Tender for providing rates for the supply & installation of modular lab furniture & other items of godrej or equivalent make for newly constructed research complex at uas, raichur campus on turnkey basis as per requirement-reg- Executive Table Main Table + ERU LH 1800 x 2100 x740 MAIN worktop:Made of 43mm Thick (1) combination of MDF and particle board with top veneer face coated with clear lacquer. All edges are edge banded with matching 1mm thick veneerlipping. LEATHER PAD: Made of 18mm Thick (+1) MDF with Leatherette wrapped around top surface. This leather pad is fixed to main top panel. DRAWER UNIT: Top panel and drawer unit modesty panel is made of 43mm Thick (1) combination of MDF and particle board with top veneer face coated with clear lacquer. All thickness edges are edge banded with matching lipping. Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thickPVC lipping. Bottom panel of drawer is 9mm thick particle board with leatherette on topsurface. Drawer unit is provided with soft closing channels for smooth opening and closing. Drawer unit is secured with side central lock. MODESTY:Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approvedshade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVClipping. Modesty is fitted with aluminum trims. ERU WORKTOP: Made of 43mm Thick (+1) combination of MDF and particle board with top veneer facecoated with clear lacquer. All thickness edges are edge banded with matching lipping. UNDERSTRUCTURE AND ERU HINGE DOOR UNIT: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Door is fixed with soft closing hinges and handle is provided for ease of opening.ERU is secured with side central lock.. ACCESS FLAP WITH POWER BOX: Soft closing access flap with power box contains 3 Universal Sockets, 2 USB power points, 1 HDMI connection, 1 inbuilt misc. cable grommet and CAT 3 and CAT 6connections. Back Unit Body 2400 x 470 x 1226 CONSTRUCTION AND MATERIAL:Made from combination of side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Backpanel(0.5mm CRCA), Top Bottom stiffener (1.2mm CRCA) and End Cover(0.6mm CRCA). Shelves are 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513). Storage body is powder coated with Epoxy Polyester to the thickness of 50 miruna+/-10 micron). VENEER DOOR:Made of 12mm Thick (1) MD with 3.5mm veneer both side and face coated with clearlacquer. All edges are edge banded with matching Imm thick veneer lipping. Door isprovided with soft closing hinge. Handle is also provided for sane of opening. Storage issecured with 3 way cam lock. GLASS DOOR Made from the combination of aluminium allay (63400) extrusion and 4mm cleartoughened glass. Aluminium extrusion of glass dours are powder coated with Epoxy Polyester to the thickness of 50 microns [+/-10 micros). Handle is provided for ease ofirpening, RH Glass Door is provided with 3 way cum lock for security. Scientist Room workstations-1500 x 1800 Providing and placing WISH panel a tile based modular workstation, with partition thickness as 52.4 mm thk and ht 1200mm including powder coated aluminsam trama. Tles on main spine: Combination of tup tiles are fabric tackable/white board Battron tiles-Plain metal. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in Fabric finah. Wise Management-Wires shall be taken into the system through cable ducts from the junction boses and it is carried upto the panels throsagh concealed conduits inside the blocks. MODESTY PANELS WITH ASSEMBLY LEG-25 MM THK PLB modesty has been given on the front of the main worktop which is attached to the partition on one end with gable end beta and on the other end with metal powder coated frontier leg legs-metal powder coated legs at the end and shared condition. System shall alan have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface Main tahle recta out of 25 mm thkprelam particle bourd with lat pve lipping edge banding of size 1500 mm x 600 mm d and ERU table recta of size 1200 mm x 450 mm d. Pedestal- Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr bow ifile. CPU trolley with castora KBPT with mouselray-metal Note: All partitions and side panela have levelling screws for adjustment in case of Uneven floce to take care of +/- 40 mm of uneven flooring Executive Chair Providing, mapplying and placing of Mid Back Chair SEAT/BACK ASSEMBLY: The Cushioned seat assembly consshould be is of seat outer material-30% Glass Fiber Nylonja upholstered Seat inner (material Poly Propylene) with moulded Polyurethane foam &polyster fabric. The Net Back should be