Tender For Repairing Of Bituminous Road From Ppl Junction To Railway Station At Paradip.; 1 Cutting the shrubs, bushes, cleaning, removing & disposing the debrises away from the site by Private Vehicles with all leads and lifts including levelling, dressing the ground with supply of all labour, T&P,taxes excluding GST, hire and running charges of vehicles including fuel, consumables, tollage etc. complete as directed by the Engineer-In-Charge. (Excluding GST) 2 Earth work in all kind of soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth and the Earth transported by transport vehicles as directed by the Engineer-in-charge. (Excluding GST) 3 Making 50 mm x 50 mm furrows, 25mm/ 50mm deep, 450 to the center line of the road and at one metre interval in the existing thin bituminous wearing coarse including sweeping and disposal of excavated material within 1000 metres lead with supply of all material labour transporation hire and running charge of equipments, taxes , tollage , royalties etc all complete but excluding GST as directed by EIC 4 Providing & layingquarry dust of aprroved as sub-base in layers not exceeding 225mm thickeach watering and compacting to the required density in O.M.C with Vibratory Roller with supply of all material labour transporation hire and running charge of equipments, taxes , tollage , royalties etc all complete but excluding GST as directed by EIC 5 Providing, laying, spreading and compacting stone aggregates of IRC Gr-II(63 mm to 45 mm ) size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling withvibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite and to fill up the interstices of coarse aggregate with Quarry dust , watering and compacting to the required density as per clause 404 of MORTH specification for Road & Bridge works with supply of all material labour transporation hire and running charge of equipments, taxes , tollage , royalties etc all complete but excluding GST as directed by EIC 6 Providing, laying, spreading and compacting stone aggregates of IRC Gr-III(53 mm to 22.4 mm ) size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling withvibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite and to fill up the interstices of coarse aggregate with Quarry dust , watering and compacting to the required density as per clause 404 of MORTH specification for Road & Bridge works with supply of all material labour transporation hire and running charge of equipments, taxes , tollage , royalties etc all complete but excluding GST as directed by EIC 7 Providing & laying 37.5mm thick built up spray grouting in one layers 37.5mm thick using 0.45cum of 25mm to 40mm size hard granite metal and 12.00Kg penetration grade of bitumen for 10 Sqm & 0.12cum of 12mm size hard granite chips as key stone for 10 Sqm spreading over and laying including heating pouring and spreading bitumen metal and chips and rolling with PRR after scraping cleaning the road surface applying tack coat using 3.0Kg of bitumen for 10 Sqm including Supply of all material , labour , T&P, hire and running charge of Equipments , taxes ,tollage etc all complete but excluding GST. as ditrected by EIC. 8 Providing and applying primer coatby emulsion pressure distributer with bitumen emulsion on prepared surface of granular Base including brooming of road surface and cleaning the forigh materials by using air compressior before applyingand spraying primer at the rate of 0.60 kg/sqm with supply of all material labour transporation hire and running charge of equipments, taxes , tollage , royalties etc all complete but excluding GST as directed by EIC. 9 Providing and laying75 mm thick bituminous macadam withhot mix plant producing an average output of 75 tonnes per hour using crushed aggregates 40 mm-25 mm @ 15%,25-10 mm @45%,10-5 mm @25%, 5mm @15% of total volume of chips adding premixed with bituminous binder of VG-30 bitumen of 3.1% of total volume, transported to site, laid over a previously prepared surface with paver finisherto the required grade, level and alignment and rolled by VRRto achieve the desired compaction as per clauses 501.6 and 501.7with supply of all material labour transporation hire and running charge of equipments, taxes , tollage , royalties etc all complete but excluding GST as directed by EIC(For New work) 10 Providing and laying25 mm thickdense semi dense bituminous concrete withhot mix plant producing an average output of 75 tonnes per hour using crushed aggregates ,,10-5 mm @57%, 4.75 mm and below @41% and stone dust @2% of total volume of chips adding premixed with bituminous binder of VG-30 bitumen of 5% of total volume, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled by VRRto achieve the desired compaction as per clauses 501.6 and 501.7with supply of all material labour transporation hire and running charge of equipments, taxes , tollage , royalties etc all complete but excluding GST as directed by EIC 11 Providing and laying the tack coat over the prepared granular or bituminous surface 0.20 Kg/Sqmwith supply of all material labour transporation hire and running charge of equipments, taxes , tollage , royalties etc all complete but excluding GST as directed by EIC) 12 Blinding road surface with 6mm thick Quarry Dust over the final surface of bitumen with supply of all material labour transporation hire and running charge of equipments, taxes , tollage , royalties etc all complete but excluding GST as directed by EIC 13 Engagement of hydraulic excavator with supply of all operator, lubricants, T &P, etc all complete as directed by Engineer in charge excluding cost of GST. 14 Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holessupply of all materials, T&P, labour, Hire and running charges, of all machineries, safety measures, taxes excluding GST etc., all complete as directed by Engineer-In-Charge. 15 Supply of labour, machineries, T&P, single phase power supply unit etc. for core cutting in concrete works of following specifications including cutting in to size perfectly in uniform shape including Port entry fees, all taxes, hire and running charges of all machineries, equipments, Generator (DG Set) for single phase power supply, cost of fuel and consumables, operator expenses etc. all complete excluding GST and as per direction of Engineer in charge. 16 Supplying of 150mm diaGI Pipe medium quality conforming to IS-1239, part -1 (2004) transporting, cutting, placing, proper fixing of GI with cost & expenses of all materials, tools and plants,labour charges, machineries, taxes, tollages, VAT, Port entry feesetc allcomplete as per direction of Engineer in charge (Excluding GST).
