coated copper wires & overhauling with minor repairs, lubricating of ball bearings & Bush bearing and replacing screws etc testing speed. h.p and no 43 servicing of monoblock pump 44 handpumup set india mark II (including 12 nos of pipe calls and 12 nos of connecting rod cylinder and stand assemblyb etc as per rate appoved by zp 45 india mark ii handpump fitting & installation charges ets complete as directed by 46 supplying and ereting submersible pumpset of2hp with 415 v, 50 c/s supply suitable for 150 mm din Borewell 47 supplying and ereting submersible pumpset of3 hp with 415 v. 50 c/s ac supply suitable for 150 mm din Borewell 48 supplying and ereting submersible pumpset of5hp with 415 v. 50 c/s ac supply suitable for 150 mm din Borewell 49 supplying and ereting submersible pumpset of 7.5 hp with 415 v, 50 c/s ac supply suitable for 150 mm din Borewell 50 supplying and ereting submersible pumpset of 10 hp with 415 v. 50 c/s ac supply suitable for 150 mm din Borewell 51 supplying and ereting submersible pumpset of 15hp with 415 v, 50 cls ac supply suitable for 150 mm din Borewell 52 supplying and ereting submersible pumpset of 30 hp with 415 v, 50 c/s ac supply suitable for 150 mm din Borewell 53 supplying & ereting centrifugal water pump (monoblock), 230v. single phase 52.00 50 cycles a.c supply of 0.5Hp of specifled discharge head & size of suction, delivery pipes on provided c c foundation as per 54 supplying& ereting centrifugal water pump (monoblock), 230v, single phase 50 cycles a.c supply of 1Hp ofspecifled discharge head & size of suction, delivery pipes on provided c.c foundation as per 55 supplying & ereting centrifugal water pump (monoblock), 230v, single phase 54.00 50 cycles a.c supply of 1.5Hp of specifled discharge head & size of suction, delivery pipes on provided c.c foundation as per 56 supplying & ereting centrifugal water pump (monoblock), 415v, three phase 50 cycles a.c. supply of 2Hp of specified discharge 2.2/4.1 Liters per second(LPS) for head of size 8/26m and provided c.c foundation as per 50mm suction/40mm, delivery pipes on provided c.c foundation as per 57 supplying & ereting centrifugal water pump (monoblock), 415v, three phase 50 cycles a.c supply of 3Hp of specifled discharge 2/4.1 Liters per second (LPS) for head of size 14/36m and 50mm suction/40mm, delivery pipes on provided c.c foundation as per 58 supplying & ereting centrifugal water pump (monoblock), 415v, three phase 50 cycles a.c. supply of 5Hp of specifled discharge 2/4.1 Liters per second (LPS) for head of size 36/52m and 50mm suction/40mm, delivery pipes on provided c.c foundstion as per 59 supplying & ereting centrifugal water pump (monoblock). 415v, three phase 50 cycles a.c. supply of 7 5Hp of specified discharge 4.5/8.6 Liters per second (LPS) for head of size 36/52m and 65mm suction/50mm, delivery pipes of size with discharge 11 1/19.9 liters per second (LPS) for head of 16/30m and 80mm suction/65mm delivery pipe size on provided c.c foundstion as per 60 supplying & ereting centrifugal water pump (monoblock), 415v. three phase 50 cycles a.c. supply of 10Hp of specifled discharge 9.6/21.6 Liters per second (LPS) for head of size 18/40m and 80mm suction/65mm. delivery 59.00 pipes of size or with discharge 4.3/7.8 liters per second (LPS) for head of 40/64m and 65mm suction/50mm delivery pipe size on provided c.c foundstion as per

INR 3000 /-

INR 50000.0 /-

Refer document