made up of Back outer (material-Glass Fiber Filled Nylon)& Back inner (material- PP and upholstered using Polyester Mesh fabric with high tenacity yarn Pull Back Star: 46.5 cm. (W) x 60.0 m. (1) Seat Size: 51.0 cm. (W) x 49.0 cm. (D HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam should be moulded with density 45+/-2 kg/m² and Haniness sad 12+/-2 kgf for 25% compressico. BACK SPINE The support spine should be made up of High Pressure. Die cast polished hedAluminsam. ARMRESTS The armrest should be having two adjustment. Height (6.040.5cm) and Depth 16.0±0.5cm). Height adjustment should be provided In Aluminsam structure of armrest which should be connected in Aluminum Back spine and should be operated by button. The depth adjustment should be provided in pad which should be fixed to armrest structure. Armrest Top should be made up of PU molded over plastic inner ACTIVE BIO-SYNCHRO mechanisan: The adjustable tilting mechaniam abould be designed with the following Features: 300 revolving type Front-pivet for tit with feet reating on ground & continuous lamber support ensuring more comfort Tih tension adjustment can be operated in stating position 5 position Tih limiter giving option of variable tilt angle to the thalt Sent/back tilting ratio of 1: The mechanism housing should be made up of HPDC Aluminum black powder coated (DPT 40 to 60 micron; SEAT DEPTH ADJUSTMENT: Bent depth adjustment should be integrated in the seat through a sliding mechanism. Beat depth adjustment sange should be of 3.75±0.1 cm LUMBAR SUPPORT ASSEMBLY: The Lumbar support assembly should consist of lumbar spine (material-Olass Fiber Filled Nylon) which should be fixed to Aluminum Back spine. The Lumbar pad (material Poly Propylene) should be fixed to fumbar spine through lumbar Pad wupport. Lumbar Support Assembly has height adjustment of 5.0.0.5cm PRIBUMATIC HEIGHT ADJUSTMENT: The poeumatic height adjustment has an adjustment stroke of 10.00.3m PEDESTAL ASSEMBLY WITH CASTORS The pedestal should be High Prensure Din cast polished Aluminum and fitted with 5 nos, twin wheel comars. The pedestal should be 65.0 0.5cm. pitch-center dia 175.0 1.0cm. With onatorn) TWIN WHEEL CASTORS: The twin wheel castore should be injection moulded in black PP having 6.0+ 0.1cm wheel Diameter. Overall Dimensions of Chair Seat Height-min 45.5 to max 55.5cm. Height-min 95.5 to max 105.5 cm. Width & Depth of Chair as measured from pedestal Width-75.0 cm and Depth-75.0 cm This product should be certified by Indoor Advantage GOLD, GREENGUARD GOLD, GRIHA & SVAGRIHA, BIPMA Level 2 & GREEN PRO Officer Chair Providing, supplying and placing of High Back Chair SEAT ASSEMBLY: The seat is made up of 1.510.1 cm thick bot-pressed plywood upholstered with. fabric and moulded polyurethane foam. SEAT SIZE: 51.8cm (W) x 49.7cm (D) BACK ASSEMBLY: The Back is injection moulded in glass and Polypropylene which ia 2 upholstered with Mesh fabric. The back consist of adjustable Lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 10.1 cm. BACK SIZE: 47.9cm(W)x66.9 cm (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane anat foam is moulded with demity 45+/-2 kg/m and haniness 14 12 kgf an per 18:7888 for 25% compression. ARMRESTS JADJUSTABLE) The height adjustable armrest is made of Polypropylene and can be adjusted to 6.010.1cm height it also has swivel and To and Pro adjustment with moulded PU armtop ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features 360° revolving type Front-pivot for tilt with feet resting on ground & cantinanus lamber support ensuring more comfkrt Till tension adjustment can be operated in seating position 5 position Tilt limiter giving option of variahle sit angle to the chair Seat/back tilting ratio of 1:2 The mechanism housing is made up of HPDC Aluminium & black poenter coated (DFT 40 to 60 micron) HEADREST The Headrest sub assembly is made up of injection moulded glass filled Polypropylene which is upholstered with moulded HR polyurethane Joam and fabric has an adjustment of 3.00.1cm & it is assembled over GRISTA 20F The complete headrest assembly is retro fic to the main chair PNEUMATIC HEIGHT ADJUSTMENT: The poetumatic height acdjustment with an adjustment strake of 10.010.3cm. PEDESTAL ASSEMBLY: The pedestal is injection moulded in black 30% glase-filled Nylon and fitted with 5 nos twin wheel castors. The pedestal pitch-centerdia is 166. L±0.5 cm.176.1 ± 1.0 cm, with castors. TWIN WHEEL CASTORS: The twin wheel castors are Injection motskled in hinck Polyamide having 6.01 0.1cm wheel Diameter. WIDTH (W)-76.0cm DEPTH (D) 76.0cm HEIGHT (H) 114.0 cm-123.5cm SEAT HECHT-43.5-54.Dom This product should be certified by Indoor Advantage gold, greenguard gold, hifmus level 2 Agrempro Visitor Chair Providing, supplying and placing of Visitor Chair. SEAT ASSEMBLY The seat assembly should be made up of 1.2 ±0.1cm thick hot-pressed plywood upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47.0 cm (W) x 48.0 cm. (D) BACK ASSEMBLY: The back asembly, should be made of powder coated (OFT 40-60 micronsi tubular frame of 02.54 0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube-designed with contoured lumbar support for extra comfort. hack should be upholstered using double layer spacer mesh fabric with high tenacity sarn. BACK SIZE 46.5 cm. (W) x 60.5cm (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam shurtuld he moulded with density 45+/-2 kg/m3 and hartinens load 16 ±2 kag for 25% compression. ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. TUBULAR PRAME The powder coated (D 40-60 microns) tubular frame should be cantilever type made of 02.54 ±0.03m x 0.2 ±0.0156cm thick M.S.ER.W. Tube Overall Dimamainne of Chair Seat Height-46.5cm. Height 93.5cm. Width & Depth of Chair as measured frum pedestal Width-61.0 cm and Depth-64.5 cm. SCIENTEST ROOM 2 Executive table Main Table BRU LH *1600 x 2300 x740 MAIN WORKTOP Made of 43mm Thick (13) combination of MDF and particle board with top veneer facecpated with clear lacquer. All edges are edge banded with matching 1mm thick veneerlipping LEATHER PAD: Made of 18mm Thick (1) MDF with Leatherette wrapped around top surface. Thisleather pad is fixed to main top panel. DRAWER UNIT Top panel and drawer unst modesty panel is made of 43mm Thick (1) combination MDF and particle beard with top verseer face coated with clear lacquer. All thicknessedges are edge banded with matching lipping Remaining construction is of 18mm Pre-laminated twin board (PLT) of EL-P2 grade andapproved shade confirming to 15-12823 1990, Edge banded with matching 2 mm thicdePVC lipping. Bottom panel of drawer in 9mmm thick particle board with leatherette on topsurfans. Drawer unit is provided with son closing channels for smooth opening and closing. Druwer unit is ancured with side central lnck MODESTY Made of 18mm Thick Pre-laminated twin heard (PLT) of EL-PQ grade and approvedshade confirming to 13-12823 1990, Edge banded with matching 2 mm thick PVClipping Modesty is fitted with aluminum trima. BRU WORKTOP Made of 43mm Thick jål) combination of MDF and particle board with top veneer lacncoated with clear lacquer. All thickiness edges an edge handed with matching lipping. UNDERSTRUCTURE AND ERU HINGE DOOR UNIT Made of 18mum Thick Pre laminated twin board (PLT) of E1-P2 grade and approvedshade confirining to 18-12823:1990, Edge banded with matching 2 mm thick PVClipping Door is fixed with soft closing hinges and hardle is provided for ease of opening, ERU is secured with side central locke ACCESS FLAP WITH POWER BOX:Soft closing access flap with power box contains 3 Universal Bockets, 2 USB powerpointa, 1 HDMI connection, 1 inbuilt miac cable grommet and CAT 3 and CAT 6connections Back Unit 2400 x 470 1226 CONSTRUCTION AND MATERIAL Made from combination of side panel 5mm CRCA), Bottom panel 5mm CRCAL Backpanel. Sem CRCA), Tup Bottom stiffener(1.2mm CRCA) and End Cover10.6mm CRCA) Shelves are 12 bend panel made of 0.7mm Thick CIRCA (D Grade, 18-513) Storage body in powder coated with Epoxy Polyester to the thickness of 50 microna)+/-10 micron) VENEER DOOR:Made of 12mm Thick (1) MDF with. 3-5mm veneer both side and face coated with clearlacquer. All edges are edge banded with marching Imm thick veneer hipping. Door isprovided with salt closing hinge. Handle is alan provided for ease of opening. Storage isscared with 3 way cam luck GLASS DOOR Madu from the combination of ahaminium alloy (53400) extrusion and 4mm cleartoughened glass. Aluminium extrusion of glass doors are powder couted with Epoxy Polyester to the thickness of 50 microns (+/-10 micronj Handle in provided for ease ofopening RH Glass Door is provided with 3 way cam lock for security Scientist room cubicle workstations 1500 1800 Providing and placing WISH panel & tile based modular workstation, with partition thickness a 52.4 mm the and ht 1200mm including powder coated aluminium trims. Tiles un main spine: Combination of top ties are fabric tackable/white board. Bottom tiles Plain metal INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in Fabric firah. Wire Management-Wires shall be taken into the ayatem through cable ducts from the junction boxes and it is carried ugm the pancls through concealed conduits inside the blocks. MODESTY PANELS WITH ASSEMBLY LEG 25 MM THK PLB modesty has been given on the front of the main working which is attached to the partition un ane end with gable end bits and on the other end with metal powder coated frontier leg. legs-metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worlisurface Main talile recta out of 25 mm thkprelam particle hound with flat pvc lipping edge banding of size 1500 mm w x 600 mm d and ERU talle recta of size 1200 mm wx450 mm it. Pedratal- Nova pedestal, flat metal front, full ht free standing central locking of size 390 mm w x 435 mm x 646 mm ht 3dr 2box+file CPU trolley with castora KBIT with mousetray-metal Note: All partitione and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/-40 mm of uneven flooring Executive Chair Providing, supplying and placing of Mid Back Chair, SEAT/BACK ASSEMBLY. The Cushioned seat assembly consshould be ts of seat outer (material-30% Glass Fiber Nylonja upholstered Seat inner material Poly Propylene) with moulded Polyurethane foam dipolyster fabric. The Net Back should be made up of Back outer (material-Glass Fiber Filled Nylon Back inner (material PP and uphodatured using Polyester Mesh fabric with high tenacity yurn Full Back Size: 46.5 m. (W) x 60.0 cm. (H) Beat Size: 51.0 cm. (W) x 49.0(D HIGH RESILIENCE (HK) POLYURETHANE FOAM: The HR Polyurethane foam should be moulded with density 45+/-2 kg/m and Hardness load 12+/-2 kg for 25% compression. BACK SPINE: The support spine should be made up of High Pressure Die casi polished hedAluminum ARMRESTS The armrest should be hasing two adjustment, Height 16.0±0.5cm) and Depth 16.040.5cm). Height adjustment should be provided in Aluminum atracture of armrest which should be connected to Aluminum Back spine and should be operated by button. The depth adjustment should be provided in pad which should be foved to armrest structure. Armrest Top should be made up of PU molded over plastic inner ACTIVE BIO-SYNCHRO mechanism The adjustable tilting mechaniam should be designed with the following features: 360° revulsing type Front-povot for tilt with feet resting on ground & continuous lumber support ensuring more sambari Tilt tension adjustment can he operated in seating position 5 position Tilt limiter giving uption of variable tilt angle in the chair Seat/buck tting ratio of 1:2 The mechanism housing should be made up of HPDC Aluminumă black powder coated (DFT 40 to 60 micrm SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in the seat through a slating mechaniam. Seat depth adjustment, range should beuf 3.750.1 cm LUMBAR BUPPORT ASSEMBLY The Lumbar support assembly should consun of lumbar spine (material-Glass Fiber Filled Nylon which should be fled to Aluminum Back spine. The Lumbar pad (material Poly Propylene) should be foed to lumbar spine through lumbar Pad support. Lumbar Support Assembly has beight adjustment of 5.040.5cm PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0±0.3cm. PEDESTAL ASSEMBLY WITH CASTORS The pedestal should be High Pressure Die cast polished Aluminum and fitted with 5 nos. twin wheel castors. The pedestal should be 65.00.5cm, pitch-center dia (75.0 1.0cm. With castors TWIN WHEEL CASTORS The twin wheel castors should be injection moulded in black PP having 6.0% 0.1cm wheel Diameter Overall Dimensions of Chair Seat Height-min 45.5 to max 56.5cm Height-min 95.5 tu max 105.5 cm. Watth & Depth of Chair as measured frum pedestal Width-75.0 cm and Depth-75.0 cm This product should be certified by Indoor Advantage GOLD, GREENGUARD GOLD, GRIHA & SVAGRIHA, BIFMA Level 2 & GREEN PRO Officer Chair Providing, supplying and placing of High Back Chair. SEAT ASSEMBLY: The seat is made up of 1.550.1 cm thicks hot-pressed plywood supholstered with fabric and moulded polyurethane foam. SEAT SIZE: 51.5cm (W) x 49.7cm (D BACK ASSEMBLY: The Back is injection moulded in glass filled Polypropylene which is 2 upholstered with Mesh fatiric. The back consist of adjustable Lumbar support made of injection moulded Polypropylene having an adjustment of 5.0.10.1 cm. : : : BACK SIZE: 47.9cm(W) x 66.9 cm (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is muulled with density 45+/-2 kg/m and hardness 14 12 kgf as per 15:7888 for 20% compression. ARMRESTS JAIXJUSTABLE) The height adjustable armrest is made of Polypropylene and can be adjusted to 6.010. Lem height it