|
| 1 | S/F Factory made Meter board Panel with concealed metal hinged door made of Thermosetting plastic SMC sheet with provision of holes for cable entry at bottom, rubber gasket for door with sloped roof for rain water drain etc having space provision for fixing 3 phase Energy meter & accessories like cut out fuse units, nutral link, RCCB, 4 Pole Isolator, 4 pole changeover switch with enclosure, DIN channel for fixing the switch gears etc i/c giving inter connection with 6 sq.mm copper conductor cable & fixing panel on existing wall surface/ angle iron stand, givingcable connections, sign writing the meter board etc. as reqd. (Make: Sintex, Model: GSMB 9045/GSJB 9045, Internal size: 900x 450x 250 or Similar superior make) (Note;Necessary laisoning work with KSEB authority should be done by the contractor for availing service connection ) |
| 2 | S/F 6mm thick phenolic/SMC plank/hylam sheet of approx. size (900x 450 mm) mm suitable for fixing Energy meter, Fuses, RCCB, FP isolator, changeover switch etc. as required. |
| 3 | Supplying and fixing 3 Nos. 63 Amps rating, rewirable porcelain type cut out fuses and 1 No. bakellite neutral link (63A) complete with connections, testing and commissioning etc. as required. |
| 4 | Supplying and fixing 63 Amps rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB),having a sensitivity current 300 mA in the existing meter panel complete with connections, testing and commissioning etc. as required. |
| 5 | Supplying and fixing 63 A, 415 volts, 4 pole isolator in the existing meter panel complete with connections, testing and commissioning etc. as required. |
| 6 | Providing and fixing MS angle iron frame of size38 mm x 38 mm x 5mm for fixing the MB including cutting, welding and painting with two coats of metal primer and two coats of metal enamel paint etc complete as required. |
| 7 | Providing and fixing MS flat of size38 mm x 5mm as cross members for fixing the MB including cutting, welding and painting with two coats of metal primer and two coats of metal enamel paint etc complete as required. |
| 8 | ProvidingCement concrete foundation of approx size 0.60 x 0.40 x 0.40 m for erecting the angle Iron structure, plastering, finishing, applying cement primeretc complete as required. |
| 9 | S/f 63A, 4 pole onload change over switch with enclosure in the existing meter board I/c giving connections, testing, commissioning etc. complete as required. |
| 10 | S/F 40 mm dia\"B\" class GI pipe with accessories like bend, socket for service connection including nesessary supports, painting etc., as required. (BSNL approved make) |
| 11 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 12 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 13 | Providing and fixing 25mm x 5mm GI strip on surface or in recess for connections etc. as required. |
| 14 | Supplying and fixing following ways surface/recess mounting vertical type ,415V ,TPN MCB distribution board of , sheet steel,dust protected ,duly powder paited ,inclusive of 100A tinned copper bus bar ,common neutral link,earth bar,din barfor mountingMCBs(But with out MCBsand incommer )as required |
| 15 | 4 Way (4+12),Double door |
| 16 | S/Ffollowing rating MCBs /isolatorin the existing MCB DB complete with connections testiong and commissioning etc. as reqd. |
| 17 | 63 A 4 PIsolator |
| 18 | 32 ATP MCB |
| 19 | SP MCB\"C\" series 5 to 32 A ,240V |
| 20 | MCB Blanking plate |
| 21 | S/F PVC 4 Module Waterproof Gang Box with 1 No 5/6 amp socket outlet and 2 Nos 5/6 amps switch including interconnection etc complete as reqd. |
| 22 | Wiring for circuit/sub mainwiring along with earth wire withthe following sizes ofFRPVC insulated copper conductor, single core cable in surface/recessedPVC conduitetc as required.(SR) |
| 23 | 2 x 1.5 mm²+1x1.5 mm² earth wire(SR) |
| 24 | Supplying and fixing Bulk head fitting suitable for230V, 9 W LED bulb with accessories including interconnections,i/c Supplying and fixing 9W LED lamp, testing and commissioning etc. required (Bajaj/ Dalal or sim. Sup. Make) |
