}

Tender For Supply Of Cast Basalt Specials For Maintenance Of Series I And Series - Ii Bottom Ash Pipe Lines From Plant Main Gate To Discharge Points In Ash Pond, nellore-Andhra Pradesh

Andhra Pradesh Power Generation Corporation Limited has published Tender For Supply Of Cast Basalt Specials For Maintenance Of Series I And Series - Ii Bottom Ash Pipe Lines From Plant Main Gate To Discharge Points In Ash Pond. Submission Date for this Tender is 02-05-2025. Pipe Laying Tenders in nellore Andhra Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

48674437
Tender For Supply Of Cast Basalt Specials For Maintenance Of Series I And Series - Ii Bottom Ash Pipe Lines From Plant Main Gate To Discharge Points In Ash Pond
Open Tender
NCB
Andhra Pradesh
Nellore
02-05-2025

Tender Documents

Tender Details

Supply Of Cast Basalt Specials For Maintenance Of Series I And Series - Ii Bottom Ash Pipe Lines From Plant Main Gate To Discharge Points In Ash Pond , Ms Sleeve Align Ring(385 Idx120x12mm) Ms Sleeve Coupling Aligning Ring With Id 385 Mm/Od 409 Mm, Width 120 Mm And 12 Mm Thickness , The Material Shall Confirm The Standartds As Per Is 2062/E250, Sleeve Coupling Shall Conform To Awwa C219-11 And Approved Drawing And Epoxy Based Zinc Phosphate Primer Enamel With High Build Epoxy Enamel (Two Component) Glossy Finish, Including Supply Of Sleeve Bolt Of M-8 Size With Washer. Sleeve Shall Be Painted Outside With Three Coats Of Paint Ie., Epoxy Primer , Mio Intermediate Coat And High Build Epoxy Finish Coat (As Per Drawing Enclosed).,Deep Galvanized Ms Stud(M-20 X 230Mm Lng X 4.6 Gr) Confirming To Is 1364(Part1) :2023 And Zinc Flake Coating Of Flznl/Nc/960H Of Iso 10683 : 2018. (As Per Drawing Enclosed).,Gasket Material:Neoprene Rubber Additional Information:For Sleeve Coupling 350 Nb Ci Pipe (As Per Drawing Enclosed)And Rubber Gasket Shall Conform To Clause 4.2.3 Of Awwa C219-11.,Gasket: Neoprene Rubber Of Thick 3Mm For Flange Neoprene Rubber Gasket Of Thickness 3Mm For Flange Having 12 Nos Of 28.4Mm Dia Holes Conforming To Is 638:1979, Type A And Grade1 (As Per Enclosed Drawing),Fastner,M.S.Deep Galvanized M 24X140 Mfastner,M.S.Deep Galvanized M 24X140 Mm Long With Nut And Washer Comply With Is:1367 Class 4.6. Galvanized Hex Bolts M-24 X 140Mm Long X 4.6 Gr- Is 1364(Part1) :2023 With Zinc Flake Coating Of Flznl/Nc/960H Of Iso 10683 : 2018 + 2 Nos Nuts Is 1364-2018 (Part3) + Galvanised Punched Washers - Is 2016- 1967 A26.,Galvanized Hex Bolts M-16 X 200Mm Long X Full Thread 4.6 Gr- Is 1364(Part2) :2023 With Zinc Flake Coating Of Flznl/Nc/960H Of Iso 10683 : 2018 + 2 Nos Galvanized Nuts Is 1364 (Part3), Galvanized + 2 Nos Galvanised Punched Washers - Is 2016-1967- A26.

Key Value

Document Fees
Refer document
EMD
INR 6813.0 /-
Tender Value
Refer document

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail