|
| 1 | 12.157.1.2//Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessaryfilling up the gaps at junctions, i.e. at top, bottom and sides with requiredEPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically wherever required includingcleat angle, Aluminium snap beading for glazing / panelling, C.P. brass /stainless steel screws, all complete as per architectural drawings and thedirections of Engineer-in-charge. (Glazing, panelling and dash fasteners tobe paid for separately) : 1.2. For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 2 | 12.159.2//Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 2. With float glass panes of 5 mm thickness (Weight not less than 12.50 Kg/sqm) |
| 3 | 12.88// Providing and fixing aluminium die cast body tubular type universal hydraulic eachdoor closer (having brand logo with ISi, IS : 356 4, embossed on the body, door weight up to 35 kg and door width up to 7 00 mm), with necessary accessories and screws etc. complete. |
| 4 | 23.22.8.4//MCCB, DISTRIBUTION BOARDS, MCB\"s, RCCB\"s,CHANGE OVER etc. 8.4, SITC Four pole on LOAD manual change over switch in SS enclosure of following Rating 300 amp 415 Volts |
| 5 | 20.68.1//Providing, lowering, laying in trenches, aligning, fixing in position andjointing at all level/depths Ductile Iron (DI) standard specials plain /flanged/socketed confirming to IS9523-2000 with rubber ring (EPDM/SBR) jointssuch as tees, bends, tapers, caps etc. with in trenches in DI pipe linecomplete including all material, labour, testing and commissioning alongwith pipe line as per Technical Specifications and as per direction ofEngineer.1 Up to 300mm dia |
| 6 | NS item// Analysis of Rates for providing and fixing of 60-watt LED street light with 50 mm dia. MS Bend Pipe, 1.5 sqmm copper cable including cost of labour for fixing of bend pipe, streetlight etc. complete in all respect to the entire satisfaction of Engineer-in-Charge |
| 7 | NS item// Analysis of Rates for providing and fixing of 2 Nos. 12 Volt tubular batteries (ISOAH) for inverter including cost of loading-unloading, carriage etc. complete in all respect to the entire 1ati1faction of Engineer-in-charge. |
