Repairing Work As Per Requirement In In Diff. Muni. Buildings In Ranip Ward In West Zone.-1 10.00 Excavation for foundation up to1.5 m depth including sorting out and stacking of useful materials and disposing theexcavated stuff upto 50 Meter lead.(A) Loose or soft soil 10.00 1.5 to 3.0 mt.depth 2 10.00 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidation each deposited layer by ramming and watering. 3 10.00 Filling in plinth with sand underfloors including watering ramming, consolidating and dressing etc. complete. 4 10.00 Filling in foundation and plinth with murrum or selected soil layers of 20 cm. thickness including watering, ramming and consolidating etc. 5 10.00 Providing and laying cement concrete1:5:10 (1-Cement: coarses sand and:10-hand broken stone aggregates 40mm nominal size) and curing complete excluding cost formworkin (A) Foundation and Plinth (upto 10 ton). 6 10.00 Providing and laying cement concrete1:4:8 (1-Cement: coarses and:8-hand broken stone aggregates 40mm nominal size) and curing complete excluding cost of formworkin (A) Foundation and Plinth (upto 10 ton). 7 10.00 Providing and laying cement concrete 1:3:6 (1-Cement : coarse sand : 6- hand broken stone aggregates 40 mmnominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth.. 8 10.00 Providing and laying cement concrete 1:3:6 (1-Cement:3-coarse sand:6-hand broken stone aggregates 20mm nominal size) and curing complete including cost of formwork in (A) wall caps/coping (upto 10 ton).. 9 10.00 Providing and laying cement concrete work 1:2:4 (1- Cement 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base or columns and Mass concrete 10 10.00 Providing and laying cement concrete work 1:2:4 (1- Cement 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork and reinforcement for reinforced concrete work in (B) Slabs, landing, shelves, Balconis , Lintels, Beams, Girders and Cantilever upto floor two level. 11 10.00 Providing and laying cement concrete work 1:2:4 (1- Cement 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork and reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts upto floor two level. 12 10.00 Provdg. & laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregates 20 mm nominal size) for reinforced concrete chhajjas not exceeding 10 cm. thickness upto floors two level including finishing the exposed surfaces with cement mortar 1:3 (1 cement : 3 find sand) to give a smooth and even surface centering and form work and curing complete excluding cost of reinforcement. 10.00 Providing and laying in position Ready Mixed M-150 grade concrete for reinforced cement conctere work, using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work intransit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures inrecommended proportions as per IS:9103 to accelerate/ retard setting of concrete, improve work ability without impairing strength and durability as per direction of theEngineer-in-charge. Without Fly Ash (Min cement level as per latest IS456 shall be maintained) (Cement level 320 kg ) 10.00 Providing and laying in position Ready Mixed M-200 grade concrete for reinforced cement conctere work, using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work intransit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS:9103 to accelerate/ retard setting of concrete, improve work ability without impairing strength and durability as per direction of theEngineer-in-charge. Without Fly Ash (Min cement level as per latest IS456 shall be maintained) (Cement level 400 kg ) 10.00 Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement conctere work, using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work intransit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS:9103 to accelerate/ retard setting of concrete, improve work ability without impairing strength and durability as per direction of theEngineer-in-charge. Without Fly Ash (Min cement level as per latest IS456 shall be maintained) (Cement level 450 kg ) 10.00 Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work, using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work intransit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS:9103 to accelerate/ retard setting of concrete, improve work ability without impairing strength and durability as per direction of theEngineer-in-charge. Without Fly Ash (Min cement level as per latest IS456 shall be maintained) (Cement level 475 kg ) Providing and laying in position Ready Mixed M- 350 grade concrete for reinforced cement conctere work , using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. Without Fly Ash(Min cement level as per latest IS 456 shall be maintained) (Cement level 500 kg Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (B) Walls, from top of foundation level upto floor two level Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (C) Slabs,landing,shelves,Balconies Lintels, Beams, Girders and Cantilever upto floor two level. Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts upto floor two level. Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (E) Staircases excluding landing upto floor two level Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (K) Vertical and Horizontial its upto floor two level. Providing and Laying ordinary cement concrete 1:2:4 (1- Cement 2 coarsesand: 4-graded stone aggregates 20 mm nominal size) and finishing smooth with curing etc. complete including the cost of form work but excluding the cost of reinforsement for R.C.C work in (iv) Slabs having more than 13 cm and upto 15 cm.thickness Providing and Laying ordinary cement concrete 1:2:4 (1- Cement 2 coarsesand: 4-graded stone aggregates 20 mm nominal size) and finishing smooth with curing etc. complete including the cost of form work but excluding the cost of reinforsement for R.C.C work in (iv) Slabs having more than 8 cm and upto 10 cm.thickness 15.00 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)( Conventional 15.00 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)( Modular 15.00 Extra for brick work in superstructure above plinth level upto floor two level (B) Conventional 15.00 Extra for brick work in superstructure above plinth level upto floor two level (A) Modular 15.00 Extra for brick work in superstructure above floor two level Item No. 2(6.13) (A) Modular per 15.00 Extra for brick work in superstructure above floor two level Item No. 2(6.13) (B) Conventional 30.00 Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:5 ( 1- Cement : 5 coarse sand ) in foundation and Plinth conventional brickwork (up to 10 ton) 30.00 Extra for half brick masonry in super structure above plinth level upto floor two level (B) conventional 3.00 Providing and laying Pre cast Light weight concrete hollow core wall with hollow core concrete unit of approved make & size 92 mm thick, 600 mm wide and 2400 mm/ 2600 mm/ 2850 mm/ 3000 mm/ 3300 mm in legth made from of controlled cement concrete M20 having cube compressive strength not less than MP a jointing with high strength & tensile adhesion non-shrink cementitious joint compound /P.U. Foam. (Plaster not required) 3.00 Providing and laying Pre cast Light weight concrete hollow core wall with hollow core concrete unit of approved make & size 120 mm thick, 600 mm wide