Construction Of Chattri And Lighting Works At Dm Residence- 1 Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level. In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m 2 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:4:8 (1 cement : 4 fine/ coarse sand : 8 graded stone aggregate 40 mm nominal size) 3 Random rubble masonry with hard stone in foundation and plinth Cement mortar 1:6 (1 cement : 6 coarse sand) 4 Centring and shuttering with plywood or steel sheet upto two stories ( each story of height upto 3.5 metre from floor level) including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers 5 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement: M-20 Grade Concrete (1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) -As per design mix) 6 Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. Kg 7 Earth filling with available surplus soil excavated from foundations and taken only from outside of building plinth in layers not exceeding 20cm in depth, consolidating each deposited layer including ramming and watering and consolidation with lead up to 50 m and lift upto 1.5 m. 8 Half brick masonry with FPS bricks of class designation 75 in superstructure above plinth level upto two stories. Cement mortar 1 : 4 (1 cement : 4 coarse sand) 9 Pointing on stone work with cement mortar 1:3 (1 cement : 3fine sand) :Flush/ Ruled pointing 10 Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20mm cement plaster of mix :1:4 (1 cement : 4 fine/ coarse sand) 11 Fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:4 ( 1cement : 4 coarse sand) with joints finished flush. Red Sand stone size not less than 1350 Cm2, a) 40mm 12 Supplying and fixing Jaisalmer stone Dassa (sills) fine dressed upto 15 cm. Thickness including panny type ornamental work. 13 Supplying and fixing Jaisalmer stone pillars (Surahidar) with flute fullydressed and carved with ornamental workcomplte. When fully exposed. 14 Supplying and fixing ashlar stone arches fuly fine (3 lines) dressed for 1.5 to 5m. Span (Net content payable) (a) Soorsagar or eqvt. White Ashlarfor Tibaries. Fully Flowered leaves 15 Supplying and fixing ashlar face stone 10 cm thick fine (3 lines) dressed (A) White ashlar 16 Supplying and fixing ashlar coping ordinary 7 to 10 cm. thick 2-line dressed (normal length of single piece not less than 0.90m) (a) Soorsagar or eqvt. White Ashlar 17 Supplying and fixing ashlar coping moulded and counter slopped 7 to 10 cm. thick (2 line dressed) (normal length of single piece not less than 0.90m) (a) Soorsagar or eqvt. White Ashlar 18 Providing & Installation of White ashlar stone Carved perforated Jali 50 to 70mm thick with height 600mm and length not exceeding 1250mm with pillar 900mm long with groove cutting etc. complete as per direction of Engineer-incharge (excluding cost of providing & fixing dassa). 19 Labour charges for Animar dressing (old M.G.H. pattern) over Jodhpuror equivalent white Ashlar over already two line dressed surface by using special tools i.e. toothed chisel etc. (For Jaisalmer stone ornamental chair having ornamental cut stone work flower and leaves and bell and butas on three side of seat (over patti muya) both hathas and back portion of chair fine dressed i/c pointing with cement stone dust mortar 1:2 complet in all respect.) 20 Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :Flush/ Ruled pointing with pigments of matching shade 21 S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. 50 mm 22 S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 8 SWG copper Wire 23 Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Unarmoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Classbricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. 6.0 Sq.mm 4 core 24 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 2 x 2.5 sq.mm 25 P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required. 6 A to 32 A rating 26 P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including makingconnections with lugs , testing etc. as required. Triple pole Isolator 63 A rating 27 P&F TP&N 415 V side handle operated double break fuse switch unit in sheet steel enclosure conforming to IS: 13947 P-III and IS:4064 (W/o HBC fuses) including making connections with suitable lugs, testing etc. as required.63 A rating 28 Supply and erection of Decorative Cast Iron pole as per approved design of following length with base plate on the cement concrete foundation of M-15 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS 1367 P III). The pole shall be made of Cast Iron as per IS 210:1993, precision machining and filling job to achieve good finish and a fine coat of primer on each element before assembling. After assembling of each element one coat of primer and two coats of P.U. paint are applied. Approved coloured UV resist coating of mat/ glossy/ metallic finish followed after air drying of pole. The pole shall have a weatherproof flush door and locking arrangements, two/ one arm bracket of length of 430/380mm complete in all respect. 3.0 Mtr. 29 P&I of IP65 protected Top/Bottom mounted LED Post top Light system. Fixture made of powder coated die cast alluminium housing with UV stabalized PC diffuser. The System level Luminous efficacy >90 Lumen/W. SMD LEDs , System CRI>70, CCT: 3000/4000/6500 K. The integral SMPS based electronic driver must be constant current and surge protection of min. 4KV(L-N) and efficiency > 85%, PF>0.9, THD<20% and input Voltage range of 90-270V AC at 50Hz. System life of 50000 burning hours with 70% of Initial Lumens maintained. Light output in Cool white or Warm White Colour as per engineers choice. Fixture must be in compliance with IS/CE Standards. External Surge Protection Device(SPD) to be connected saparatelyMinimum lumen output 4500 lm Post top Luminarie 30 Crazy marble stone flooring including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume) and under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) rubbing, polishing and cement slurry etc. complete : 18 mm thick crazy marble stone white, black or as specified.