also has swivel and To and Fro adjustment with moulded PU armtop ACTIVE BIO-SYNCHRO MECHANISM: The adjustalile tilting mechanism is designed with the following features 3511 revolving type Front-pivot for tilt with feet resting on ground & continuous lamber support ensuring more comfort Till tension adjustment can be operated in seating position 5 position Tilt limiter giving option of variable sit angle to the chair Sest/back tilting ratio of 1:2 The mechanism housing is made up of HFDC Aluminium & black powder coated (DFT 40 to 60 micron) HEADREST The Headrest sub-assembly is made up of injection mouldet glass filed Polypropylene which is upholstered with moulded HR polyurethane loam and fabric has an adjustment of 3.00.1cm & it in assembled over GRETA 20F The complete headrest assembly is tetro fic to the main chair PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 10.010.3cm FEDESTAL ASSEMBLY: The pedestal in injection moulded in black 30% glass-filled Nylon and fitted with 5 nos twin wheel castors. The pedestal pitch-centerdia is 166.140.5 cm.(76.110 cm. with castursl TWIN WHEEL CASTORS: The twin wheel castors are Injection moulded in black Polyamide harving 6.01 0. Leam wheel Diameter. WIDTH (W)-76.0cm DEPTH (D) 76,0 HEIGHT (H-114.0 cm 123.5cm SEAT HEKHT-43.5-54.0cm This product should be certified Iry Indoor Advantage GOLD, GREENGUARD GOLD, BIFMA LEVEL 2 & GREENPRO Visitor Chair Providing, supplying and placing of Visitor Chair SEAT ASSEMBLY: The seat assembly should be made up of 1.9 từ 1cm thicle hot-pressed plywood upholstered with fabric upholstery covers and mouided Polyurethane foam. SEAT SIZE: 47.0 cm (W) x 48.0 cm (D) BACK ASSEMBLY The back asembly, should be made of powder coated (OPT 40-60 micronat tubular frame of 02.54 ±0.03cm. x 0.2 ±0.016cm k MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mealh fabric with high. tenacity yarn BACK SIZE: 46.5 cm. (W) x 60.5см. (Н) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be motilded with density 45+/-2 kg/ma and hardness load 16.12 Igf for 25% compression ARMRESTS: The one-piece armresta should be injection moulded from black Co-polymer Polypropylene. TUBULAR FRAME: The powder coated (DFT 40-50 micron tubular frame should be cantilever type made of 02.54 10.00cm. x 0.2 10.016cm thick M.SE.R.W. Tube Overall Dimensions of Chair Seat Height-46.5cm. Height-03.5cm Width & Depth of Chair as measured from pedestal Width-01.0 cm and Depth-64.5 cm. RECORD ROOM Modular Storage unit Providing, placing and supplying of storage unit: Overall Dinansians of 851 Single Static 1 Bay Push Pull Type (U/C + Fittings shall De 1200mm(W)x400mm(Djx2083mm(H). The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to 18: 513. Each body shall have a main unit plus add on units 11,2,3,4,5). Final finish consists of epoxy polyester powder conting of approved colork shade with a Dry Film Thickness of minimum 40 microna Shelf construction made of 0.7 thk CRCA steel conforming to 18: 513 Gr.D or DD. Uniformly distributed load capacity of 100 Kg Undercarriage shall have construction in welded frume CRCA sheet 2 mmthk conforming to 15:513. The movements of the system shall be Push pull configuration [TYPE-P1/TYPE-1 Movement of units achieved by pushing or pulling C tyep plastic handle (mounted on sach double & single movable units & rigidly fixed at suitable height on body side. y. Bach movable body also has an understructure with 4 nos el antifriction ball bearings for rolling on channels. The twin moving body, Ln. TM, has 4 nos, of bearing litted horizontally to restrict the lateral muvement of the body on rail while the single moving body, Le. St, hody has 2 non. of a special anti-tilt bearing assembly fitted to the understructure which not only restricts lateral movement but also prevents SL freen topping. A Centralized locking arrangement is provided through Locking Stiffener mounted onto back of Single Last unit, is. SL body, I gets locked into the channels when all the units are brought together, and the lock is turned. The Renas handle lock is of placed at a height of 940mm from ground level. The locking stiffener is made of 1.2 mm thik conforming to 18.513. Hinged dooms have Recessed Die cast Handle cum locit with. 3 way locking through a lever & shooting bolts. The nuts bolta are galvanized / blackodised/Zt Mated. Label Holder It is an aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fimed on to front cover of body. The Paper is 30005M matt milky white sticker paper, to be inserted into the alaminium