and 2400 mm/ 2600 mm/ 2850 mm/ 3000 mm/ 3300 mm in legth made from of controlled cement concrete M20 having cube compressive strength not less than 20MP a jointing with high strength & tensile adhesion nonshrink cementitious joint compound/ P.U.Foam. (Plaster not required) 3.00 Providing and laying Pre cast Regular concrete hollow core wall with hollow core concrete unit of approved make & size 92 mm thick, 600 mm wide and 2400 mm/ 2600 mm/ 2850 mm/ 3000 mm/ 3300 mm in legth made from of controlled cement concrete M35 having cube compressive strength not less than MP a jointing with high strength & tensile adhesion non-shrink cementitious joint compound/ P.U.Foam. (Plaster not required) 3.00 Providing and laying Precast Regular concrete hollow core wall with hollow core concrete unit of approved make & size 120 mm thick, 600 mm wide and 2400 mm/ 2600 mm/ 2850 mm/ 3000 mm/ 3300 mm in legth made from of controlled cement concrete M35 having cube compressive strength not less than 35 MP a jointing with high strength & tensile adhesion non-shrink cementitious joint compound /P.U.Foam. (Plaster not required) - 8 - 30.00 Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete. 30.00 Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (B) Flat surfaces such as soffits of supspened floors slabs Landings and the like. (1) Floors etc. upto 200 mm in thickness. 30.00 Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (B) Flat surfaces such as soffits of suspended floor roof slabs Landings and the like. (2) Floors etc. above 200mm in thickness. 30.00 Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (C) Vertical surface such as walls (any thickness) partitions and the like including attached buttresses & string course & the like. 30.00 Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders Bressumers and Lintels not exceeding 1 M. in Depth. 30.00 Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (G) Columns PillarsPosts and struts. (1) Square Rectangular Polygonal in plan. 30.00 Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (G) Columns PillarsPosts and struts. (2)Circular or curved in Plan. 30.00 Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders Bressumers and Lintels not exceeding 1 M. in Depth. 30.00 Providing and fixing 35 mm thick shutters for Doors, windows and clear story windows including anodised alluminium butt hinges with necessary screws.(A) Indian Teak Wood (1) Fully Panelled 30.00 Providing and fixing 35 mm thick shutters for Doors, windows and clear story windows including anodised alluminium butt hinges with necessary screws. (A) Indian Teak Wood (ii) Fully Glazed. 30.00 Providing and fixing 35 mm thick shutters for Doors, windows and clear story windows including anodised alluminium butt hinges with necessary screws. (A) Indian Teak Wood(iii) Partly panelled and partly glazed. 30.00 (Providing and fixing 35 mm thick shutters for Doors, windows and clearstory windows including blackenamelled M.S. butt hinges with necessary screws. (A) Indian teak wood. (i) Fully Panelled. 30.00 (Providing and fixing 35 mm thick shutters for Doors, windows and clearstory windows including blackenamelled M.S. butt hinges with necessary screws. (A) Indian teak wood. (ii) Fully Glazed. 3.00 Providing and fixing 35 mm thick shutters for Doors, windows and clearstory windows including blackenamelled M.S. butt hinges with necessary screws. (A) Indian teak wood. (iii) Partly panelled and partly glazed. 3.00 Providing and fixing 35 mm thick panelled ,glazed or panelled and glazed shutters, for Doors windows and clearstory windows including anodised alluminium But hinges with necessary screws and indian teak wood shutters with. (A) Plywood sheet panels. 3.00 Providing and fixing 35 mm thick panelled ,glazed or panelled and glazed shutters, for Doors windows and clearstory windows including anodised alluminium But hinges with necessary screws and indian teak wood shutters with. (B) Particle board panels 3.00 Providing and fixing 35 mm thick panelled ,glazed or panelled and glazed shutters, for Doors windows and clearstory windows including anodised alluminium But hinges with necessary screws and indian teak wood shutters with. (C) Hard board panels. 3.00 Providing and fixing 35 mm thick panelled ,glazed or panelled and glazed shutters, for Doors windows and clearstory windows including anodised alluminium But hinges with necessary screws and indian teak wood shutters with. (D) Asbestos sheet panels. 3.00 Providing and fixing 25 mm thick shutters for cupboards etc. including anodised alluminium butt hinges with necessary screws. (A) Indian teak wood. (i) Fully Panelled. 3.00 Providing and fixing 25 mm thick shutters for cupboards etc. including anodised alluminium butt hinges with necessary screws. (A) Indian teak wood. (ii) Fully Glazed. 3.00 Providing and fixing 25 mm thick shutters for cupboards etc. including anodised alluminium butt hinges with necessary screws. (A) Indian teak wood. (iii) Partly panelled and partly glazed. - 10 - 3.00 Providing and fixing plain asbestos cement sheet 6 mm thick in partitions including fixing to fames with screws etc, complete with 50 mm x 12 mm Deodar wood beading (Frames to be paid separately) (upto 10 ton) 3.00 Providing and fixing in partitions 4 mm thick medium hard board of approved quality including fixing to fames with screws etc complete with 50 mm x 12 mm teak wood beading (Frames to be paid separately) (upto 10 ton) 3.00 25 mm thick wooden shelves supported on 40 x 40 mm x 6 mm T or L iron brackets fixed at suitable distances but not exceeding 75 cm. apart with Mango wood or equivalent quality. (upto 10 ton) 3.00 40 mm thick wooden shelves supported on 40 x 40mm x 6 mm T or L iron brackets fixed at suitable distances not exceeding 75cm. Apart with Mango wood or equivalent quality. (upto 10 ton) 3.00 Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows.(upto10 ton) 3.00 Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws (A) Plain Grill. (upto 10 ton) 3.00 Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws (A) Ornamental Grill. (upto 10 ton) 3.00 Providing and fixing glazed louvered glass windows and ventilators with teak wood frame 10 cm. x 7 cm. size including 3 coats of oil painting to wood work etc.complete. (upto 10 ton) 3.00 Providing and fixing 35 mm thick shutters for Doors, windows and clere story windows including Indian teak wood frames 10 cm x 7 cm. size including anodized alluminium fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete.(ii) Fully Glazed. 3.00 Providing and fixing 35 mm thick shutters for Doors, windows and clere story windows including Indian teak wood frames 10 cm x 7 cm. size including black enamelled iron oxidixed fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete.(ii) Fully Panelled. 3.00 Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows including Indian teak wood frames 10 cm x 7 cm. size including anodized alluminium fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. (iii) Partly panelled and partly glazed. 