Shifting Of Ug Cabling Network At Nunwan Pahalgam- 1 11 KV3 corecableSupply , Laying & dressing ,testing and commissioning of following size 11kV POWER CABLES XLPE(E) insulated , FRLS,Aluminium conductor armoured underground cables suitable for working voltage upto 11000 volts,stranded,compact circular aluminum conductor conforming to IS:7098 (Part II/1985) with latest amendments , in the excavated cable trenches as per drawingno. CE/P&P/DWG/2023/UGC/001 DATED : 17-03-2023and instruction of the Site Engineer, laying of Caution /WarningTape excluding its cost over the cable with specified clearance from cable top and GL as per IS :1255:1983(Reaffirmed 1996) , excluding the cost of trench excavation and sand .The cable should be of Polycab,KEI,Gupta Power,Universal cable,RR Kabel Power,RPG Cables ,Skytone Cables,Diamond Power Inframake or manufacturers with equivalent ISO/IS certification or any other make approved by Project wing KPDCL. 2 3 core 120 mmsqrXLPE(E) 3 3 core 300 mmsqrXLPE(E) 4 Excavation in any type of soil including hard laterite soil for formation of cable trenches & backfilling of available excavatedsoil includingprimary compaction of trenchesas per direction of Site Engineer and as per approved Drawing no.CE/P&P/DWG/2023/UGC/001 DATED : 17-03-2023 ) with transportation, shifting, handling, removal of debris etc. all complete in all respectand restoring into working condition as per site requirements and instructions of site engineer 5 Supply,transportation by mechanical transport (including headload ) laying/spreading of sand cushion for the cable as per direction of Site Engineer and as per approved Drawing no.CE/P&P/DWG/2023/UGC/001 DATED : 17-03-2023 6 Supply,transportation by mechanical transport (including headload ), laying of RC.C covers of 300 mm (Width) X 300 mm (Length) X 60 mm (Thickness) for covering under ground cable suitablly as per requirement for mechanical protection to the cable,including necessary connections. 7 Installation of Cement Concrete Cable route marker of cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom & 50 cm X 50 cm at the top with a thickness of 10cmat every 100 Meters or as per direction of site engineer duly engraving with letters“KPDCL 11 KV UGcableas applicable with an arrow (→) letter showing distance and depth at which cable is buried on a smooth and clean finished surface confirming to IS 5820-2001 with painting of 2 coats of apex over coat of primer with yellow shade and the letters with contrast red shade . 8 Supply and laying of Caution /WarningTape(LDPE plastic tape(1500mm wideX500 mm long with thickness of P100 microns(0.1 mm) as per GTC) over the cable with specified clearance from cable top and GL) as per IS :1255:1983(Reaffirmed 1996) 9 Reinstatement of roads by way excavation of soil and laying of M15 grade concrete of .2 m thickness. Complete job 10 11 KV Cable Termination Kits Supply ,fixing & commissioning of heat shrinkable type Cable Termination Kit_ Indoor/outdoorType suitableforfollowing size 3 core 11 KV cablesalong with necessary accessories complete with all kit contents including earth continuity connection along with 3 nos. crimpling type aluminium lugs / thimbles of suitable capacity including making joints etc. in an approved manner complete as required & as per specifications of Raychem RPG,Frontire Technology.Yammuna Power,Balaji Engineers,3M India ,Cospower Engg. make ormanufacturers with equivalent ISO/IS certification or any other make approved by Project wing KPDCL. 11 3 core 120 mmsqrXLPE(E) 12 3 core 300 mmsqrXLPE(E) 13 11 KV straight Through JointsSupply ,fixing & commissioning of heat shrinkable typeStraight ThroughCableJointingKits_ Indoor/outdoorType suitableforfollowing size 3 core 11 KV cablesalong with necessary accessories complete with all kit contents including earth continuity connection along with 3 nos. crimpling type aluminium lugs / thimbles of suitable capacity including making joints etc. in an approved manner complete as required & as per specifications of Raychem RPG,Frontire Technology.Yammuna Power,Balaji Engineers,3M India ,Cospower Engg. make ormanufacturers with equivalent ISO/IS certification or any other make approved by Project wing KPDCL. 