Carrying Out Related Electrical Works For Proposed Bcc Back Up Control Center Under Adms Project At Src 2Nd Floor And Existing Place At Telephone Exchange Ground Floor Dadar, Gate No 3=2 Providing, installation, testing and commissioning Distribution L.V. Cubical panel (main switch gear panel) board consisting with as per Special Specification.Providing, Installation, Testing and Commissioning Distribution L.V. Cubicle Panelboard consisting with as per Special Specifications ( In telephone exchange room Ground floor). 3 Providing fixing and connecting 100 Ampere Four Pole Miniature Circuit Breaker in 16 SWG thick mild steel powder coated folding box (Box as per related MCB make & standard size) (For Server room & D.G.Set). 4 Providing, fixing and connecting 63 Ampere Four Pole Isolator in 16 SWG thick mild steel Powder coated folding Box (Box as per related MCB make & standard size) (At Gate No. 5 Service position & AC main near service position). 5 Providing, Fixing & Connecting 25 Ampere Two Pole 30 mA Earth Leakage Circuit Breaker 25 Ampere DP MCB Separate Unit with Neutral Link in M.S. Box. (For Relay room 1.5 Ton AC) 6 Providing, fixing and connecting 32/40 Ampere Two Pole ELCB/RCCB (30 milli Ampere Sensitivity) & 32/40 Ampere Two pole Miniature Circuit Breaker separate in 16 SWG thick mild steel Powder coated folding Box (Box as per related MCB make & standard size) (For AC in UPS room & server room 2 ton AC). 7 Providing, fixing and connecting 40 Ampere Two pole Miniature Circuit Breaker separate in 16 SWG thick mild steel Powder coated folding Box (Box as per related MCB make & standard size) (For LDB –I at Gate No. 5 Service position). 8 Providing, fixing and connecting lighting Single phase and Neutral (SPN) Miniature Circuit Breaker Industrial Double Door Distribution Board consisting with-i)40 Ampere Double pole Isolator-1 No.ii) 40 Ampere Double pole ELCB/RCCB-1No.iii)6 Ampere Single pole MCB-6 Nos.iv)16 Ampere S.P.MCB-4 Nos.v)Neutral link (For SPN LDB-I, in UPS Room & Projector and computer point). 9 Providing, fixing and connecting 200 Ampere Four pole Miniature Circuit Breaker in 16 SWG thick mild Steel powder coated folding box (Box as per related MCB & Standard size). 10 Providing, fixing and connecting 200 Ampere Four pole Moulded caseCircuit Breaker (50 KA) in S.S. board (Box as per related MCB & Standard size). 11 Providing, fixing and connecting 6 to 16 Ampere 3 pin Socket with Shutter & 2 Modular plate with PVC Unbreakable Moulded Box (For UPS room & telephone exchange room A.C.) in fall ceiling. 12 Providing, fixing and connecting 6 & 16 Ampere 3 pin Socket outlet point with 6 & 16 Ampere flush type control switch in 16 SWG thick folding powder coated box. (UPS point for LED projector screen) 13 Providing, fixing and connecting 6 & 16 Ampere combine 3 pin Socket with Shutter (3Nos), 16 Ampere Switch with Indicator(1 No), 16 Ampere Cut out (1No.), 8 Module Horizontal Regular plate (1No) & Unbreakable Box (For Computer). 14 Providing, laying, fixing and connecting 70 Sq.mm X 3.5 core Copper Conductor PVC X PVC insulated & Sheathed Armoured cable. 15 Providing, laying, fixing and connecting 35 Sq.mm X 4 core Copper Conductor PVC X PVC insulated & Sheathed Armoured cable. 16 Providing, laying, fixing and connecting 6 sq.mm. x 4 Core Copper Conductor Poly Vinyl Chloride Insulated and Poly Vinyl Chloride Sheathed Armoured Cable (for A.C. mains). 17 Providing, laying, fixing and connecting 4 Sq.mm X 4 core Copper Conductor PVC X PVC insulated & Sheathed Armoured cable. 18 Providing, laying, fixing and connecting 4 sq.mm. x 2 Core Copper Conductor Poly Vinyl Chloride Insulated and Poly Vinyl Chloride Sheathed Armoured Cable. (for UPS point & LDB). 