}

Tender For Construction Work Of 5 Nos New Water Stand Post And Submersible At New Mandi Site Sambhal - Excavation In Foundation In Ordinry Soil (Loam Clay Or Sand) Including Lift Upto 1.50 Meter And Lead Upto 30 M All Completion Of The Work (Sl No.251) , sambhal-Uttar Pradesh

Rajya Krishi Utpadan Mandi Parishad has published Tender For Construction Work Of 5 Nos New Water Stand Post And Submersible At New Mandi Site Sambhal - Excavation In Foundation In Ordinry Soil (Loam Clay Or Sand) Including Lift Upto 1.50 Meter And Lead Upto 30 M All Completion Of The Work (Sl No.251) . Submission Date for this Tender is 05-05-2025. Excavation Work Tenders in sambhal Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

48661486
Tender For Construction Work Of 5 Nos New Water Stand Post And Submersible At New Mandi Site Sambhal - Excavation In Foundation In Ordinry Soil (Loam Clay Or Sand) Including Lift Upto 1.50 Meter And Lead Upto 30 M All Completion Of The Work (Sl No.251)
Open Tender
NCB
Uttar Pradesh
Sambhal
05-05-2025

Tender Documents

Tender Details

Tender For Construction work of 5 nos new water stand post and submersible at new Mandi site Sambhal - Excavation in foundation in ordinry soil (Loam Clay or sand) including lift upto 1.50 meter and lead upto 30 m all completion of the work (Sl No.251) 2 Concrete with the 4.00 cm gauge brick ballast fine sand of 1.25 finess modulus and cement in the proporation 12:6:1 in foundation and under floor including supply and material all completion of the work (SI No.273) 3 M- 150 brick work in 1:4 cement and approved Coarse Sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. Required for the proper completion of the work. (SI. No. 307A) 4 Earth filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 Kms. From the site of work and including watering, dressing etc. Rate to include cost of all material labour T&P etc. required for proper completion of work. (Rate of Analysis) 5 12 mm thick plaster with cement and and approved coarse sand in 1:4 over brick work minimum thickness not be less than 10m all completion of the work (SI No.584) 6 R.C.C work with cement approved coarse sand and 2cm. Gauge approved stone grit in proportion of 1:1.5:3 (1 cement :1.5 coarse sand (FM2.20-3.60) 3stone aggregate20mm) in RCC Plinth bandexcluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all meterials, labour and T&P etc. required for proper completion of work. Binding wire of supplied by the contractor free of cost. SI No.283 7 12 mm thick plaster with cement and and approved coarse sand in 1:3 over brick work minimum thickness not be less than 10m all completion of the work (SI No.) 8 R.C.C work with cement approved coarse sand and 2cm. Gauge approved stone grit in proportion of 1:1.5:3 (1 cement :1.5 coarse sand (FM2.20-3.60) 3stone aggregate20mm) in RCC Slab excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all meterials, labour and T&P etc. required for proper completion of work. Binding wire of supplied by the contractor free of cost. SI No.283 9 M.S. (Tor steel or plain) in plain work such as R.C.C. or R.B. work in bending for proper shape and including supply of steel and including supply of steel and its wastage, authorized overlapping shall be measured (S.I. 504) 10 Supply and fixing of 6mm thick china white Glazed tiles in dedo or skirting laid with 1:3 cement and course sand mortar finised with white cement slurry jointing and polishing complete as per SI No.628 11 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorptions less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement 4 coarse sand) including grouting the joints with white cement and matching plgments etc, complete size of Tiles 60x60 cm.Chp. No.14 New item No.4 Page No.29 DSR 2021 12 Providing wall putty on new surface with approved quality of materials i/c all completed SI No. Chapter No.15 New Item 11 13 Chequerred Precast cement concrete Tiles 22mm thick in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 22mm thick bed of cement mortar 1:4 (1cement: 4 coursesand) DSR Vol-01 item 11:20:1 14 Cement concrete flooring in 1:2:4 cement : 2 coarse sand (F.M.2.20-3.60): 4 graded stone aggregate 20mm nominal sizelaid laid in panels finishing with 3mm floating coat of neat cement or cement and marble dust in 5:1 as specified over & for 25 mm thick. 15 Finishing wall with over a priming coat of water superior quality water proof cement weatherpaint/coat of appd. Make and quality on new work with three coats to give an even shade i/c preparing surface by thoroughly cleaning and sand papering and supply of all material labour T&P etc reqd. for proper completion of the work. Chapter No. 15 NewStorm No. (9+10) 16 Providing concealed UPVC pipe 20mm dia complete with PVC fiting including cuting and making good the walls as per DSR /18/8.2 17 Supply and fixing of 10 cm internal dia P.V.C. down pipe everest or charminar make or any standard company complete with bands with door at top and plain at bottom and granting and including supply of necessary M.S. clampls 2.5 cm x 3 mm dia nuts and bolts including washers of required size, all materials, labour and T&P etc. required for proper completion of the work and also including reqair of plaster, pointing etc. if damaged during fixing of the pipe.As per item No.730 above but Pipe, 6 kg/per sq.cm. pressure 10cm Dia (interned) 18 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore. 19 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved quality conforming to IS 8931 15 mm nominal bore 20 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked with cover and suitable locking arrangement and making necessary holes for intet, outlet and overflow pipes but without fittings and the base support for tank. 21 Supply and fixing boring and loring for submersible and including machne of submersible. 22 Junior Engineer

Key Value

Document Fees
INR 1850 /-
EMD
INR 110000.0 /-
Tender Value
INR 11 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail