Tender For Open Gym Supply And Fixing Work, Bundi-Rajasthan

Open gym Supply And Fixing Work As Per Tender Documents , Multi Play System Providing And Fixing All Vertical Pipes (Legs) Of Playing In A Ground By Doing Excavation And C.C. M-20 Of Size 0.30X0.30X0.30 Meter Description:- Main Frame Is Of 80Mm Nb “B” Class Gi Pipe. Platform Is Of Frp With Thickness Of 4 To 5Mm. High Tensile Steel With Galvanized Nut & Bolts Are Used.The Powder Coating Done With Pure Polyster Powder Of Ackzonoble Or Berger With 60 To 70 Micron Thickness. Square Deck With Cannopy : 3 Nos. Spiral Slide : 2.1 M – 1 No. Frp Wave Slide : 2.1 M – 1 No. Double Swing :1 No Circular Swing : 2 Nos. Close Tunnel :1 No Frp Bridge : 1 Nos. Step Ladder : 1 Nos. Area : 7.5 M X 6.0 M Safe Play Area : 9.0 M X 57.0 M Product Height : 4.0 M Appro , Roller Slide 2.1 Mt. Providing, Supply And Fixing Of Roller Slide Having An Overall Area Of 4.5 Mt. X 0.5 Mt. And Platform Height Of 2.1 Mt.Platform Should Be Made Of 18 Swg. G.I. Sheet With Supporting Leg Of 80 Mm. Nb Pipe. Sliding Chute To Be Made From 25 Mm Nb Pipe To Be Fitted In Fabricated Frame With The Help From Nylon Bush Having A Sliding Length Of 3.5 Mt. And 450 Mm Wide. Ladder To Be Made Of 25 Mm. Nb Pipe And Steps To Be Fabricated From 16Swg. Aluminum Chequred Sheet With Width Of 75Mm. Tread 90Mm ,Riser 250Mm. And Railing From 20 Mm Nb Pipe. All Pipes Used Should Be “A” Class G.I. Pipe Confirming To Is: 1239. And All Angles And Flats Should Be Galvanized. All Welded Joints Should Be Properly Surfaced Should Be Sealed With Epoxy Sealant. There Should Be No Longitudinal Joints. Equipment Has To Be Painted With Synthetic Enamel Paint After Applying One Coat Primer. Equipment Has To Be Installed With The Ratio Of 1:2:4 Cement, Sand And Concrete As Per The Direction Of Engineer In Charge. , Elephant Slide : Age Group- 6 To 12 Years. Safety Play Area - 4*10 Ft, H=4 Ft, Frp Thickness=3 - 4 Mm, Paint= To Coat Colourfull With Aspa Paint , Providing Fixing And Installation At Site Of M- Climber: - Safe Play Area- 2.4 Mtr X 1.0 Mtr. Providing And Fixing Of ‘M’ Climbers With Main Frame Of 40 Mm Idgi Pipe With Rungs Of 25 Mm Idgi Pipe. The Ground Height Is 1.8 Mtr. And Width Is 0.6 Mtr. This Climb Has A Capacity Of 6 To 8 Children’S And Painted By Oven Backed Powder Coating Of All Components. All Welded Joint Are Grinded With Grinder And Filled With Filler For Smooth And Elegant Looking Wherever Feasible Contractor Oven Backed Powder Coating. . All The Sharp Edges And Corner Properly Grinded To Give Smooth Finishing So That Children Are Not Hurt With Playing On It. The Pure Polyester Powder Coating (Oven Baked) Done On The Pipes Extend The Life Of Equipments. The Pure Polyester Powder Coating (Oven Baked) Done On The Pipes Extend The Life Of Equipments. And Install By C.C. Base System As Per Order By Engineer In Charge Age Capacity 6- 12 Year. , Skip Den Four Way Climbers Age Group:- 4 – 12 Yrs. Product Area:- 4.5 X 4.5 M Safe Play Area:- 5.5 M X 5.5 M The Skip Den Is Made Out Of 40 Mm Gi