19 Providing laying, fixing and connecting 2.5 Sq.mm. x 2 Core Copper Conductor Poly Vinyl Chloride Insulated and Poly Vinyl Chloride Sheathed Armoured Cable (for A.C.with Projector point). 20 Providing, laying, fixing and connecting 70 Sq. mm PVC Lead wire. 21 Tubelight Point. 22 Ceiling fan Point. 23 16 Ampere and 6 Ampere Socket on Separate switch board. 24 6 Ampere Socket point on existing Switch board with 14 SWG separate Copper earthing wire. 25 PVC Casing Capping wiring for Circuit main with 4 Sq.mm Copper wire (For Computer-Existing Circuit uses). 26 Providing, fixing and connecting 36 Watts LED Recess mounting size 600 mm X 600 mm panel type fitting as per special Specifications. 27 Providing, fixing and connecting 1200 mm Sweep Ceiling fan with Star rating fan & Secondary support. 28 Surface step type 100 W Electronic Ceiling fan regulator. 29 Providing, laying, fixing and connecting 6 SWG Copper Conductor Earthing Wire (For 70 Sq.mm Cable). 30 Providing, laying, fixing and connecting 10 SWG Copper Conductor Earthing Wire (For 35 Sq.mm X 4 core Cable). 31 Providing, laying, fixing and connecting 12 SWG Copper Conductor Earthing Wire (For 4 X 2 & 4 X 4Cable). 32 Providing, laying, fixing and connecting 14 SWG Copper Conductor Earthing Wire(For 1.5 X 2 for A.C.). 33 Providing, Erecting, fixing and connecting 600mm X 600mm Galvanised iron plate earthing job (For UPS room) (As Specification booklet). 34 Providing, fixing and connecting 25mm X 3mm Copper earthing strip to be fixed on the surface with Saddle, Spacers, Brass Screws etc. as per Special Specification. 35 Providing, laying, fixing and connecting 150mm X 32mm X 6mm thick Copper strip with 3/16 X 1” long brass nut bolt and washers, etc. 36 Providing, fabricating and fixing of Angle Iron frame for Switchgear& Other equipments etc. 37 Providing and laying 80mm Dia ‘B’ class G.I. pipe (for D.G. supply cable). 38 Providing, fixing and connecting Flange type brass gland size ‘0’ for 70 X 3.5 core cable with Copper lugs. 39 Providing, fixing and connecting Flange type brass gland size ‘1’ for 35 X 4 core cable with Copper lugs. 40 Providing, fixing and connecting Flange type brass gland size ‘4’ for 4 X 4 core cable with Copper lugs. 41 Providing, fixing and connecting flange type brass gland size No. ‘3’ for6 x 4 core cable with copper 2 lugs. 42 Providing, fixing & connecting flange type brass Gland size ‘4’ for 4 x 2 core cable with Copper Lugs. 43 Providing, fixing and connecting flange type brass gland size No. ‘5’ for 1.5 x 2 & 2.5 x 2 Core cables with copper lugs. 44 Providing, fixing and connecting Flange type brass gland size ‘5’ for 2.5 X 2 core cable with Copper lugs. 45 Providing and fixing 10 mm bakelite sheet. 46 Excavation and reinstatement of cable/pipe trenches. 47 Providing and fixing of SMC Junction box size 317 X 263 X 160 mm. 48 Forming notches, opening and grooves for conduit in the Brick wall. 49 Providing and fixing 1.6 thick (16 SWG) G.I. sheet (0.15M) on 25 mm X 25 mm teakwood batten for convening the cable teakwood batten & G.I. sheet shall be two coats of grey enamel paint (For server room). 50 Providing and fixing 1.6 thick (16 SWG) G.I. sheet (0.30M) on 25 mm X 25 mm teakwood batten for convening the cable teakwood batten & G.I. sheet shall be two coats of grey enamel paint (For UPS room). 51 Providing, layingand fixing 50mm dia PVC flexible heavy duty pipe with coupling & check nut (For UPS lead wire). 52 Dismantling of old existing wiring & fixtures as per special specifications. 53 Letter writing work for all Switchgear and fixtures with 25 mm wide English Alphabetical letter as per Specification.