3.00 Providing and fixing 30 mm thick FACTORY MADE SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S.tubes of 19 gauge thickness and size of 19 mm x 19 mm for stiles and 15 mm x 15 mm for to p and bottom rails.M.S. frames hall have a coat of steel primers of approved make and manufacture, M.S. frames hall be covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 x 50 mm formings tiles, and 5 mm thick 75 mm wide PVC sheets for to prail, lock rail and bottom rail on either side, and 10 mm (5 mm x 2) thick, 20 mm wide cross PVC sheet as gap insert for to p rail and bottom rail, Panelling of 5 stiles and rails with 30 mm wide x 5 mm thick PVC sheet beading on eighter side, and joined together with solventcement adhesive,. An additional 5 mm thick PVC strip of 20 mm width is to be stculkon the interiors ide of the ‘c’ channel using PVC solventcement adhesive etc. complete as per direction of Engineer incharge, manufacture’s specification and drawing. 3.00 Providing and fixing in position collapsible steel shutters with vertical channels 20 x 10 x 2 mm braced with flat iron diagonal 20 x6 mm size with top and bottom rails T iron 40 x 40 x 6 mm with 38 mm dia steel pulleys complete with bolts, units, locking arrangements, stoppers, handles, including a priming coat of red lead paint & approved make. 3.00 Providing and fixing 1 mm thick M.S. sheet sliding shutters with frame and diagonal braces of 40x40x6 mm angle iron, 3.15 mm M.S.gusset plates at Junctions and corners 25 mm dia. pulley, 40x40x6 mm angle and T-iron huide rail at top and bottom respactively with handles, stoppers and locking agangement etc, including applying a priming coat of red lead paint. (upto 10 ton) 3.00 Providing and fixing rolling shutters of approved make made of 80 mm wide M.S.laths inter-locked together through their entire length and jointed together at theends by end locks mounted on specially designed pipe shaft with bracket plates, guide channels and arragements for inside and out side locking with pushpull operation including the cost of hood cover and spring etc. complete. (A) Shutters having width below 3.5 M. 3.00 Providing and fixing rolling shutters of approved make made of 80 mm wide M.S.laths inter-locked together through their entire length and jointed together at theends by end locks mounted on specially designed pipe shaft with bracket plates, guide channels and arragements for inside and out side locking with pushpull operation including the cost of hood cover and spring etc. complete. (A) Shutters having 3.5 M. & Above 3.00 Providing & Fixing in position Alluminium doors with frame using approved quality anodised extruded alluminium section as approved by Engg.in charge(Jindal alluminium) (a) Frame sections 101.6x44.45 mm (b) Shutter bottom vertical & top section 83.5x44.45 (wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter bottom section at 114.3x44.45 mm at (1.37kg/mt) Shutter middle section at 100x44.3 wt.(1.37 kg/mt) incl.providing & installing 5 mm thick approved color Acrylic sheet of standard quality fixed with glazing chips on upper pannel & Laminated sheet on lower pannel (wtt.0.13 kg/Rmt) etc.comp.as direction of engg.in charge. 3.00 Providing and fixing extruded aluminum window having extruded aluminum Colour Powder Coated section frame main outer size 127mm x 38.10mm x 1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four track member size 122.20mm x 31.75mm x 1.10mm @ Wt. 1.205 Kg/mt,vertical member of size 122.20mm x 31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt with - 12 - sliding shutters of horizontal member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,vertical member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,@ with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc 3.00 Providing and fixing standared extruded of alluminium section of size 63 mmx38.10 mmx1.2 mm (Jindal Section:2434, @ Wt.0.643 Kg/mt) with colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for Ventilation 3.00 Providing and fixing standared extruded of alluminium section of size 63 mmx38.10 mmx1.2 mm (Jindal Section:2434, @ Wt.0.643 Kg/mt) with colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for Ventilation 3.00 Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with colour Powder Coated alluminium frame with 5 mm thick transparent bronze colour tinted float glass as details etc complete for Fix window. 3.00 Providing and laying 40 mm thick marble chips flooring rubbed and polished (I.E.terrazo) to granolithic finish with under layer 30 mm thick cement concrete1:2:4 (1-Cement: 2-coarse sand: 4- graded stone aggregate 10 mm and down gauge) and to player 10 mm thick with white, black or white and blak marble cihps of required sizes from 1 mm to 4 mm nominal size laid in cement marble powder mix 3:1 (3- Cement:1-Marble powder by weight) in proportion of 4:7 (4- Cement: 7-marble chips by volume) (C) Medium Shade pigment with approx 50% white cement and 50% ordinary cement (In top layer only) (upto 10 ton) 3.00 Providing and laying marble chips skirting (Terrazo) or dedo rubbed, and polished to Granolithic finish to player 6 mm white, black or white and black marble chips of size from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3-Cement: 1 marble powder by weight) in proportion of 4:7 (4-cement marble powder mix: 7- marble chips by volume) (B) Light shade pigment with white cement (In top layer only) 3.00 Providing and laying white glazed tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement. 3.00 Providing and laying Ceramic tiles 6 mm thick in flooring treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3 (1- cement :3-coarses and) finishing with flush pointing in white cement.(upto 10 ton) 3.00 Providing and laying Vitrified tiles 8 to 10 mm thick, 36x36 in flooring treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3 (1-cement:3-coarses and) finishing with flush pointing inwhite cement. (upto 10 ton) 3.00 Providing and laying Vitrified tiles 8 to 10 mm thick, 24x24 in skrting risers of steps and dedo on 10 mm thick cement plaster 1:3 (1- cement: 3-coarse sand) and jointed with white cement slurry (upto 10 ton) 3.00 Providing and laying Vitrified tiles 8 to 10 mm thick, in skrting risers of steps and dedo on 10 mm thick cement plaster 1:3 (1- cement:3- coarse sand) and jointed with white cement slurry (upto 10 ton) 3.00 P & L 24 x 24 vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for DARK shade 3.00 P & L 24 x 24 vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit 3.00 Providing and laying polished Kota stone slab flooring over 20 mm (Average) thick base of cement mortar 1:6 (1-cement:6- coarses and) or L.M.1.1.5 (1-Lime putty:1.5-coarses and) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25 mm thick (upto 10 ton) 3.00 Providing and laying marble stone slab flooring over 20mm (average)base of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with gray cement slurry including rubbing and polishing complete. (A) Marble slab 25mm thick 3.00 Providing and laying polished Kota stone slab flooring over 20 mm (Average) thick base of cement mortar 1:6 (1-cement:6- coarses and) or L.M.1.1.5 laid over and jointed with grey cement slurry including rubbing and polishing etc.complete. (B) 30 mm thick (upto 10 ton) 3.00 Providing and laying polished kota stone slab 25 mm thick in risers of steps, skirting Dedo and pillars laid on 10 mm thick cement mortar 1:3 (1- Cement :3 coarses and) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc.complete. (upto 10 ton) 3.00 Providing and laying cement concrete flooring 1:2:4 (1- cement: 2-coarses and:4-graded stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of neat cement. (A) 40mm thick. (upto 10 ton) 3.00 Providing and laying cement concrete flooring 1:2:4 (1- cement: 2-coarse sand:4-graded stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of neat cement. (B) 50mm thick. (upto 10 ton) 3.00 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30 cm length, 30 cm height and 15 cm thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level, filling the joint with C:M 1:3 (1 cement :3 fine sand) etc complete. (upto 10 ton) 3.00 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line and level 3.00 Providing and laying broken china mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface using white cement including rounding off junctions and extending them up to15 cm along the wall, clearing with water and oxalic acid etc .asdirected. 50.00 Providing and laying coloured glazed tiles of the size 300 mmx200 mmx8 mm/300 mmx450 mmx8 mm in skirting, risers of steps and dedo on 10 mm. thick cement plaster 1:3 (1cement: 3 coarse sand) & jointed with white cement slurry. 3.00 Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and nuts 8 mm diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead complete excluding the cost of purlins, Rafters and Trusses. (1) 0.80 mm thick sheet.(up to10 ton) 3.00 Providing ridges or hips 600 mm over allin plain G.I. sheet class-3 fixed with G.I. J or L Hooks and nuts 8 mm dia G.I. Limpet and bitumen washer complete. (1) 0.80 3.00 Providing and fixing 150 mm wide 450 mm over all semi circular plain G.I.sheet class-3 gutter with Iron brackets 40 mmx3 mm size Bolts, Nuts, washers etc. including making necessary connection with rain water pipes. (i) 0.80 mm thick 3.00 Providing and fixing five courses water profing treatment with bitumen felt consisting of second and fourth course of blown/ bitumen or/and residual bitumen applied hot at 1.2 kg.per Sq.M.of area for each course and first course with fibre base bitunen saturated under lay type land third course with fibre base self finished felt type 2 grade 1 and fifth and final course of stone grit 6 mm and down size or pea sizes gravel spread at 0.008 Cu.Metre/Sq.metre preparation of surface excluding grading complete. (upto 10 ton) including 3.00 Providing and fixing on wall face C.I. Rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1:2(1- Cement : 2-fine sand) (A) 75 mm dia. 3.00 Providing 15 mm thick cement plaster in single coat on Rough (Similar) side of single or half brick walls for interior plastering up to floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement :3-sand) - 15 - 3.00 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. 3.00 Colour washing with lime on wall surface (two coats) over and including a primary coat of white washing to give an even shade after through brooming the surface to remove all dirt, dust, mortar drops and other foreigh matter. 3.00 Removing dry or oil bound distemper by a washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete. 3.00 Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on wall surfaces of given an even shade, over and including a priming coat of whiting after thoroughly brooming the surface free from mortar dropping and other foreign matter. 3.00 Distempeing (Two coats) with oil bound distemper of approved brand and manufacture and of required shade on wall surfaces to give an even shade, over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth. 3.00 Extra Coat for Above Item over above for every subsequent coat of approved brand and manufacture. 3.00 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. 3.00 Extra over item for every sub sequent coat of wall painting with plastic emulsion paint of approved brand 3.00 Extra over item for painting with plastic emulsion paint of approved brand on ceilings and sloping roofs. 3.00 Applying priming coat over new steel and other metel surface after and including preparing the surface by throughly cleaning, oil, grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead. 3.00 Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleaning the surface of all dirt, dust and other foreign matter. 3.00 Painting one coats (excluding priming coat) on previously painted steel and other metal surface with enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. 3.00 Extra over item for every sub sequent coat of paint. 3.00 Painting two coats (excluding priming coat) on new steel and other metal surface with synthetic enamel paint, brushing to give an even shade including cleaning the surfaceofalldirt,dust and other foreign matter. 3.00 Painting one coats (excluding priming coat) on previously printed steel and other metal surface with synthetic enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. 3.00 Extra over Above item for every sub sequent coat of paint. 3.00 Painting two coats (excluding priming coat) on external surface of new rain water, soil, waste and vent pipes and fittings with ready mixed bituminous brushing, black, anti corrosive to give an even shade including cleaning of all dirt, dustand other foreign matter.(75 mm dia) 3.00 Painting two coats (excluding priming coat) on external surface of new rain water, soil, waste and vent pipes and fittings with ready mixed bituminous brushing, black, anti corrosive to give an even shade including cleaning of all dirt, dust and other foreign matter.(100 mm dia) 3.00 Appliying priming coat over new wood and wood based surface after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting. (B) Ready mixed paint brushing wood primier pink. 3.00 Appliying priming coat over new wood and wood based surface after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting. (C) Ready mixed paint brushing priming for enamel 3.00 Extra over item 59 for every subsequent coat of priming coat. (B) Ready mixed paint brushing wood primier pink. 3.00 Extra over item 59 for every subsequent coat of priming coat. (C) Ready mixed paint brushing priming for enamel 3.00 Painting two coats (excluding priming coat) on new wood and wood based surface with ready mixed paint, brushing, oil, gloss, semi gloss to give and even shade including cleaning of all dust, dirt and other foreign matters and papering and stopping. 3.00 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete 3.00 Applying two coats of Birla (white cement based) or Asian (acryliclapy-putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. 3.00 Writing letter or figures on any surface with black japan paint (stops, comas, hyphens and the like not to be measured and paid for separately) (i) Block (Letters/Figures) (Per 10 Letter pet CM.HT) 3.00 Extra over items for using thick white paint instead of black japan paint. (i)Block (Letters/Figures) 3.00 Writing letter or figures on any surface with black japan paint (stops,comas, hyphens and the like not to be measured and paid for separately) (ii) Indian (Letters/Figures) 3.00 Extra over items for using thick white paint instead of black japan paint. (ii) Indian (Letters/Figures) 3.00 Painting lines, deashes, arrows, letters etc on roads, Air fields and like in two coats with road marking paint, brushing including cleaning the surface of all dirt, dust and other foreign matter. (i)Over 10cmi n width 3.00 Painting lines, deashes, arrows, letters etc on roads, Air fields and like in two coats with road marking paint, brushing including cleaning the surface of all dirt, dust and other foreign matter.