|
| 1 | Supply of steel tubular pole swaged type as per IS:2713- 1980 complete with base plate and top Canopy Item no 42.3 page 140410 SP-14 - 8.00 metre 42.3.5 |
| 2 | Erection of RS Joist pole/\"H\" beam/steeltubular/ steel rail pole of length 7 metres but not exceeding 10 metres in cement concrete 1:3:6 (1 cement : 3 core sand: 6 graded stone aggregate 40mm nominal size) base, foundation, muffing including excavation and back refilling etc. as required. 42.19 page no 143 |
| 3 | Supplying & drawing/laying of PVC insulated XLPE aerial bunch power cable conductor H2/H4 grade aluminium solid/stranded conforming to IS-14255- 1995, alu. alloy insulated messenger 1100 voltsrade cable of approved make in air with necessary material as per specification of required size as mentioned below – 42.90 page 151Single core cable(insulated neutral messenger) 42.90.23x95 sq.mm, 1x16(st. light), 1x50(insulated neutral messenger) 42.90.2.5 |
| 4 | Supplying & fixing of aerial bunch cable accessories suspension clamp i/c required attachment for single core cable of approved make on pole with clamp, necessary material as per specification for required size. 42.91 |
| 5 | Supplying &fixing of aerial bunch cable accessories tension clamp (dead end) i/c required attachmentor single core cable of approved make in air with clamp, necessary material as per specification for required size. |
| 6 | Supplying & fixing of waterproof insulation piercing connector for aerial bunch cable i/c required attachment for single core cable of approved make in air with necessary material as per specification of required size as mentioned below – 42.93 page 152Main:16-95sq.mm, tap:1.5-50sq.mm 42.93.1 |
| 7 | Supply, fixing, testing & commissioning wall/floor mounted LT panel primer coated with powder coated paint & provided with required gasket for dust/vermin proof with degree of protection IP42 suitable for 415Volt 3 phase, 50 Hz, 4 wire system fabricated out of CRCA sheet upto 2 mm thick (1.6 mm for doors) duly compartmentalized for incomer, bus section, outgoings, cable alleys & CT, PT Ampere Metre, Volt Metre, selector switches, frequency Metre, phase indicating lamp, Energy Metre complete including cost of busbar supports, detachable cable gland plates, 2 earthing terminals, internal wiring & fixing of separately supplied MCBs, MCCBs, ACB, panel mounted changeover switch/SFUs, etc. as required but excluding cost of busbar strips, Ampere Metre, Volt Metre, selector switch as per approved design & specification As per item No 29.27 page No 77 |
| 8 | Supply and fixing of LT panel accessories of approved make in existing LT panel including connections etc. as required as per specification. Item No 29.28 Page no 77 |
| 9 | Digital Ampere Metre with CTs with selector switch 29.28.1 |
| 10 | Digital Volt Metre with selector switch & HRC fuse 29.28.2 |
| 11 | Frequency Metre 29.28.3 |
| 12 | Multifunction Meter 29.28.4 |
| 13 | Aluminium bus bar strips with PVC sleeves 29.28.6 |
| 14 | LED lamp indicator 29.28.7 |
| 15 | Supplying and fixing of capacitor duty contactor of approved make in existing power factor/LT panel including connections etc.as required as per specification.Item No 29.29 Page no 77Upto 3 kVAR 440V,3Ph,50Hz, Aux contact-1NO |
| 16 | Supply of rubber mat 2 x 1.0Mtr, 1100V tested Item No 42.77 Page no 150 |
| 17 | Supply and fixing Led tube rod comprising of LED tube with non-integral/integral driver, upto 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with system efficacy> 100 lm/Watt. LED driver PF> 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job.Tube light LED 1 X 20/22Watt, Integral i/c batten aluminium body, PC diffuser 31.3.4 Item No 31.3 Page no 82 |
| 18 | Supplying fixing and testing of approved and suitable make LED driver for an existing LED street light. 40Watt to 48Watt, color temp 3000-6500k 31.25.231.25 Page No 87 |
| 19 | Supply and fixing street light with high power LED of 3 to 6 Watt each on existing bracket assembled on single MCPCB and additional unique peanut lens on each LED, system lumens output with efficacy>120 lm/Watt. luminiare having color temp upto 6500K & 50000 hrs. burning life with minimum @ L 70, The colour rendering index of LED light should be more than 70. Luminiare comprises of driver, PF> 0.95 & surge protection 10KV. Housing made of pressure die cast aluminium with heat resistant flat glass, IP65 protection. Submission LM 79- 08/IS16106 (2012), IEC60598, IEC61347 i/c connection wire, testing etc. to complete the job. 40Watt to 48Watt, color temp 3000-6500k as required.31.13.1 As per item no31.13 |
| 20 | Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of \"C\" series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- As per 27.8 Page no 65Single pole 27.8.1 |
| 21 | MCB SP 6Amp to 32Amp 10kA rating 27.8.1.2 |
| 22 | MCB SP 50Amp to 63Amp 10kA rating 27.8.1.4 |
| 23 | Supply of I.S.I. Marked iron clad / metal clad triple pole and neutral switch fuse (conduit entry ) /cable gland entry with two earthing terminals --100 Amps. 415/500 Volts. 25.2.4 As per 25.2 Page no 63 |