| 25 | Providing necessary frame work for fixing the Vetical DB including providing necessary rain water protection with the following members including suitable welding, fixing, drilling, grinding, painting etc. |
| 26 | 25 x 25 x 3 mm thick MS angle iron |
| 27 | 1 mm thick FRP sheet |
| 28 | Supplying and laying 2x1.5 sqmm PVC insulated,PVC sheathedcopper conductor armouredcable including providing end termination in the following manner as required (Reputed cable brand with ISI Certification) |
| 29 | On surface of wall/On GSM Tower in existing cable tray |
| 30 | loose inside the panel/in existing pipe |
| 31 | SITC of LED based Aviation obstruction lamp Red coloured light with inbuilt automatic daylight/night redundant sensor twilight switch designed inaccordance with ICAO specification for Type B Aviation light, IP 66 Protection suitable for operation on 90-260V 1Ph AC supply ./ 25-50 Volts DCsupply as per requirement including fixing on the top of on existing 40m high narrow based GSM tower tower with the suitable arrangement , making holes, nut & bolts etc., as reqd.( the input voltage requirement AC/DC as per the site requirement)(M/s Ray dyamics make model ,LIT32-XWB model or Smlr. supr. Make) |
| 32 | Providing and fixing isolation transformer of capacity 50VA suitable for 230V, 50Hz AC Supply in a suitable PVC/FRP casing to protect the same from rain water on the existing tower etc as reqd. |
| 33 | RDSO approved Chemical earthingfor Equipment earthing /lightningconductor withearth electrodemade of high tensile low carbon steel circular rods, molecularly bonded with copper on outer surface to meet the requirements of Underwriters Laboratories (UL) 467-2007 or latest or IEC 62561 having high tensile strength of not less than 50kg /m2 , high corrosion resistant strength,by diggingand filling Earth enhancement compound together with back fill soil as per specification i/c providing masonay enclosure with cover plate etc. .(M/s CAFE or any RDSO approved Make) |
| 34 | S/F 40 mm dia\"B\" class GI pipefor cable protection including digging the soil ,making good etc., as required.(BSNL approved make) |
| 35 | Supplying and laying of following size DWC HDPE pipe ISI markedalong with all accessories like socket,bend,couplers etc confirming to IS 14930 ,Part II complete with fitting and cutting ,joiningetc direct in ground (75 cm below ground level) including excavationand refillingthe trench but excluding sand cushioningand protective covering etc complete as reqd |
| 36 | 63 mm dia(OD-63mm&ID 51mm nominal) |
| 37 | Supplying and laying of following size perforated hot dipped galavanised iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5% in convenient sections ,joined with connections ,uspended from the ceiling with G.I.suspender including GI bolts and nuts etc as reqd |
| 38 | 300mm widthX50mm depth X1.6 mm thicknes |
| 39 | Supplying, laying and fixing of one numberPVC insulated and PVC sheathed/ XLPE Al power cable of 1.1KV grade of 4 C 25sq.mm in following ways including all as required. |
| 40 | In existingRCC/ HUME/ METAL/DWCpipe |
| 41 | On surface of wall /Existing Cable tray(Clamped with 1mm thick saddle) |
| 42 | In masnory opend duct / loose in panel |
| 43 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 44 | 4X 25 sq. mm |
| 45 | P/F 6 SWG dia GI wire on surface/recess for loop earthing as reqd.(SR) |
| 46 | Supplying and fixing GI earth bus bar of size 300X50x10 mm size on suraface of wall with suitable insulators for mounting etc as reqd |
| 47 | Lifting up / Lifting down of the EA set Upto 30 KVA Capacity conventional type/Canopy / RTU type - between the floors (from/ to the room or rooftop where the EA plinth located) as below with suitable crane/ pulley/ manpower arrangement as the per the site requirement without any damage etc complete as required. |
| 48 | lifting up OR down between ground level up to 2nd floor |