(ii) Upto 10 cm in width 3.00 Painting lines, deashes, arrows, letters etc on roads, Air fields and like in one coats with road marking paint, brushing including cleaning the surface of all dirt, dust and other foreign matter. (i)Over 10cm in width 3.00 Painting lines, deashes, arrows, letters etc on roads, Air fields and like in one coats with road marking paint, brushing including cleaning the surface of all dirt, dust and other foreign matter. (ii) Upto 10cm in width 3.00 Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) R.C.C. work 3.00 Demolition of Brick work and stone masonry including stacking of serviceable materil as and disposalof unserviceable materials with all lead and lift.(ii) In Cement Mortar. 3.00 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materil as and disposal of unserviceable materials with all lead and lift. 3.00 Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable materil as and disposal of unserviceable materials with all lead and lift.(i) G.I.sheet roofing. 3.00 Dismentling steel work including distempering and stacking the materials with all lead and lift. 3.00 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, hold fasts and other attachment etc. complete and stacking the material within all lead and lift.(i) Not exceeding 3 Sq.M. in area. 3.00 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves,hold fasts and other attachment etc. complete and stacking the material with in all lead and lift.(ii) Exceeding 3 Sq.M.in area. 3.00 Dismentling barbed wire in fencing including making rolls and also including dismentling fencing posts including all earth work concrete in base and making good the disturbed ground stacking useful materials as directed and disposing as directed and disposing of the unserviceable materials with all lead and lift. 3.00 Dismentling C.I. pipes G.S.W. pipes abd A.C. rain water pipes with fittings and clamps including stacking the materials with all lead and lift (for any dia, of pipe) 3.00 Dismantling santtary fittings like wash basin . W.C. pan Indian and Europe an type, flushing tank etc. including stacking the materials with all lead and lift 3.00 Scraping oil paint from steel and other metal surface and making the surface even (with Hand Scraping.) 3.00 Removing and scraping of old deteriorated plaster of any thickness from wall / R.C.C member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift 3.00 Providing and fixing M.S. fan clamps of shape and size as specified in existing R.C.C. slab including cutting chase and making good. 3.00 Cutting out cracks of roof terrace to V-section, cleaning out, wetting, grouting with cement and sand slurry 1:3 (1-cement 3- sand ) (upto 10 ton) 3.00 Cutting out cracks roof terrace to V-Section cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand (1:1 by weight) (up to 10 ton) 3.00 Providing and fixing of Ridge flashing for roof panel shall be made out of 0.5 mm thick pre coated GI sheet. The Pre coatedsheet shall be of minimum 240 mpa steel grade confirming to IS 14246:1995 and shall have zinc coating of minimum 120 gsm as per IS:277:1992, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micron. The PP GI Sheet shall have plastic protective guard film of minimum 25 microns to avoid scratches during transportation. The ridge shall be fixed to the steel members by poprivetor self drilling/self stitching fastners @ maximum 450mm c/c along length of capping/flashing etc complete . 3.00 Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle posts 40 mm x 40 mm x 6 mm and oil painting 3 coats fixed at 2.5 Mt, C/c. with five Horizontan lines and two diagonals of galvanised steel barbed wire weighting 9.38 Kg. per 100 Metre, strained and fixed to posts with G.I, staples including fixing the posts in ground with 0.5 M x 0.5.M x 0.5 M. block in C.C 1:5:10 etc complete. 3.00 Renovation and Repairing work in Chainlink fencing any size and also refixing work incl. febrication work with all materails to be painted one coat of primer and twocoats of paint as directed inline and level. 3.00 Constructing a sink (chowkedi) with C.C. 1:2:4, 12 cm. thick over B.B. masonry in C.M, (1:6) in front and dwarf wall 1.0 Mt. high and 23 cm. thick cement plaster to masonry / in C.M.1:3) and cement concrete flooring in 1:2:4: mix 5cm.dia.drain pipe etc.complete. 3.00 Constructing a cooking platform 60 cm. width and 70 cm high resting on B.B. Masonry walls 23 cm. thick in C.M. (1:6) with (i) Fixing or precast R.C.C. 1:2:4) 8 cm. thick slab with marble chips set in C.M. (1:6) (6 mm thick terrazo) with plastering on exposed faces walls in C.M. (1:4) etc complete. 3.00 Carring out timber treatment to all wood work including drilling holes and spraying oil based chemical solution on surface of timber work for termite control including labour and material etc. complete. Using Chlordene 20 EC. As Per 6113_part III Consentration Weight1.00 percent is recommended one litre chemical emulsion dillute with 9 liter of kerosene precent concentration. Total dillute concrentration will be 10 litre inclusive of the litre chemical emulsion appication 0.75 / Litre chemical per one Sqmt printed two coat wood surface. 3.00 Applying general insecticide pest control treatment to floors, cup boards etc including labour material etc. complete. Using Heptachloride 20 EC. As Per 6113_pests Consentration Weight 0.50 percentis recommended one litre chemical emulsion dillute with 39 liter of water will give. Total dillute concrentration will be 40 litre inclusive of one litre chemical emulsion appication 0.5 Litre chemical / Sqm of surface is recommended as per I.S 3.00 Carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite control treatment including labour and material consist ment with I.S. specification. Using Chlordene and Chior purfiles 20 EC. As Per 6131_paret-II Consentration Weight on percentis recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1% concrentration inclusive of one litre chemical emulsion appication attherate of 5 Litre chemical / Sqm of surface is recommended as per I.S 3.00 Carrying out wall treatment for termite control including spraying with chemical solution in oil base (0.5 Lit./Sq.M.) including labour and material Using Hepachlor concentration 20 EC. As Per IS.6316_paret-II Consentration by Weight 0.50 percentis recommended i.e one litre chemical emulsion dillute with 39 liter go fIS concrentration total dillite concentration will be 40 litre inclusive of one litre chemical emulsion appication at the rate of 7.5 Litre chemical / Sqm of surface is recommended as per I.S 3.00 Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary fittings and connection etc. complete on terrace 0.00 Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes (Medium grade) of the following nominal bore, tube fitting and clamps including making good the wall ceiling and floor. 