extrusion. The length of paper is 304mm LD/BD and 794mm TD Over that a transparent plastic of corresponding length of 150-200 micron polythene to be inserted. Providing, placing and supplying of storage unit: Overall Dimensione of SLI - Single last 1 Buy Push Pull Type (U/C + Futings) shall be 1200mm(W)x400mm(Dpx2083mm(H) The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to 19:513. Each body shall have a main unit plus add on units (1,2,3,4,5). Final fish consists of epoxy polyester powder coating of approved colorfe shade with a Dry Film Thickness of minimum 40 microns Shelf construction made of 0.7 thie CRCA steel conforming in 18: 513 Gr.Dor DD.Uniformly distributed kad capacity of 100 Kg Undercarriage shall have construction in welded frame CRCA sheer 2 mmthk conforming to 18:533. The movements of the system shall be Push pull configuration (TYPE-PI/TYPE-P2 Movement of units achieved by pushing or pulling C tyep plastic handle (mounted on each double single movable unital & rigidly fined at suitable height on body side Each movshle body alan has an understructure with 4 nos of antifriction ball bearings for rolling on channels. The twin moving body, ie TM, has 4 nos of hearing fitted horizontally to restrict the lateral movement of the body in rail while the single moving body, Le SL, body has 2 nos of a special anti-tilt bearing assembly fitted to the understruture which not only restricta lateral movement but also prevents SL from toppling, A Centralined locking arrangement is providesi through Locking Stiffener mounted onte back of Bingle Laat unit, Le BL body. It gets locked into the channels when all the units are brought together, and the lock is turned. The Receas handle lock is of placed at a height of 940mm from ground level. The locking stiffener is made of 1.2 mm the conforming to 15:513. Hinged doors have Recessed Die cast Handle cum lock with 3 way locking through a lever is shooting bolts. The nuts & bolts are galvaniand/blackodised/Zn Plated. Label Holder: It is an aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fitted on to front cover af body. The Paper is 300GSM matt milky white sticker paper, to be inserted into the aluminnum extrusion. The length of paper is 394mm for LD/SD and 794mm for TD Over that a transparent plastic of correspunding length of 150-200 micron polythene is to be inserted. Providing, placing and supplying of storage unit: Overall Dimensions of TM1 Twin Mobile 1 Bay Push Pull Type U/C Fittings Handle shall be 915mm(W)x762mm(Djx2083mm(H). The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to 18 513, Bach body shall have a main unit plus add on units (1,2,3,4,5) Finish shall be Epoxy polyester powder coated thickness of 40 maruns Shelf zunstruction shall be made from CRCA steel 0.7 mm thick 18:513 Unibemly distributed load capacity of 60 Kg Undercarriage shall have construction in welded frame CRCA sheet 2 mmthk conforming to 18:511. The movements of the system shall be Push pull configuration [TYPE-PL/TYPE-P2): Movement of uniis achieved by pushing or pulling C tyep plastic handle (mounted on sach double & single movable units & rigidly foed at suitable heigist on body side Each movable body also has an understructure with 4 nos of antifriction hall bearings for rolling on channels. The tain moving body, Le. TM, has 4 nos, of bearing fitted borunntally to restrict the lateral movement of the body on rail while the single maring body, Le. SE, body has 2 cos. of a special anti-tilt bearing assersbly fined the understructare which mot only restricta lateral movement but also prevents L from toppling. A Centralised locking arrangement is provided through Locking Stiffener mounted onto back of Single Last unit, le. S body. It gets locked into the channels when all the units are brought together, and the lock in turned. The Recons handle lock is of placed at a beight of 940mm from ground level. The locking stiflener in made of 1.2 mm the conforming to 15:513. Hinged doors have fecessed Die cant Handle cum lock with 3 way locking through a lever & shooting bolts. The mats & bolts are galvanized/blackodized/Zn Plaid Label Holder: It is an aluminium estrusion of length 396mm for LD/BD and 796mm for TD, fitted on to front cover of body. The Paper is 30008M matt milky white sticker paper, to be inserted into the aluminium extrusion. The length of paper is 394mm for LD/SD and 794mm for TD, Over that a transparent plastic of corresponding length of 150-200 micron polythene is to be inserted. // When the last unit in twin