14 3 core 120 mmsqrXLPE(E) 15 3 core 300 mmsqrXLPE(E) 16 Supply,installation,testing and commissioning of Earthing : Earthing with G.I. earth pipe 3 metre long, 40 mm dia through GI strip 25X3 mm . Complete job as per REC/IS standards 17 Brick Masonary Chamber : Constructing masonry chamber 900x900x1050mm. inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover & frame to be not less than 38 kg (weight of cover 23kg & weight of frame 15 kg) & RCC top slab 1:2:4 mix (1 cement :2 coarse sand& : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand& : 10 graded stone aggregate 40 mm nominal size) & inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand&) 12 mm thick, finished with a floating coat of neat cement complete as per standard design with common burnt clay F.P.S. (non modular ) bricks of class designation 7.5 18 Supply and fixing of GI Pipe , Medium class , ISI marked , 150 mm dia with required no of collars for road crossing including termination points 19 1.1 KV LT cableSupply , Laying & dressing ,testing and commissioning of following size 1.1kV LT CABLES XLPE(E) insulated , FRLS,Aluminium conductor armoured underground cables suitable for working voltage upto 1100 volts,stranded,compact circular aluminum conductor conforming to IS:7098 (Part II/1985) with latest amendments , in the excavated cable trenches as per drawingno. CE/P&P/DWG/2023/UGC/001 DATED : 17-03-2023and instruction of the Site Engineer, with supply and laying of Caution /WarningTape(LDPE plastic tape(1500mm wideX500 mm long with thickness of P100 microns(0.1 mm) as per GTC) over the cable with specified clearance from cable top and GL) as per IS :1255:1983(Reaffirmed 1996) , excluding the cost of trench excavation .The cable should be of Polycab,KEI,Gupta Power,Universal cable,RR Kabel Power,RPG Cables ,Skytone Cables,Diamond Power Inframake or manufacturers with equivalent ISO/IS certification or any other make approved by Project wing KPDCL. 20 1 core 120 mmsqrXLPE(E)LT CABLE( 3 Phase 4 Wire with one spare) 21 2 core 95 mmsqrXLPE(E)LT CABLE 22 Excavation in any type of soil including hard laterite soil for formation of cable trenches & backfilling of available excavatedsoil includingprimary compaction of trenchesas per direction of Site Engineer and as per relevant IS with transportation, shifting, handling, removal of debris etc. all complete in all respectand restoring into working condition as per site requirements and instructions of site engineer 23 Supply,transportation by mechanical transport (including headload ) laying HDPE pipes outer dia 120 mm and inner dia 108 mm for laying of the LT cablesincluding collars , bendstee offs and all other necessary accessories as per the relevant IS and direction of Site Engineer and as per approved Drawing for 2 core 95 mm sq cable 24 Supply,transportation by mechanical transport (including headload ) laying HDPE pipes outer dia 90 mm and inner dia 78 mm for laying of the LT cablesincluding collars , bendstee offs and all other necessary accessories as per the relevant IS and direction of Site Engineer and as per approved Drawingfor single core 120mmsq cable 25 Supply,transportation by mechanical transport (including headload ), laying of RC.C covers of 300 mm (Width) X 300 mm (Length) X 60 mm (Thickness) for covering under ground cable suitablly as per requirement for mechanical protection to the cable,including necessary connections, 26 Supply ,fixing & commissioning of heat shrinkable type Cable Termination Kit_ Indoor/outdoorType suitableforfollowing size LT cablesalong with necessary accessories complete with all kit contents including earth continuity connection along with requisite no crimpling type aluminium lugs / thimbles of suitable capacity including making joints etc. in an approved manner complete as required & as per specifications of Raychem RPG,Frontire Technology.Yammuna Power,Balaji Engineers,3M India ,Cospower Engg. make ormanufacturers with equivalent ISO/IS certification or any other make approved by Project wing KPDCL. 27 1 core 120 mmsqrXLPE(E)LT CABLE 28 2 core 95 mmsqrXLPE(E)LT CABLE 29 Supply ,fixing & commissioning of heat shrinkable typeStraight ThroughCableJointingKits_ Indoor/outdoorType suitableforfollowing sizeLT cablesalong with necessary accessories complete with all kit contents including earth continuity connection along with requisite No of crimpling type aluminium lugs / thimbles of suitable capacity including making joints etc. in an approved manner complete as required & as per specifications of Raychem RPG,Frontire Technology.Yammuna Power,Balaji Engineers,3M India ,Cospower Engg. make ormanufacturers with equivalent ISO/IS certification or any other make approved by Project wing KPDCL. 