3.00 (A) 15mm (upto 10 ton) 3.00 (B) 20mm (upto 10 ton) 3.00 (C) 25mm (upto 10 ton) 3.00 (D) 32mm (upto 10 ton) 3.00 (E) 40mm (upto 10 ton) 3.00 (F) 50mm (upto 10 ton) 0.00 Providing and laying in trenches galvanised mild steel tubes (Midium grade) of the following nominal bore, and tube fitting (Earth work in trenches to be measured and paid for separately) 3.00 (A) 15mm (upto 10 ton) 3.00 (B) 20mm (upto 10 ton) 3.00 (C) 25mm (upto 10 ton) 3.00 (D) 40mm (upto 10 ton) 3.00 (E) 65mm (upto 10 ton) 3.00 (H) 80mm (upto 10 ton) 3.00 Making connection of galvanised Mild steel distribution branch with galvanised mild steel main 50 mm to 80 mm nominal bore by providing and fixing tee including cutting and threading the pipes complete. 0.00 Providing and fixing to wall ceiling and floor 6.0 Kg.F/Cm2 working pressure poluthene pipes of the following out side Dia. Low densidy, complete with special falnge compression type fittings,wall clips etc.including making good the wall ceiling and floor. 3.00 (A) 20 mm 3.00 (B) 25 mm 0.00 Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2 working pressure polythene pipes of the following out side Dia. Low densidy, complete with special falnge compression type fittings, wall clips etc. including making good the wall ceiling and floor. 3.00 (C) 32mm 3.00 (D) 40mm 3.00 (E) 50 mm 3.00 (F) 75mm 3.00 (G)110 mm 3.00 Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter of self cleaning design with C. screaed down or higned grating including cost of cutting and making good the walls and floor 100 mm inlet and 50 mm outlet.(C)100mm dia. 3.00 Providing and fixing water closet squatting Pan (Indian type W.C.Pan) size 580 mm (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) (A) Vitreous China. (I)Long pattern = White colour 3.00 Providing and fixing wsh down water closet (Europe an type, W.C.Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar1:1 (1- Cement:1-fine sand) (Seal and cover to be measured and paid forseparately) (A) vitreous China Pattern :(i) in white colour 3.00 Providing and fixing 100 mm size P or S trap for water closet squatting pan including jointing the trap with the pan and soil pipe in cement Mortar1:1 (1-Cement : 1-Fine sand)(A) Vitreous China.Pattern in white colour 3.00 Providing and fixing wash basin with single hole for pillar tap with C.I.or M.S. brackets painted white including sutting holes and making good the same but excluding fittings. (A) Vitreous China: (ii) Flat Back wash basin 550 mm x v 400 mm size.(i) In white colour. 3.00 Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including cutting holes in walls and making good the same but excluding fittings. © Vitreous China Sink. (i) 600 mm x 450 mmx 150 mm size 3.00 Providing and fixing 600 mm x 450 mm bevelled edge mirrror of superior glass mounted on 6 mm thick A.C. sheet or ply wood sheet and fixing to wooden pluge with C.P. brass screws and washers. 3.00 Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete.(ii) 25mm dia. 3.00 Providing and fixing C.P. brass towel rail comlete with C.P.brass brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size. 3.00 Providing and fixing 600mm x 120mm glass shelf with C.P. brass bracket and guard rail complete mixed to wooden plug with C.P. brass screws. 3.00 Providing and fixing toilet paper holder. (A) C.P.Brass 3.00 Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap polished bright. (i) 15mm dia. 3.00 Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap polished bright. (ii) 20mm dia. 3.00 Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap. (i) 15mm dia. 3.00 Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap. (ii) 20mm dia. 3.00 Providing and fixing screw down bib taps of following size.(C) Gun metal screw down bib tap. (i) 15mm dia. 3.00 Providing and fixing screw down bib taps of following size.(C) Gun metal screw down bib tap.(ii) 20mm dia. 3.00 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia 3.00 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (ii) 20mm dia. 0.00 Providing and fixing Gun metal check or non-return fullway wheel valve. 3.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 15mm dia. 3.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(B) 20mm dia. 3.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia. 3.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(D) 32mm dia. 3.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia. 3.00 Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete. 3.00 Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete.(i) 20mm dia. 3.00 Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete.(ii) 25mm dia. 3.00 0 Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete.(iii) 32mm dia. 3.00 Providing and fixing Urinal or approved quality including conecting the Urinal with waste pipe , tap etc.complete. (A) White earthen ware flat back or corner type size 430mm 260mm x350mm. 3.00 Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal flush pipe. (A) Squating plate pattern white earthen ware 550mm x 300mm. 3.00 Providing and fixing chromium plated, bottle trap with necessary couplings of approved quality for wash basin. 3.00 Providing and fixing ball cock ofapproved quality as directed. (A) Copper Metal (i) 25mm dia. 3.00 Providing and fixing ball cock of approved quality as directed. (B)Abonite (i) 25mm dia. 3.00 Providing laying and jointing in true line and level 15 mm dia. U.P.V.C. Pipe (SCH-40) for cold water including fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with solvent, including cost of all materials.adhesive 3.00 Providing laying and jointing in true line and level 25 mm dia. U.P.V.C. Pipe (SCH-40) for cold water including fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX orequivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 3.00 Providing laying and jointing in true line and level 32 mm dia. U.P.V.C. Pipe (SCH-40) for cold water including fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 3.00 Providing laying and jointing in true line and level 40 mm dia. U.P.V.C. Pipe (SCH-40) for cold water including fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 3.00 Providing laying and jointing in true line and level 50 mm dia. U.P.V.C. Pipe (SCH-40) for cold water including fittings make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials. 3.00 Providing & Fixing 3 mm thick F.R.P.sheet of Approved Quality & Color / Pattern as per Consultants design also includes required fabrication structure in the grid of 2-0x2-0 size using hollow pipe of16 gauge & size 2x1 & 1x1 ,G.I. & Bitumen Washers, Silicon paste application for fixing the sheet . Rate also includesnecessary bending, cutting, labor charges , Zinc Primer coat & Two coats of oil painting of color as approved by consultants & making good the wall. 3.00 Providing 2 mm thick F.R.P. Gutter with necessary M.S. Supporting Brackets. 3.00 Providing & Supplying JCB Machine on rental basis in case of emergency situation and break down type work & also during unavoidable condition as per instruction of engg.incharge , rate includes all nece. shifting, fuel and operating charges and stacking of useful & non-useful materials separately up to store. (No payment should be allowed for non working condition of machinery and for pipe line excavation and laying work) 3.00 Providing & Fixing Door closer - complete of Approved make to wooden / Aluminium Doors as per direction of engg. In charge. 