|
| 1 | Earth work in excavation of foundation trenches ordrains, in all sorts of soil (including mixed soil butexcluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m.as directed. The item includes necessary trimming thesides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm.Ref. Page- 1, Item -2,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm.including watering and ing etc. layer by layercomplete. (Payment to be made on the basisent of finished quantity of work)(b) With eart ained by freshxcavation (includingcost of excavation upto 1,800 mm. depth) fromarranged by the Deptt. within a lead of 100 m.Ref. Page- 16, Item -16,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 3 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or infoundation or in foundation trenches.Ref. Page- 47, Item -3, PWD SOR Vol-I w. e. f. 1.11.2017 |
| 4 | Cement concrete with graded jhama khoa (30 mmsize) excluding ShuteringIn ground floor and foundation.(a) 1:3:6 proportionRef. Page- 23, Item -1, a) PWD SOR Vol-I w. e. f. 1.11.2017 |
| 5 | Brick work with 1st class bricks in cement mortar (1:6)(a) In foundation and plinthRef. Page- 15, Item -8,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 6 | 25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer\"s specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface).Ref. Page- 47, Item -1,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 7 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, pla -cing in proper position and binding with 16 gauge black anne -aled wire at every intersect- ion, complete as per drawing and direction.Ref. Page-43, Item -40,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 8 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground flooras per relevant IS codes.a) Pakur VarietyRef. Page- 26, Item -10,I,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 9 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) inground floor.Ref. Page- 16, Item -16, PWD SOR Vol-I w. e. f. 1.11.2017 |
| 10 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or strai -ght including fitting, fixing and striking out after completion of works (upto roof of ground floor)Ref. Page-42, Item -36,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 11 | a) M.S.or W.I. Ornamental grill of approved design joints conti -nuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.Ref. Page-104, Item -13,i)PWD SOR Vol-I w. e. f. 1.11.2017 |
| 12 | Supplying, Fitting & Fixing 30 mm thick Factory made moulded Door shutter, consisting of solid core single leaf flash door of 30 mm thick ness lipped with 15 mm [5mmx3] thick x 30 mm wide on one style and top rail and 10 mm [5mmx2] thick x 30 mm wide of the other style and bottom rail. The inner panel laminated with 2 mm thick termite proof water proof and fire resistant moulded PVC sheet with raised panel designed in different plain/ or Prelam colour on one side after routing the moulded design on flash door and 2mm plain and or Prelam PVC sheet on other side using rubber adhesive on flash door and solvent cement adhesive on the PVC lipping etc. complete excluding hardwares as necessary as per direction of Engineer-in Charge, Manufacturer‟s Specification and drawing.. In ground floor.(a) Moulded door using 2 mm moulded PVC sheet or 2 mm etched moulded PVC sheet on one side & 2 mm PVC sheet on other side.Ref. Page- 133, Item -25,a)PWD SOR Vol-I w. e. f. 1.11.2017 |
| 13 | (A) Glazed aluminium sliding windows made of extruded and annodizedalloy aluminium sectios, fabrications, including cutting to proper shapeand size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDMgasketing in between window frame and masonry work (walls, column,beam.lintels etc.) as well as between glass and shutter frame for fixingglass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass asper drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene /EPDM gasket, locking arrangement and rollers.i ) 2 track sliding window.Ref. Page-239, Item -2A),i, PWD SOR Vol-I w. e. f. 1.11.2017 |
| 14 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or hamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excludingcost of chipping over concrete surface](i) With 1:6 cement mortar(c) 15 mm thick plasterRef. Page- 16, Item -16,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 15 | Neat cement punning about 1.5mm thick in wall, dado,window sill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m.Ref. Page- 192, Item -15,PWD SOR Vol-I w. e. f. 1.11.2017 |
| 16 | (a) Priming one coat on steel or other metal surface with synthetic Oil bound primer of approved quality including smoothening surfacessandpapering etcRef. Page- 200,Item -1(a)i, c, PWD SOR Vol-2 w. e. f. 1.11.2017 |
| 17 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand paperingingusing of approved putty etc. on the surface, if necessary :b) On steel or other metal surface :With super gloss (hi-gloss) -(iv) Two coats (with any shade except white) Page- 200, Item -2(A)b,( iv), PWD SOR Vol-2 w. e. f. 1.11.2017 |
| 18 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or newsurfacetoeceivedecorative te xtured (matt finish) orooth finish acrylic exterior emulsion paint including scraping and preparing the hly,complete as per manufactur- er\"s specification and as per direction of theEICIn Ground Floor:(a) One CoatPage- 196, Item -8(a), PWD SOR Vol-2 w. e. f. 1.11.2017 |
| 19 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat)a) Normal Acrylic EmulsionPage- 197, Item -17,(a), PWD SOR Vol-2 w. e. f. 1.11.2017 |
| 20 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directedwith topping made with ordinary or white cement (asnecessary) and marble dust in proportion (1:2) includingsmooth finishing and rounding off corners including rakingout joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75kg/sq.m all complete including all materials and labour.Ref. Page- 48, Item -6,iii)PWD SOR Vol-I w. e. f. 1.11.2017 |
| 21 | Supplying, fitting & fixing UPVC pipes A-Type and fittings conforming toIS:13592-1992 with allnecessary clamps nails, including making holes inwalls, floor etc. cutting trenches in any soil through masonry concretestructures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.(i) 75 mm. Dia.Ref. Page-212, Item -21,i)PWD SOR Vol-I w. e. f. 1.11.2017 |
| 22 | Add 18 % GST |
| 23 | Add 1 % Cess |