30 1 core 120 mmsqrXLPE(E)LT CABLE 31 2 core 95 mmsqrXLPE(E)LT CABLE 32 Brick Masonary Chamber : Constructing masonry chamber 900x900x1050mm. inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover & frame to be not less than 38 kg (weight of cover 23kg & weight of frame 15 kg) & RCC top slab 1:2:4 mix (1 cement :2 coarse sand& : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand& : 10 graded stone aggregate 40 mm nominal size) & inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand&) 12 mm thick, finished with a floating coat of neat cement complete as per standard design with common burnt clay F.P.S. (non modular ) bricks of class designation 7.5 33 Dismantalling and carriageof 15 No. STP 9 Mtr to Divisional stores Bijbehara 34 Supply , installation testing and commissioning of 8m longSP-15steel Tubular poles including pit excavation . 35 Earthing of the pole by GI pipe 40mm 3 metre long through GI strip 25X3 mm 36 LT FEEDER PILLARS Single/Three PHASE:- 37 SITC of CPRI approved make ,3 phase, 415V, 1no of 250 Amps incoming 3 TP MCCBs (Breaking 25KA) fitted with outgoing 03 No 100 Amps SP MCCBs, 1No. 63 Amps 3 pole MCCB for outgoing LT cables,Outdoor Type, Double door, compartmentalised,Distribution feeder Pillar suitable for outdoor installation , made out of CRCA sheet painted through 7-tank process with PU painted Busbars 4P, Aluminium with heat shrinkable sleeves and inter-connection with solid/strandred copper conductor wire/copper strips, gl&s neutral links, name plate & pad locking facility etc.etc., complete as required with detailed specification complete with all accesories 4 way Distribution Feeder Pillar. Thevendor should be approved by Project wing/Distribution wing of KPDCL. 38 SITC of CPRI approved make ,3 phase, 415V, 1no of 100 Amps incoming 3 TP MCCBs (Breaking 25KA) fitted with outgoing 03 No 63 Amps SP MCCBs, 1No.40 Amps 3 pole MCCB for outgoing LT cables,Outdoor Type, Double door, compartmentalised,Distribution feeder Pillar suitable for outdoor installation , made out of CRCA sheet painted through 7-tank process with PU painted Busbars 4P, Aluminium with heat shrinkable sleeves and inter-connection with solid/strandred copper conductor wire/copper strips, gl&s neutral links, name plate & pad locking facility etc.etc., complete as required with detailed specification complete with all accesories 4 way Distribution Feeder Pillar. Thevendor should be approved by Project wing/Distribution wing of KPDCL. 39 SITC of CPRI approved makesingle phase 2 wire, 415V, 1nos of 100 Amps incoming SP MCCBs fitted with outgoing 04 No 32 Amps SP MCBs for Service Connections, Distribution Service Pillar suitable for outdoor installation , made out of CRCA sheet painted through 7-tank process with PU painted Busbars 2P, Aluminium with heat shrinkable sleeves and adequate capacities complete with all accesories 4 way Distribution Service Pillar. The vendor should be approved by Project wing/Distribution wing of KPDCL. 40 SITC of CPRI approved makesingle phase 2 wire, 415V, 2nos of 40 Amps incoming SP MCCBs fitted with outgoing 06 No 16Amps SP MCBs for Service Connections, Distribution Service Pillar suitable for outdoor installation , made out of CRCA sheet painted through 7-tank process with PU painted Busbars 2P, Aluminium with heat shrinkable sleeves and adequate capacities complete with all accesories 4 way Distribution Service Pillar. The vendor should be approved by Project wing/Distribution wing of KPDCL. 41 Supply and fixing of Support Galvanised angle frame and legs (50mm x 50 mm x 6 mm) for Distribution Feeder Pillar , leg height 1m with 0.3m in soil approx 7m@4.50Kg per mtr,(for 10 Nos3 phase feeder pillers) 42 Supply and fixing of Support Galvanised angle frame and legs (40mm x 40 mm x 3 mm) for Distribution Feeder Pillar with leg height 1m with 0.3m in soil approx 7m@1.8Kg per mtr. ( for 38 Nos single phase feeder pillers) 43 Cement grouting for support angle legs of feeder pillars @ 0.5 cum per leg (48 nos) 44 16 Mtr. ( polygonal) HighMast Lights 45 Fabrication, Supplying, Erection, Testing and Commissioning of16 metre long Polygon high mast with 20 telescopic sections (20 side polygon), - Top 150 mm and Bottom (350-500) mm dia having, (minimum overlap distance of 1.5 times of topsection) thickness as per BSEN 10025 grades 355 JO/ASTM A572-50 , steel sheet plate for shaft suitable to withstand a wind velocity of(45-50)m/s as per IS 875 part 3(as per GA Drawing). Base plate as per IS 2062/ASTM A572-50. The mast shall be Galvanized in single Hot-dip as per BSEN ISO 1461/ASTM A123 with an average65- 70 microns as per IS 2629, and welded as per BS 5135 Single L-Seam joint . The mast shall have internalpower tool , motorised,(Suitable reversible geared motor operating on 230/415V, 50Hz,),mounted at the base compartment for raising and lowering of the lantern carriage.