3.00 Providing and fixiing M.S. Fan clamps type 1 of 16 mm dia M.S. bar bent to shape with hooked ends of R.C.C. slabs during laying incl. painting the exposed protion of loops, all as per standard design complete. 3.00 Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat cement finishing, watering etc. complete. 3.00 Making connection of galvanised mild steel distribution branch with galvanised mild steel main 50 mm to 80 mm nominal bore by providing and fixing tee including cutting and threading the pipes complete. 3.00 Providing and Fixing 1 H.P. Electrical monoblock or submarcible water pumps withmotor and required cable and switch board of approved brand and make etc.comp.as directed. 3.00 Providing TMT Bar FE 415 reinforcement for R.C.C.work including bending, binding and placing in position complete upto floor two level 3.00 Providing TMT Bar FE 500D reinforcement for R.C.C.work including bending, binding and placing in position complete upto floor two level 5.00 Conveyance charge of Earth,Lime, Murrum, building rubbish earch manure or sludge and excavated rock and fly ash,aggregate of any kind etc.comp.upto 5 km lead.(L.S.) 3.00 Providing and laying polished granite stone slab 18 mm thick in risers of steps, dedo and pllars laid on 10 mm thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with gray cement slurry including rubbing & polishing etc.complete. 3.00 P/M/F chainlink jali 8x4 size as per details sketch & instructionof engineer in charge same as lal darwaja garden pattern consisting of 3dia. M.S black pipe A class 54 ht. fixed at 89 c/c in C.C 1:2:4 block of 9x9x9 size chain link jali of size 2x2x10 gauge fixed in 35x35x5 mm MS angle frame 8x4 size with MS flat of size 25x3 mm welded jali etc.comp.The jali is to be welded to MS pipe with MS flat as instruction given.The M.S pipe and the M.S angle frame are to be painted one coat of primer and two coats of paint as directed in line and level. 3.00 Providing and Laying of Rubber Moulded Paver Block Grey/Coloured 60 mm thick, M-35 Grade of any size shape (Usually Uni-Paver Blocks) using black trap good quality aggragate of 20 mm nominal size for footpath,parking areas, service lanes and other areas as mentioned in the drawing instruction of engineer in charge. Cost includes formworks using rubber mould, Rate providing and laying paver blocks per required grading and specification. The paver block shall be mechanically compacted. The work of paving blocks shall be executed in line and level by skill mason of flooring work only. It should be laid in such a way that the no cutting of the paver block to be necessary. if cutting of paver block necessary then should be cut by machine only and carting. The finished surface of the paver block shall have resonably good, plain finished. Paver blocks shall be compacted and shall be relaid if necessary. Gravel or such type of materials shall not be allowed for production. Laying on 5 cms thick sand 3.00 Labour work for fixing interlocking blocks / any kind pavement on up to 50 mm th sand bedding, levelling,watering and fixing in line & level as well cleaning the site etc.comp. as directed. 3.00 Box type metal letters forming composite box made from 1mm thick stainless steel plate of grade 304 having brush finish following font size to be fixed at Main Gate in english and Gujrati and including fixing charges approved before fixing by clent / consultant. 3.00 400mm high 3.00 300 mm high 3.00 230 mm high 3.00 Provdg. & laying S.W. Gully trap with brick masonry chamber & water tight G.T.Stone including fixing of covervSquare mouth trap 100 mm x100 mm size P-Trap 3.00 Providing and laying (to level or slopes) and jointing with stiff mixture of Cement Mortar in proportion 1:1 Salt glazed stoneware pipes including testing of pipes and joints complete.(A) 100mm dia. 3.00 Providing and laying (to level or slopes) and jointing with stiff mixture of Cement Mortar in proportion 1:1 Salt glazed stoneware pipes including testing of pipes and joints complete.(B) 150mm dia. 3.00 Constructing brick masonry chamber for underground C. Inspection chamber and bends with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.( Inside dimensions 455mmx 610mm and 450mm deep for single 3.00 Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i)Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with one or two inlets. 3.00 Providing, supplying and fixing precast C.C. blocks (M-20) edge kerb having size of 75 x 300 x 300 mm depth and as per design conveying it to the site, jointing into C:M 1:3 and racking out the joints incl. necessary excavation of asphalt, soil etc..completed. 3.00 Constructing a cooking Sandwich platform 60 cm. width and 70 cm high resting on B.B.Masonry walls 23 cm.thick in C.M.(1:6) with (ii) Fixing black Granitee 30mm thick laid on precast R.C.C. (1:2:4) slab with plastering on exposed faces of wall in C.M. (1:4) etc complete. 3.00 Providing and fixing PVC Printed pain colour false ceiling with grid type with alluminium frame consisting of 600mm x 600mm 3mm thick plain PVC sheet used as panel insert in a frame work made using anodized alluminium T section of size 1 x 1 (235 x 25mm, 19 gauge or 1 mm thick) in square pattern of grid sizes of 2 x 2 (600 x 600mm) The alluminium frame work is supported from the cceiling with the help of G.I. hook and G.I. wire/6mm M.S. rods of required sizes to maintain proper level etc. The aluminium frame work is supported on side wall with the use of alluminium L section of size 1 x1 (25 x 25mm) angles etc. complete as per direction of Engineer in charge. Manufactures specification and drawing. 0.00 Providing and supplying of labour for necessary manual excavation, cleaning, Shifting of Material Or any other, or for any other work as directed by Engineer In charge. The Rate includes Handcart with Mazdoor 3.00 Labour charges - Mazdoor (Female) 3.00 Labour charges - Mazdoor (Male) 3.00 Labour charges - Supervision for Machinery 3.00 Fitter/Plumber/Mason 3.00 WELDER/ Gas cutter at Day /night 3.00 Up to 0.30 meter (By any type of Breaker Machine or R.C.C.Cutter machine including cost of operator, fuel, & transportation etc complete. 3.00 0.30 meter & above (By any type of Breaker Machine or R.C.C.Cutter machine including cost of operator, fuel, & transportation etc complete. 3.00 CatchPit Jali Fixing P/F FRC catch pit jali with frame 600mm x 600mm clear opening etc. comp. As directed by engineer in charge. 0.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. Nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. 3.00 15 MM DIA 3.00 20 MM DIA 3.00 25 MM DIA 3.00 32 MM DIA 3.00 40 MM DIA 3.00 50 MM DIA 3.00 Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and painting with two coats of Anti-corrosive paint etc. complete. 3.00 Supplying and fixing C.I. cover 300mm x 300mm without frame for Gulley trap (Standard pattern) te weight of cover to be not less 4.53 Kg.) 3.00 Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2 working pressure polythene pipes of the following out side Dia. Low densidy, complete with special falnge compression type fittings, wall clips etc. including making good the wall ceiling and floor. 