|
| 1 | Carriage offollowing Materialfrom store center or from any other place to the respective site of work Distence up to 75 km through the Kachha Pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, T & P and carrier etc. required for proper completion of work. |
| 2 | ST Pole SP55 11M Long |
| 3 | P.C.C. Pole 8.5 Mtrs. |
| 4 | ABC Cable (3x95+1x70+1x16sq.mm) |
| 5 | ABC Cable (3x120+1x95+1x16sq.mm) |
| 6 | 25/63/100 KVA D.T, (New) |
| 7 | 250 KVA D.T. (New) |
| 8 | A.C.S.R. Weasel conductor |
| 9 | A.C.S.R. Dog conductor |
| 10 | 11 kv Outgoing VCB |
| 11 | Different Line Material ( Conductor, X-Arm,Channel, Insulator , G.I. Wire , Stay wire & Rod, Earth Rod , DB BOX etc.) |
| 12 | Supply and Errectionof Following Electric Material(As Per Norms of UPPCL/DVVNL):- |
| 13 | Stone Pad (300*300*75sqm) |
| 14 | X-arm Holding Clamp for P.C.C. Pole |
| 15 | Stay Insulator |
| 16 | T-off Channel clamp with N & B |
| 17 | Earth wire Clamp with N & B |
| 18 | D.P. Clamp with N & B |
| 19 | Stay Clamp with N & B |
| 20 | Danger Board with Clamp and N&B |
| 21 | 11 kv. F-Clamp with N & B |
| 22 | Grouting of Pole |
| 23 | Grouting of Stay |
| 24 | All. Lug 630/400/240/120/70 Sqmm. |
| 25 | Chemical Earthing |
| 26 | Tailless Unit 500 A |
| 27 | Number Plate with Clamp and N&B |
| 28 | L-Type Copper Clamp with N&B |
| 29 | Tailless Unit Stand |
| 30 | Eye Hook Clamp with N&B |
| 31 | Suspension Clamp with N&B |
| 32 | Dead End Clamp with N&B |
| 33 | PRC. Connector |
| 34 | Distribution Box Clamp with N&B |
| 35 | L-Type Copper Strip 600/400/250 KVA T/F |
| 36 | G.I. Pipe 150 mm. Dia |
| 37 | Plinth for 250 KVA DT |
| 38 | Fencing for 250 KVA DT with One No. Gate and with the help of MS Angle and MS Mesh, Size 3mx3mx3m. |
| 39 | Deep Bore Earthing for T/F Neutral |
| 40 | Guarding Angle Clamp with N&B |
| 41 | Erection of Following Materialincluding the work of complete H.T. fittings as per RESPO manual and as per direction of engineer Incharge including the cost of labour, T & P and carrier etc. required for proper completion of work. (With proper Earthing.) |
| 42 | Single Pole Structure of 11 Mtr ST Pole |
| 43 | Single Pole Structure of 8.5 Mtr PCC |
| 44 | Double Pole Structure of 8.5 Mtr PCC |
| 45 | Stay Set |
| 46 | Stringing of LT ABC ( Different size) as per RESPO Norms. |
| 47 | Laying, Sagging, Stringing, Binding and Jumpering etc. of Weasal/Racoon /DOG conductor on the newly erected pole/ old poleas per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T & P, carries etc. required for proper completion of work. |
| 48 | Muffing of S.T.P. as per RESPO Norms ( Require Material will be provided by Contractor ) |
| 49 | Painting of S.T..P. ( Red Oxide and All. Paint will be provided by contractor ) |
| 50 | Guarding between two poles like single / double / Tri / Four Poles etc. to guard LT / 11 Kv / 33 KVLine, Road / River crossing ect. With G.I. wire 6 SWG and G.I. wire 8 SWGincluding fixing of guarding channel with clamp and Nut & Bolts etc. As per relevent drawing . |
| 51 | Dismantling of existing 33KV/11 KV / L.T. line and removal of all accessories & fittings from poles, re-rolling of conductor and proper stacking and Cartage of dismantled conductor & accessories from site of work to DVVNL, Store. |
| 52 | Back Cartage of DT from work site to store as per direction of JE Incharge. |
