Supply Of Machinery Parts As Per Drawing Year 2025-26 , M.S. Roller For Mud Conveyor As Per Drg. 1268/R-2 Dated 22.06.09)Od 100Mmxlength 225Mm , Od 90Mm.Xlength 200Mm , Od75mm.X Length 630Mm , Od 100Mm X Length 740Mm , C.S. Trash Beam Bottom Bracket As Per Drawing No. B/2008/C-1357 Dated 09.07.08 Conversion Basis , G.R. Pressure Feeder Nose Plates Scrappers To Be Mfg. As Per Drawing No. B/94/C-1087/R-2 Dated 05.06.09 , G.R. Pressure Feeder Nose Plates Scrappers To Be Mfg. As Per Drawing No. B/94/C-1087/R-2 Dated 05.06.09, On Conversion Basis. , Cast Steel Swing Arm Left Hand/Right Hand (Gear Side) All Over Machined As Per Drawing No. B/2002/C-1265/R-2 Dated: 22.4.2009 , En-19 Forged Steel Spur Gear Pinion Having Machine Cut Teeth For Cane Unloader, As Per Drawing No. B/2001/C-1256/R-1, 33 Teeth. , En-19, Forged Steel Spur Gear Pinion Having Machine Cut Teeth For Caneunloader, As Per Drawing No. B/2001/C-1256/R-1, 68 Teeth. , C.S.Bearing Housing With Fitted 02 Nos. Lockingcamp. Plate For Roller Shaft For Mill (All Over Machined) To Be Manufactured As Per Drawing No. B/93/C-1011/R-2 Dated:13-06-2009 Material Cast Steel Is: 1030 Grade 27-54 , Dismentling Of Chopper Tubs And Replacement Of Worn Out Hubs By New Hubs, Fitting And Balancing As Per Drg. No. B/05/C-1129/R-1 , Replacement Of Bronze Linner Of Mill Hydralic Cap, Machining, Buffering, Fitting & Testing. , C.S.Sprocket On Conversion Basis As Per Drg. No. B/94/C-1056 , Maching Of Transmission Gear Shaft From Old Shaft As Per Drg. No. B/2001/C-1258/R-1(Material-Cl-4, Is-2004) , C.S Double Sprocket 76 Teeth For Welding & Machining With Teeth Cutting , C.S Double Sprocket 25 Teeth For Welding & Machining With Teeth Cutting , Pinion 38 Teeth Of New Main Bagasse Carrier Chain , Pinion 25 Teeth Of New Return Bagasse Carrier Chain , Pinion 52 Teeth Of Old Main Bagasse Carrier Chain , Pinion 25 Teeth Of Old Main Bagasse Carrier Chain , Worm & Worm Wheel For Crystlizer As Per Drg. No. B/73/C-310 , Worm As Per Drg. No. B/75/C310 , En-9 Forged Steel Pin For Mill “A” Frame As Per Drg. No. B/2010/C-1377 Dated: 12.06.2010. (2 Section Per Pin) , C.S. Gr 26/52 Is-1030 Machined Knife Holder Hub For Cane Leveler As Per Drg. No. B/2007/C-1337/R-1 Dt. 17.07.2022 (Without Key) , Repair Of Links Hole Of Block Type Chain , C.I. Idler For Cane Carrier As Per Drg. B/2007/C-1340 On Conversion Basis With Machining , Repair Of Pinion Teeth-38 Of Bagasse Elevator , C.S. Sprocket Wheel 14 Teeth For Cane Carrier Head Shaft Maics-26/52, Is 1030 As Drg. No. B/94/C-1041/R2 Dt. 20.06.2007 , En-24 Helical Pinion With Shaft No. Of Teeth-19, Od-90Mm, Root Dia-72Mm,Teeth Face Wide-180Mm, Total Pinion Shaft Length-490Mm As Per Sample , Leaf Spring Supporting Frame For Grader As Per Drg. No. B/2022/C-1530. Type-1 (Spring Steel Flat Size 75 X 8Mm) , En-9 Steel Shaft For Mill House Crane As Per Drg. No. B/2020/C-1571, Mark-1 , Repair Of Chain Block 02 Ton Cap. , Repair Of Chain Block 01 Ton Cap. , Repair Of Chain Block 05 Ton Cap. , Repair Of Chain Block 03 Ton Cap. , En-9 Forged Steel Pin For Mill “A” Frame As Per Drg. No. B/2010/C-1377 Dt. 12.06.2010 (2 Section Per Pin) , Metalon/Teflon Ptef Bush For Rotary Screen As Per Drg. No. B/2024/C-1562 Dt. 04.07.2024 , Brass Seat For Juice Heater Double Beat Valve Size 8” As Per Drg. No. B/2024/C-1564 Dt. 14.07.2024