3.00 (F) 75mm 3.00 (G)110 mm 3.00 Providing and fixing sheet glass, selected quality (Type-C) bedded in putty and fixed with teakwood and necessary cutting of glass. (2) 6 mm thick. 3.00 Providing and fixing rough cast wired glass, 6mm thick bedded in putty and fixed with wooden beading including the cost of wooden beadings of Indian teak wood and necessary cutting of glass. (C) Wired - figured glass 0.00 Providing and supplying ISI Standard RCC pipes (of sulphate resisting Cement )in standard lengths of following class and diameter suitable for rubber ring joints (socket and spigot) including all taxes,insurance, transportation,treight charges,octroi,inspection charges, loading,unloading, conveyance to departmental stores, stacking etc. complete Class NP3 Test pressure 0.7 Kg/Sq.Cm 3.00 300 mm dia 3.00 450 mm dia 0.00 Lowering, laying and jointing R.C.C. pipes in C.M.1:1 1/2 of following diameters in proper position , grade and alignment at all level as directed by Engineer-in- charge including conveyance from stone to site of work, labour giving hydraulic testing as per ISI code. 3.00 300 mm dia 3.00 450 mm dia 0.00 Providing and supplying ISI marked only standard length Stonewate pipes in standard lengths of following class and diameter including all taxes,insurance, transportiton, fright charges, octroi,inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete 3.00 100 mm 3.00 150 mm 3.00 200 mm 3.00 230 mm 0.00 Lowering, laying and jointing stone ware pipes of following diameters with cement joints in C.M.1:1 proportion in proper position , grade and alignment at all level as directed by Engineer-in- charge including conveyance from stone to site of work,Jointing material etc.comp. 3.00 100 mm 3.00 150 mm 3.00 200 mm 3.00 230 mm 0.00 Constructing Chamber of following size including excavation, refilling, BBCC (1:5:10) for foundation, C.C.Channel (1:2:4), finished 15 mm thick cement plaster inside in CM 1:3, finishing with cement slurry, Brick masonary in CM 1:5 & excluding the cost of chamber seat cover etc..completed. 3.00 0.60 X 0.45 mt. size Inside Clear, Depth from 0.0 to 0.90meter for pipe dia <=150 mm. 3.00 0.60 X 0.75 mt. size Inside Clear, Depth from 0.0 to 0.90meter for pipe dia <=20 mm. 3.00 0.75 X 0.75 mt. size (Inside Clear) Depth from 0.0 to 1.20 meter for pipe dia <=20 mm - 29 - 0.00 Constructing Slab Type M.H. Chamber Of The Following Size Including Excavation, Refilling, Brick Bats Cement Concrete (1:5:10) of thickness 15 C.M., CC Channel (1:2:4) of thickness 10 C.M., finished 15 mm thick cement plaster inside & outside (Only for shaft) In Cm 1:3, Finishing With Cement Slurry, P/F 4 Mm Dia M.S.Steel Hdpe Coated Steps 35 Cm C/C At 35 Cm Staggered Masonary In Cm 1:5, Rcc Slab In Cc1:1.5:3 of thickness 15 C.M.,Including Cantering & Reinforcement (Single jalli at 15 C.M. c/c bothway 10 mm dia.)But Excluding The Cost Of Manhole Seat Cover Etc..Completed Of Size 0.75 X 1.00 Meter (Inside Clear, M.H. length should be parallel to the flow) 3.00 1.00 to 2.00 meter depth, (Slab at Ground level) (for pipe dia <=230 mm) 3.00 2.00 to 3.00 meter depth, (Slab at below 0.60 mt. From G.L.) (for pipe dia <=300 mm) 0.00 Making connection to the ex. M.H.in running sewer incl. Dewatering and other required machinery etc. of following dia pipes at any convenient time. All damaged work shall be well repaired as per instructions. etc..complete. 3.00 a. 150 mm to 300 mm dia. 3.00 b. 400 mm to 600 mm dia. 3.00 Cutting the pipes of following dia coming in the new M.H.in running sewer including cutting bars, including removing debris /silt from the M.H. and carting at a suitable distance etc..complete as directed. No payment for M.H. work will be made until pipe is not cut completely in all respect. 3.00 150 mm to 300 mm dia. 3.00 400 mm to 600 mm dia. 0.00 Repairing damaged M.H. and rasing M.H. up to road level incl. removing damaged brick work and repairing by brick masonry in C.M. 1:5 and plaster in C.M. 1:3 and fixing C.I. steps and existing MH sheet cover, removing the debris from MH and carting the same as directed. 3.00 (A) up to 0.15 mt. (@ Two Coarse) 3.00 (B) up to 0.35mt. (@ Four Coarse) 3.00 (C) up to 0.65 mt. (@ Seven Coarse) 3.00 (D) up to 0.90 mt. (@ Ten Coarse ) 3.00 Repairing damaged I.C./ Raising removing damaged brick work and repairing by brick masonry in C.M. 1:5 and plaster in C.M. 1:3 and fixing C.I. steps and existing chamber sheet cover, removing the debris from chamber and carting the same as directed. 0.00 RCC Precast M.H.Frame & Cover Manufacture , supply & Delivery at store or at side of work Precast RCC M200 Frame & Cover Suitable to drainage M.H. and as per type design & Drawing including cost of reinforcement M.S. Angles or Flat , cutting mold work etc. 3.00 Heavy Duty 3.00 Frame Suitable for 50 Cm opening of MH 3.00 Cover Suitable for 50Cm Opening Of MH 3.00 Light Duty 3.00 Frame Suitable for 50 Cm opening of MH 3.00 Cover Suitable for 50Cm Opening Of MH 3.00 House connection Chamber Light Duty 3.00 Frame 3.00 Cover 1000.00 Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws (A) Plain Grill. 3.00 Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws. (B) ORNAMENTAL GRILL 3.00 Lettering and lettering charges and printing Muni.corporation symbol with help or skilled artist including colour costst. 3.00 Prismatic grade reflective sheeting with super high performance durable ,micro prismatic material confirming to type XI as per ASTM-D 4956 -09 & Cutting , pesting letter according to IRC standard in dual language with micro prismatic material confirming to type XIsmatic confirming to type XI 2.00 Excavation of pit of manually necessary labour of size .6*.6*.6 m for as per above MS Structure foundation of pole for any size. The grade of concrete should be M-20 the item rate include carting, filling, with available earth and should be proper be level up to ngl,as directed by Engineer in charge 2.00 Extra for providing and mixing water proofing material in Cement concrete in mix proportion recommended by the manufacturers. 2.00 Non reflective solar contact film for fixing on glass. 2.00 Labour charges - Mazdoor (Male) 2.00 Labour charges - Handcart with Mazdoor 20.00 Providing and applying fibere reinforced cementitious micro concrete work in cellings and beams incl.mixture of CEMSCREED HM (F) fair mate company material, FBR bonding agent material with water in suItable proportion anti corrosive treatment on exposed beam,celling steel bars with safeCore R incl.all kind of labour etc.comp.including three coat of white wash. 95.00 ACP CLADDING - Providing and Fixing Alluminium Composite Panel of (approved make by Architect) 4mm thick exterior grade PVDF with coil thick of 0.25 mm & frame work made out from Alluminium anodised section of size 50 x 25 mm ( w app = 0.57 kg/m) having weight of 2.6 kg for 15 supported on Masonary/ RCC with the help of MS Bracket fixed with Brick Fastner/ Anchor Fastner and groove filled with 789 weather fillent bowl corning corporation make etc. complete as per Architect dwg. and as per instruction of E.I.C. 4.00 providing and supplying Task force and req.machinary for removing old board and refixing the same after welding and other req.repairing work are comp
