|
| 1 | Supplying, installation on wall,testing and commssioing of flowing capacity Air Insulated Compact type Rising Mains for use on 3 phase 4 wire 415V 50Hz AC supply with enclosure having IP-54 rating after the tap off boxes and all accessories made od 1.6mm thicksteel sheet duly powder coated in convenient section completd with 4 Nos alluminums bus bar having current density of 130A/sqcm at nominal current rarting necessary joints,expansion joint, fire barrier at each floor provision of tapping at every meter, contineous earthing with 2 nos aluminum strip of suitable size ( one on each side) including G.I clamping bracketsangles iron bracket, steel fasteners,connecting to earth system etc. as required ( Make Legrand/Schneider/L&T/C&S) |
| 2 | 400A Isc-30Ka for 1 Second |
| 3 | Supplying , Installation ,testing & Commissioing of floowing capacity End feed unit for the existing Air insulated Compact type bus trucking /rising main for use on 3 phase 4 wire 415V ,50Hz AC supply made with 1.6mm thick sheet steel enclouser ( IP54) duly powder coated with provisioin of MCCB/ACB( but without MCCB/ACB) complete as required provison of MCCB/ACB ( But without MCCB/ACB) complete etc as required( Make Legrand/Schneider/L&T/C&S) |
| 4 | 400A Isc-30Ka for 1 Second |
| 5 | Supplying, installation ,testing & commisioing of following capacity plug In/tap off box on the existing Air insulated Compact type bus trucking/rising main for use on 3 phase 4 wire 415V ,50Hz AC supply made with 1.6mm thick sheet steel enclouser ( IP54) duly powder coated with provisioin of MCCB/ACB( but without MCCB/ACB) complete as required provison of MCCB/ACB ( But without MCCB/ACB) complete etc as required( Make Legrand/Schneider/L&T/C&S) |
| 6 | 200A Isc-25Ka for 1 Second |
| 7 | 125A Isc-15Ka for 1 Second |
| 8 | Provoding and fixing following rating and breaking capacity and pole MCCB with thermomagnetic relase and terminal spreader in existing cubicles board including drilling holes in cubicles panel making connection etc as required ( Make Legrand/Schneider/L&T/C&S) |
| 9 | i) 400A,50KA FPMCCB |
| 10 | ii)200A ,36KA FPMCCB |
| 11 | iii)125A ,36KA FPMCCB |
| 12 | Laying and fixing of one number PVC insulated and PVC sheahed/XLPE power cable of 1.1KV grade of follwing size on wall surface as required |
| 13 | i) Above 95 sqmm up tp 185 sqmm ( Clamped with 25/40X3 mm MS flat clamp) |
| 14 | Supply and making end termination with brass compression gland and alluminium lugs for following of PVC /XLPE aluminium conductor cable of 1.1KV grade as required |
| 15 | i) 3 1/2 core 120 sqmm |
| 16 | Supply of 1.1KV Grade PVC/XLPE insulated Armored Aluminium underground Cable ( Approved Make ,Havells,KEI,Polycab,RR Kabel,RPG,NICCo,Finolex, CCI Incab) |
| 17 | i) 120 sqmm 3 1/2Core |
| 18 | Buy Back |
| 19 | Buy back of of Raising main Bustrunking system includesaluminium busbar and MS sheet enclosure cover as directed by the Engineer Incharge |
| 20 | Note: Total Amount is calculated after deducting buy back (i.e. Item No. 8.01) value of bus trunking |
