Tender For Lan Wiring Work At Department Of Mechanical Engineering.; 1 Providing, installation testing & commissioning of Rack and other components 42 U server rack Floor standing with front door glass and side panel are removable with following accessories as viz.CMH -10X05 Mounting hardware, set of 10 cage nuts/CFT-02X01 Fan tray. 1U, 2-FAN Position, With Fans TOP mounted,Vertical Power Distribution Unit with 12 x 5/15 sockets Round Pin, 230 Volts AC, 32 Amp (Electronically controlled circuits for Surge & spike protection), CM/1UX05 Cable Manager, 1U, Steel Loops, 19/of Panduit (Pannet)/ Systimax/Rackom/ D-Link/Com-Rack/ Legrand/Netrack make with dismanteling ofold (damaged/broken) rack as required including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. 2 Providing, installation testing & commissioning of Rack and other components 12U wall mounting cabinets complete in all respectall respect including standard accessories :1U Cable Manager (02 Nos), Hardware Packet (1 No) , 4 Socket 5 Amp. Power Distribution Unit (1 No) Roof Mounted Fan Unit (1 No)of Panduit (Pannet)/ Systimax/Rackom/ D-Link/Com-Rack/ Legrand/Netrack make including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. 3 Providing, installation testing & commissioning of Cat 6 UTP patch panel fully loaded complete in all respect of D-Linkl/Panduit (Pannet)/ Systimax/Com-rack/rackom/Legrand/Molex make with dismantling of old patch pannel including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. 4 Providing, fixing, testing and commissioning of CAT 6, UTP LAN cable of Molex/ Schneider Amp/R&M/Finolex/Legrand in the existing PVC/ steel conduit/trunking as requiredalongwith punching/crimping & permanet numbering both ends (patch pannels switch side and IO port Side) anddismanteling of Old broken/damaged wiring if any including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. 5 Providing and fixing of 25mm dia PVC conduit (ISI Mark) along with the accessories (saddle and flexible must be stainless steel) in surface/ recess including painting in case of surface conduit or cutting the wall and making good in the same in case of recessed conduit as required with dismantling of damaged/ broken old conduitincluding entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. 6 Providing and fixing of PVC Trunking (ISI Mark)50*150*50 along with the accessories in surface/ recess including painting in case of surface conduit or cutting the wall and making good in the same in case of recessed conduit as required with dismantling of damaged/ broken conduit including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. 7 Providing and fixing of MS perfrated trunking50*150*50 along with the accessories in surface/ recess including painting in case of surface conduit or cutting the wall and making good in the same in case of recessed conduit as required with dismantling of damaged/ broken conduit including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. 8 Providing, installation testing and commissioning of CAT 6 Information outletwith British/American styleface plate having shutter on I/O or Face plate to avoid dust of Molex/ Schneider Amp/R&M/Finolex/Legrand/d-Link in the existing PVC/ steel conduit with dismantling of old installed I/O including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. 9 Providing, installation testing and commissioning ofCat 6 UTP Patch cord 1mtr- from rack end of Molex/ Schneider Amp/R&M/Finolex/Legrand/d-Linkd make including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. 10 Providing, installation testing and commissioning ofCat 6 UTP Patch cord 2 mtr- from rack end of Molex/ Schneider/ Amp/R&M/Finolex/ D-Link/Legrand make including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. 11 Shifting of48 core single mode LIU from exsiting Rack to 42 U (new rack) along with splicing and any other items/service etcincluding entire carriage of materials upto all leads, lifts, height and cost of all other incidentals. 12 Shifting of15 U rack including punching of 25 Nos LAN cables on Patch pannel including entire carriage of materials upto all leads, lifts, height and cost of all other incidentals.