(Complete job including all accessories). The bottom shaft of mastmust havedoor having locking arrangement. The mast shall havegalvanized lantern carriage way ( suitable dia with max load carrying capacity as per IS 1239) suitable for carrying 12 Nosflood lights and its control box( excluding cost of lights ). The mast shall be erected on the new ly constructedRCC footing. The mast shall be supplied with 3 mm thick template, lightning arrester (lightning finial) of 1.2m length galvanized pipe with top arrow fitted on top of the head frame cover and GLS type aviation twin obstruction light. (excluding foundation) as per technical data.( for further details refer to the SBD). Bajaj / Ventura/Transrail / Aster /utkarsh or equivalent ISO certified company. 46 Supply installation testing and comm. of Energy saving, environmental friendly, long life,flood light luminaries. Theyshall be grey epoxy powder coated die-cast aluminium housing withnframe, non integral type,IP66 , suitable for high mast application, heat resistant clear toughened glass fixed to the frame with silicon rubber gasket with electrochemically brightened, olished and anodized aluminium reflector with cast aluminium control gear box, copper ballast and 200 W LED lamps. Control gear box for appropriate wattage Havell /Crompton/ Philips/ SYSKA/Eq. Standard makeincluding the service connection 47 Supply and fixing of foundation boltssas specified in the drawing, manufactured from guaranteed performance high tensile strength special steel, hot dip galvanized , holding down boltssupplied with precision made steel template including nuts washers etc. 48 Casting of suitable shallow raft foundation, as given in the drawingusing specified grade of RCC M 20 considering a safe soil bearing capacity of site as 10T / sq m at 2 meter depth ; including the cost of centering , shuttering , etc. Provision shall also be made for cable entry at the bottom of the pole. 49 Providing of earthing using G.I plate earthing ( 2x2) and G.I strip risers along with associated material as per I.S standards to the high mast. 50 S.I.T & C of twin dome aviation obstruction lights of type BJAOL -2 with two nos incandescent lampsBajaj makeor equivalent of Philips/Crompton as approved 51 S.I.T & C of dust vermin and weather / flame proof out door compartmentalized feeder pillar of suitable size made of 14 SWG M.S. sheet complete with the following:-63 A TPN MCB incomer,single dial time switch (24 hour Electronic timer ),Heavy duty godown lock,Termination ofincoming/outgoing cables with suitable sizes of ferrules & compression gland,45 A contactor for automatic switching on and off luminaries, 9 A two contactors and raise, lower push buttons for motor operation. 52 Dismantling of old High Mast Lighting System (complete Job) 53 Additional Items 54 Supply of 11kV, Three core 120 mm2 Aluminium round wire Armoured XLPE Cable , FRLS 55 Supply of 11kV, Three core 300 mm2 Aluminium round wire Armoured XLPE Cable , FRLS 56 Supply of 120 mm²SingleCore, 1.1kV Grade, Armoured, XLPE Insulated Stranded Conductor FRLS type 57 Supply of 95mm² 2 Core, 1P 2W Cable,1.1kV Grade, Armoured, XLPE Insulated Stranded Conductor FRLS type 58 Providing of vehicle Bolero/Scorpio/Innova or equivalent for officials for full duration during execution of work for supervision/Inspection of the work including fuel and driver 59 Supply of safety/testing/inspection and other relateditemsas detailed in Annexure A 60 Supply and fixing of Numerical Relay for Breaker(ADR 2415) of Ashida make 61 Supply ofthe Cable termination Kit suitable for 11 KV3 core 120 mm sqr XLPE cable 62 Supply ofthe Cable termination Kit suitable for 11 KV3 core 300 mm sqr XLPE cable 63 Supply ofthe Cable termination Kit suitable for LT 2 core 95 mmsqr mm sqr XLPE cable 64 Supply ofthe Cable termination Kit suitable for LT 1 core 120 mmsqr mm sqr XLPE cable 65 Supply ofthe Straight throughKit suitable for 11 KV3 core 120 mm sqr XLPE cable 66 Supply oftheStraight throughKit suitable for 11 KV3 core 300 mm sqr XLPE cable 67 Supply ofthe Straight throughKit suitable for LT 2 core 95 mmsqr mm sqr XLPE cable 68 Supply ofthe Straight throughKit suitable for LT 1 core 120 mmsqr mm sqr XLPE cable