movable, hinged doors are provided for the end bodies, so in this case locking stiffener is mounted into twin unit. It consists of C section 2 mm the HR sheet & Square 25.4mm X 2mm the ERW tube - both connected by screws. Prior to the grouting of the guide channels with the help of raul plug & acrew, ensure the ground is level. The rail channels are of a lengths Le., 800mm, 1000mm and 2400mm. TECHNICAL SUPPORT Officer Tahle 2100 RH RU 1200 PDL 2100x2250x750 • Supplying and placing in position Main Table, ERU& pedestal of the following specifications 1650x1950x750 Primary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to 18-14587:1998 with 0.4mm PVC membrane gressed on to top. Soft closing access lap with in-build pewer box are provided on work surface for wire management Secondary Work Surface Made of 25mm thick MDF one side pre-laminate board confirming to 18-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel Made of 25mm thick MDF one side pre-laminate hoard confirming to 15-14587 1998 with 0.4mm PVC membrane pressed on to top. Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to 18-12823-1990, Edge handed with matching 2 mm thick PVC lipping Integrated Pedestal Made of 25mm Thick Pre laminated twin board of EL-P2 grade and approved shade confirming to 15-12823-1990, Edge banded with matching 2 mm thick PVC lipping Drawer frunts made of 35mm thick MDF one side pre-laminate board confirming to 18-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which. Uses powder coated 400 MM lorng metal Panel Drawer Säden Drawer extension in 325 мм. Drawers have a soft closing & anti slam mechaniam. Handles are provided for nase of opening Pedestala are provided with lock for securry. This product should be certified by GREENGUARD, Indoor Advantage GOLD & GREEN PRO BACK UNIT 1800W 750H Supplying and placing in position Back unit of the following spesifications. 16508500x1100 Top Panel-Made of 25mm thick MDF one side pre-laminate board confirming to 18-14587:1998 with 0.4mm PVC membrane pressed on to top Slide Door Unit Made of 35mm Thick Pre-laminated twin board of EI-P2 grade and approved shade confirming το 18-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like sade, bottom,hack and shelves Shutters are made of 25mm chick MDF one side pre-laminated confirming to 18-14587:1998 with 0.4mm PVC membrane pressed on is top. Shutters have a suft closing å anti slam mechanism. Handles are provided for ease of opening Storage is provided with lock for security This product shall be certified by GREENGUARD, Indoor Advantage GOLD & GREEN PRO OFFICER Chair Providing, supplying and placing of Mid Back Chair BRAT/BACK ASSEMBLY: The Cushioned scut assembly consshoull be ta of sest outer (material-30% Glass Fiber Nylonja upholstered Seat inner material Poly Propylene) with moulded Polyurethane foam polyster fabric. The Net Hack should be made up of Back outer (material-Class Fiber filled Nylonis Back inner (material PP and upholstered using Polyester Men fabric with high tenacity yarn. Full Back Siam: 46.5 cm. (W) x 60.0 cm. (H) Seat Size: 51.0 cm. (W) x 49.0 cm. (D HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foum shoulit be moulded with density 45/2 kg/cm² and Hardness load 12+/-3 kg loe 259% compression. BACK SPINE The support spine should be made up of High Pressure Die cast polshed hedAluminum. ARMRESTS The armrest should be having two adjustment, Height (6.010.5cm) and Depth 16.060.5cm). Height adjustment should be provided in Aluminum structure of armrest which should be connected to Aluminum Back spine and should be operated by button. The depth adjustment should be provided in pad which should be fixed to armrest structure. Armrest Top shuruld be made up of PU mokind over plastic inner. ACTIVE BIO-SYNCHRO mechanism: The adjustable tilting mechaniam should be designed with the folloering footurma 360° revolving type Front-pivet for tilt with feet resting on ground & continuous lumber support ensuring more comfort Tilt tension adjustment can be operated in seating position 5 position. Tiit limiter giving option of variable riit angle to the chair Seat/hack tilting ratio of 1:2 The mechanism housing should be made up of HPDC Aluminuma black powder coated (DPT 40 m 60 micron) SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in the seat through a shding mechaniam, Seat depth adjustment range should be of 3.750.1 LUMBAR SUPPORT ASSEMBLY: The Lumbar support assembly should consist of bambar spine (material-Glass Fiber Filled Nylam) which should be fixed to Aluminum Back spine. The Lumbar pad (material Poly Propylene) should be fixed to zambar spine through lumbar Pad support. Lumibae Support Assembly has height adjustment of 5.040.5cm. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has en adjustment stroke of 19.00.3 PEDESTAL ASSEMBLY WITH CASTORS The pedestal should be High Pressure Die taat polished Aluminum and fitted with 5 nos, twin wheel castorn. The pedental should be 55.0 0.5cm, pish-center dis (75.0 1. Ocis With castors. TWIN WHEEL CASTORS The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter Overall Dimensions of Chair Seat Height min 45.5 to max 55.5cm. Height min 95.5 to max 105.5 cm. Width & Depth of Chair ne measured from pedestal Width-75.0 cm and Depth-75.0 cm This product should be certified by Indoor Advantage GOLD, GREENGUARD GOLD, GRIHA & BVAGRIHA, BIFMA Level 2 & GREEN PRO Visitor Chair Providing, supplying and placing of Visitor Chair. BEAT ASSEMBLY: The sont assembly should be made up of 1.2.20. 1cm, thích hot-pressed plywood upholstered with fabric upholstery covers and mouldst Polyurethane Foam. SEAT SIZE: 47.0 cm. (W) x 48.0 cm, BACK ASSEMBLY: The back asembly, should be made of powder coated (OFT 40-60 microns tubular frame of 0 2.34 20.03cm. x 0.2 ±0.015m thửMS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn BACK BIZE 46.5 cm. (W) x 60.5см. (Н) HIGH RESILIENCE (HR) POLYURETHANE POAM: The Hit polyurethane foam should be moulled with density 45+/-2 kg/m3 and hardness load 16±2 kgf for 25% compression. ARMRESTS The one-piece armrests should be injection moulded from black Co-polymer Polypropylene TUBULAR FRAME The powder coated (DFT 40-60 micronaj tubular frame should be castilever type & made of 02.54 10:03 0.2 0.015cm thick MSER.W. Tube Overall Dimensions of Chair Snat Height 46.5cm. Height 93.5cm. Width & Depth of Chair as measured from pedestal Width 61.0 con and Depth-64.5 cm Coffee table LxWxH-1200x600x425 Table-top-inm Toughened Clear Glass top PLT-18 mm thick in Cinnamon Configuration-Shelf storage Display Spate Dual drawer concealed storage Sofa set 1+1+3 Dimensions (in cm) - Width-101cm Depth-93cm Height-89cm Seat Height-46cm Dimensions (in comi Width 201cm. Depth-93cm Height-89cm Seat Height 46cm Upholstery: Composte Leather. Pure Leather at touch points sust and backrent and Syen Lth at non touch point matching with the pure leather Leather Type: Pigmented Syn Leather PVC Thickness of upholstery: Leather I mm Syn Lth: Imm Shade Black Frame: Materini-Solid wood frame with ply wood cross section Moisture Content: 12% Foam Density: Seat: 28 kg/ rubic meter Back: Conjugated hollow fiber Webhing: 8 spring Lags Rubber w MEETING ROOM Meeting Chair : BACK ASSEMBLY The hack asembly should be made of powder conteul (OFT 40-60 micruna) tutrudar frame of 02.54 0.03cm x 0.2 10.0156cm.ihk MS ERW tube designed with contoured lambar support for extra comfort. The bacit should be upholstered using double layer spacer menh fabric with high tenacity yarn. : Providing, supplying and placing of Visitor Chair SEAT ASSEMBLY: The seat ansambly should be made up of 1.2 10. 1cm thick hot-pressed plywood upholstered with fabric upholstery covers and mrulded Polyurethane foam. BEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D) BACK SIZE: 46.5 cm (W) x 60.5cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density 45+/-2 kg/m3 and hardness loud 160-12 kgf. for 25% compression ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene TUBULAR FRAME The powder coated (DIFT 40-60 micronsi rubular frame should be cantilever type M.SER.W. Tube made of 02.54 0.03cm. x 0.2 0.016cm thick Overall Dunensions of Chair Seat Height-465 Height-92.5cm Width & Depth of Chair as measured from pedestal Width-610 cm and Depth-64.5 cm. Head Chair : : Providing, supplying and placing of High Back Chair SEAT ASSEMBLY The sest is made up of 1.540.1 cm thick hot-prused plywood upholstered with fabric and moulded polyurethane foam. SEAT SIZE:51.8cm (W) x 49.7m(D) BACK ASSEMBLY The Back is injection meuided in glass filled Polypropylene which is 2 upholstered with Mesh fabric. The back consist of adjustalás Lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 10.1 cm. BACK SIZE: 47.9cm(W) x 66.9 cm (H) HIGH RESILIENCE (HRD) POLYURETHANE POAM The HR polyurethanes foam is moulded with density 45+/-2 kg/m anil hardness 14 ag as per 18:7888 for 25% compression. ARMRESTS (ADJUSTABLE) The height adjustable armrest is made of Préypropylene and can be adjusted to 6.010.1cm height it also has swivel and
