Tender For Construction Of Parikarma Marg Gate - Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches. 3 Providing and laying cement concrete in 1:4:8(1 Cement : 4 Coarcesand : 8graded stone aggregate 40 mm nominal size) and curing complete, Including cost of form work. in Foundation and floors.but in 1:4:8 in coarse sand 4 RCC Work Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) 5 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, including cost of centering, shuttering, finishing andexcludingreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 6 Reinforced cement concrete beam etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) 7 Reinforced cement concrete slab etc. above plinth level up to floor five level, including cost of centering, shuttering, finishing andexcludingreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) 8 Mild steelof Reinforced concrete or reinforced brick work (When not included in and an over all rates) brought to required shape as necessary including bending for proper completion of the work and including the supply of steel and its waistage Bend, hooks, Binding wire and authorized over lapping shall be measured upto floor two level. 9 Class -150brick work in1:4cement and coarsesandof2.25fineness modulus mortar in super-structureaboveplinth levelup to floor two level ( up to two storeys ) including necessarycutting andmouldingofbrickworkas required andalsoincludinghoney combed brick work in thickness of wall more than 12cms. 10 12 mm cement plasterinsingle coat on rough side ofsingle orhalfbrick wall forexteriorplasteringupto floortwolevel including brick walllevel including internal roundedangleschamfers, and / orroundedanglesnotexceeding80mmin girth and finishedeven and smooth No. extra for mixing anyadditive. 11 Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10metre height, backing filled with a grout of average 12 mm thick cementmortar 1:3 (1 cement : 3 coarse sand) including pointing in white cementmortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigmentmatching the stone shade : (To be secured to the backing and the sides bymeans of cramps and pins which shall be paid for separately) 12 30 mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement : 4 coarse sand), including finishing complete. 13 Providing and fixing red sand stone brackets 55x22.5x45 cm sunk andmoulded including providing and fixing with 4 Nos gun metal cramp25x6 mm 30 cm long 14 Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. 15 Providing and fixing stainless steel cramps of required size and shapefor anchoring stone wall lining to the backing or securing adjacent stonesin stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand),including making the necessary chases in stone and holes in wallswherever required 16 Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 17 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 18 PART-B RAYA HATHRAS MAINROAD NEAR RAJESWARI HOSPITAL 19 Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches. 20 Providing and laying cement concrete in 1:4:8(1 Cement : 4 Coarcesand : 8graded stone aggregate 40 mm nominal size) and curing complete, Including cost of form work. in Foundation and floors.but in 1:4:8 in coarse sand 21 RCC Work Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) 22 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, including cost of centering, shuttering, finishing andexcludingreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 23 Reinforced cement concrete beam etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) 24 Mild steelof Reinforced concrete or reinforced brick work (When not included in and an over all rates) brought to required shape as necessary including bending for proper completion of the work and including the supply of steel and its waistage Bend, hooks, Binding wire and authorized over lapping shall be measured upto floor two level. 25 Class -150brick work in1:4cement and coarsesandof2.25fineness modulus mortar in super-structureaboveplinth levelup to floor two level ( up to two storeys ) including necessarycutting andmouldingofbrickworkas required andalsoincludinghoney combed brick work in thickness of wall more than 12cms. 26 12 mm cement plasterinsingle coat on rough side ofsingle orhalfbrick wall forexteriorplasteringupto floortwolevel including brick walllevel including internal roundedangleschamfers, and / orroundedanglesnotexceeding80mmin girth and finishedeven and smooth No. extra for mixing anyadditive. 27 Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10metre height, backing filled with a grout of average 12 mm thick cementmortar 1:3 (1 cement : 3 coarse sand) including pointing in white cementmortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigmentmatching the stone shade : (To be secured to the backing and the sides bymeans of cramps and pins which shall be paid for separately) 28 30 mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement : 4 coarse sand), including finishing complete. 29 Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. 30 Providing and fixing stainless steel cramps of required size and shapefor anchoring stone wall lining to the backing or securing adjacent stonesin stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand),including making the necessary chases in stone and holes in wallswherever required 31 Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 32 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 33 Mild steel or iron work in heavy sizes such as trusses, built up gates record rack, roof work, gates etc. brought to required form including drilling holes revitting or welding where necessary, and also including supply of steel bolts, nuts, wastage etc. and their fixing require for proper completion of the work. 34 PART-C MAIN GATE AT-BALDEO TIRAHA 35 Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches. 36 Providing and laying cement concrete in 1:4:8(1 Cement : 4 Coarcesand : 8graded stone aggregate 40 mm nominal size) and curing complete, Including cost of form work. in Foundation and floors.but in 1:4:8 in coarse sand 37 RCC Work Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) 38 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, including cost of centering, shuttering, finishing andexcludingreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 39 Reinforced cement concrete beam etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) 40 Mild steelof Reinforced concrete or reinforced brick work (When not included in and an over all rates) brought to required shape as necessary including bending for proper completion of the work and including the supply of steel and its waistage Bend, hooks, Binding wire and authorized over lapping shall be measured upto floor two level. 41 Class -150brick work in1:4cement and coarsesandof2.25fineness modulus mortar in super-structureaboveplinth levelup to floor two level ( up to two storeys ) including necessarycutting andmouldingofbrickworkas required andalsoincludinghoney combed brick work in thickness of wall more than 12cms. 42 12 mm cement plasterinsingle coat on rough side ofsingle orhalfbrick wall forexteriorplasteringupto floortwolevel including brick walllevel including internal roundedangleschamfers, and / orroundedanglesnotexceeding80mmin girth and finishedeven and smooth No. extra for mixing anyadditive. 43 Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10metre height, backing filled with a grout of average 12 mm thick cementmortar 1:3 (1 cement : 3 coarse sand) including pointing in white cementmortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigmentmatching the stone shade : (To be secured to the backing and the sides bymeans of cramps and pins which shall be paid for separately) 44 30 mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement : 4 coarse sand), including finishing complete. 45 Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. 46 Providing and fixing stainless steel cramps of required size and shapefor anchoring stone wall lining to the backing or securing adjacent stonesin stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand),including making the necessary chases in stone and holes in wallswherever required 47 Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 48 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 49 Mild steel or iron work in heavy sizes such as trusses, built up gates record rack, roof work, gates etc. brought to required form including drilling holes revitting or welding where necessary, and also including supply of steel bolts, nuts, wastage etc. and their fixing require for proper completion of the work. 50 DEDUCT 5% DUE TO DEPARTMENTAL WORK