Nb Pipe And Inner Frame Is Made Out Of 32 Mm Nb Gi Pipe And Having 4 Way To Climb In Different Style In Centre One Ladder Is To Beput To Climb And Complete As Per Direction Of Incharge And Dukly Coloured Etc. , Four Seater M.G.R. (Merry Go Round) Providing And Fixing All Vertical Pipes (Legs) Of Playing In A Ground By Doing Excavation And C.C. M-20 Of Size 0.30X0.30X0.30 Meter *Age Group: - 3 - 10 Years. *Area: - F 1.5 M *Safe Play Area: - F 2.5 M *Platform Height: - 0.8 M *Four Seater M.G.R. (Merry Go Round) Play Equipment Made From “B” Class G.I. Pipe Of Different Nb.Nb Stands For Nominal Bore Sizes I.E. Internal Diameter Of Pipe In Millimetres. :: *The Main Frame Is Made Up Of F40mm Nb “B” Class G.I. Pipe Which Is Welded To M.S. Round Plate Of F250 X10 Mm Thickness. This Main Frame Supported By F32mm Nb “B” Class G.I. Pipe. *The M.G.R. Stand Is Made From F80mm Nb “B” Class G.I. Pipe. :: *For M.G.R. “6209” And “30209” Bearings Are Used Which Are Of Reputed Make. :: *The Seats Attached Shall Be Made Out Of Best Quality F.R.P. Material In Attractive Shape With Attractive Colours. These Seats Are Safely Mounted On Bend Pipe Of F20mm Nb “B” Class G.I. Bend Pipe And M.S. Flat Of 40X5mm. *High Tensile Steel Galvanized Nuts, Bolts & Washer Are Used For Assembly. :: *The Powder Coating Is Done By Pure Polyester Powder Of Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness. , Providing Fixing And Installation At Site Of See-Saw Double Board: - Safe Play Area -2.5 Mtr. X 3.5 Mtr. Height- 0.4 Mtr. Its Required Area 1.5Mtr X 3.5Mtr. Outer Frame Should Be Made By 40Mm Idgi Pipe Connected With 50Mm Idgi Centre Pipe Handle Should Be Made By 20Mm Idgi Pipe. Total Height 0.4Mtr. From Ground Level. 4 Nos. Of Sheet Made By 5Mm Thick Frp. The Pure Polyester Powder Coating (Oven Baked) Done On The Pipes Extend The Life Of Equipments. All The Sharp Edges And Corner Properly Grinded To Give Smooth Finishing So That Children Are Not Hurt With Playing On It. The Pure Polyester Powder Coating (Oven Baked) Done On The Pipes Extend The Life Of Equipments.Frp Components Should Be Paint By 3 Layers Of Pu Paint. And Install By C.C. Base System As Per Order By Engineer In Charge. , Arc Double Seater Swing With Belt Seat 2” Post Providing, Supply And Fixing Of Arc Double Seater Swing With Belt Seat Having Over All Area 3.0 Mt. X 1.5 Mt. And Height Of 2.4 M Top Bar Should Be 50Mm Nb Pipe And Leg Pipe Should Be 50Mm Nb Pipe. Belt Seat Should Be Made From 9 Mm Thk. Reinforced Rubber With Nonskid Top, To Be Suspended With The Help Of 8 Mm Thk. Galvanized Chain In Housing Having Heavy Duty Ball Bearing.. All Pipes Used Should Be “A” Class G.I. Pipe Confirming To Is: 1239 . All Welded Joints Should Be Properly Surfaced Should Be Sealed With Epoxy Sealant. There Should Be No Longitudinal Joints. Equipment Has To Be Multicolour Powder Coated / Spray Painted. Equipment Has To Be Installed With The Ratio Of 1:2:4 Cement, Sand And Concrete As Per The Direction Of Engineer In Charge.

INR 500 /-

INR 40000.0 /-

INR 20 Lakhs /-