|
| 1 | Safe loading carriage including unloading & proper stacking of following store materials from any Electy.Store of Raebareli Zone (Unnao) to work site/JE Dump Store. |
| 2 | PCC pole 8.5 mtr Long |
| 3 | S.T POLE 11MTR. LONG |
| 4 | 11K.V XLPE CB. 3X185MM |
| 5 | 11KV XLPE CB. BOX O/D 3X185MM |
| 6 | TOP CHANNEL |
| 7 | Earthing Complete |
| 8 | Stay Camplete |
| 9 | G.I WIRE 10 SWG |
| 10 | BASE ANGLE |
| 11 | DROPPER CHANNEL 100X50MM |
| 12 | 11KV DISC FITTING (B&S) 70KN |
| 13 | 11KV COMP. POLY. PIN INSULATOR |
| 14 | 11KV COMP. POLY. GI PIN |
| 15 | DANGER BOARD WITH CLAMP |
| 16 | G.I BARBED WIRE |
| 17 | ACSR WEASAL COND. |
| 18 | ACSR DOG COND. |
| 19 | 11KV V-TYPE X-ARM |
| 20 | X-ARM HOLDING CLAMP FOR STP |
| 21 | Holding ClampTOP & DROPPER with Nuts & Bolts) |
| 22 | 11KV F-CLAMP FOR STP |
| 23 | 33K.V XLPE CB. 3X300MM |
| 24 | 33KV XLPE CB. BOX O/D 3X300MM |
| 25 | 11KV DISC INSULATOR 40KN |
| 26 | 33 KV PIN INSHULATOR |
| 27 | 33 KV GI PIN WITH NUT |
| 28 | 33 KV V-TYPE X-ARM |
| 29 | 33 KV F-CLAMP |
| 30 | Erection of the following support through digging pits complete in all respect including cutting, making holes, fixing of all types of accessories as per RESSPO/REC drawing. (All type of clamps nut & bolt, washer to be provided by contractor.) |
| 31 | Providing & Fixing ofStone Pad (300x300x75 mm) |
| 32 | 33 KV Single support of ST Pole 11mtr long.with X Arm, Pin insulator with all accessories as required. |
| 33 | 33 KV Double pole structure on S.T. Pole 11mtr long complete with Top Channel, bracing & all other acessories as required |
| 34 | 33 KV Cable Exposer Double pole structure on S.T. Pole 11mtr long complete with Top Channel,bracing. & all other acessories as required |
| 35 | Four Pole structure on ST Pole 11mtr long complete with Top Channel,bracing.& all other acessories as required |
| 36 | 11 KV Single support of ST Pole 11mtr long./ PCC PLE 8.5 MTR LONG with X Arm, Pin insulator with all accessories as required. |
| 37 | 11 KV Double pole structure on S.T. Pole 11mtr long complete with Top Channel, bracing & all other acessories as required |
| 38 | Concreting of supports with cement, concrete (CC will be of cement coarse sand & Stone Grit) Grouting will be done with the help of wooden/steel formers in a block of size 450 mm x 450 mm x 1/6 of the full length of the support in the CC 1:4:8 ratio and plinthing of supports upto 300mm above ground level as per RESPO/ RES. drawing including back filling and proper ramming. |
| 39 | Earthing of supports with Earth Electrode 2.5 mtr. length including excavation of pit and driving M.S. Rod upto proper depth and connecting the earth electrode with the help of 6 SWG G.I. Wire and earthing lugs. RESPO/ RES. drawing.Earthingof each section pole is also to be done. (All type of clamps nut & bolt, washer to be provided by contractor.) |
| 40 | Erection/fixing for 33 KV /11 KVStay set with stay wire 7/8 SWG and clamp as per RESSPO drawing including binding, clambing, clamping, tightening, and nozzeling etc. complete in all respect including its grouting insize 0.60x0.60x0.3 mtr. ratio 1:4:8 of cement, sand and concrete (CC will be of cement coarse sand & Stone Grit). (All type of clamps nut & bolt, washer to be provided by contractor.) |
| 41 | Laying, spreading, lifting, Stringing, jointing and final sagging of ACSR Dog Conductor in accordance with profiles and sag chart including binding, jumpering and fixing of all accessories in 3 nos. conductor in parallel with PG Clamp binding wire etc as requested for job. |
| 42 | Laying, spreading, lifting, Stringing, jointing and final sagging of ACSR WEASALCONDUCTORin accordance with profiles and sag chart including binding, jumpering and fixing of all accessories in 3 nos. conductor in parallel with PG Clamp binding wire etc as requested for job. |
| 43 | Painting of following supports with one coat of red oxide primer and two coats of aluminum white paint of ISI mark and top danger portion of each support must be painted by providing two coat of Post Office Red Paint (1.5mtr upper portion of support.) Paint and material would be given by contractor to complete of job. (All materials to be provided by Contractor). |
| 44 | Single Pole of 11 M S.T.P |
| 45 | Double Pole of 11 M S.T.P |
| 46 | Four Pole of 11 M S.T.P |
| 47 | Providing & Fixing of 33 KV& 11 KV SMC Danger board ( as per RESPO/REC)with Clamp & Nut Bolt |
| 48 | Providing & Fixing of 33 KV& 11 KV SMC Number Plate ( as per RESPO/REC) with Clamp & Nut Bolt |
| 49 | Providing & Fixing of G.I. Barbed wire (2 Kg./pole) |
| 50 | Looping of branches of trees along the route of Line and disposal of the same after obtaining permission of competant Authority. |
| 51 | Laying & dressing of 33 KV 3x300 Sq.mm XLPE cable and Laying & dressing of 11 KV 3x185Sq.mm XLPE cable (Double CKT.)by excavation of trench in the ground of size 700mm wide, 1200mm deep providing 150mm fine sand cushion belowthe cable. The cable shall be duly protected by bricks, sand & stone slab and refilling & ramming of the left out soil. Spare cable shall be left and buried in the trench in the shape of rings at both ends. Cable laying work includes unrolling, cutting, making ring and sealing both ends of the cable.(All decentralised materials to be provided by Contractor). |
| 52 | Laying of 3x300 Sqmm 33 KV and 3 X185 SQMM KV, XLPE insulated U/G Cable in HDPE/G.I. Pipe size of 150 mm dia single circuit in open spaces with proper clamping, bolting and grouting(All material includeHDPE Pipe to be provided by contractor). |
| 53 | Hoisting of 33 KV 3X300 Sq. mm. / 11 KV 3X185 SQMM XLPE cable on double pole including G.I. pipe of size 6\" dia 3 M long and its jumpering complete with clamps, nuts and bolts. (All material include GI Pipe to be provided by contractor). |
| 54 | Cable Route Marker |
| 55 | High Pressure Testing |
| 56 | Dismantling of 33KV/11KV/3phase H.T. line on existing pole including rolling back its conductor/G.I. wire from work site to dump site. |
