Labour charges for, Erection of 110 KV switch, LAS, support structures, equipments and earthing and Providing plinths etc ( Balance Civil & SSEworks)for the enhancement of Power Transformer capacity from 2x16 MVA into 3x16 MVA in 110/11 KV ratio at existingSaravanampatty110/22- 11KV SS in Coimbatore EDC North- 1 Supply ofMS channel 100 x50 mm ISMCfrom approved vendorsof Sail,Tata,Jindal,RINL,Essar Steel,Jindal Steel,JSW Steel,Tulsyan and Prakash Ferrous Industries industries PVT Ltd and Nobel as per IS 2062 and latest issue., 2 Supply ofMS Angle 100x100x8ISMA from approved vendorsof Sail,Tata,Jindal,RINL,Essar Steel,Jindal Steel,JSW Steel,Tulsyan and Prakash Ferrous Industries industries PVT Ltd and Nobel as per IS 2062 and latest issue. 3 Supply of MS Angle 65 x65x6mm ISMAfrom approved vendorsof Sail,Tata,Jindal,RINL,Essar Steel,Jindal Steel,JSW Steel,Tulsyan and Prakash Ferrous Industries industries PVT Ltd and Nobel as per IS 2062 and latest issue. 4 Supply of MS Angle 50 x50x6mm ISMAfrom approved vendorsof Sail,Tata,Jindal,RINL,Essar Steel,Jindal Steel,JSW Steel,Tulsyan and Prakash Ferrous Industries industries PVT Ltd and Nobel as per IS 2062 and latest issue. 5 Supply of ,MS Flat 65x10mmfrom approved vendorsof Sail,Tata,Jindal,RINL,Essar Steel,Jindal Steel,JSW Steel,Tulsyan and Prakash Ferrous Industries industries PVT Ltd and Nobel as per IS 2062 and latest issue., 6 Supply of MS Flat 50x8 from approved vendorsof Sail,Tata,Jindal,RINL,Essar Steel,Jindal Steel,JSW Steel,Tulsyan and Prakash Ferrous Industries industries PVT Ltd and Nobel as per IS 2062 and latest issue., 7 Supply of MS Flat 25x3mm from approved vendorsof Sail,Tata,Jindal,RINL,Essar Steel,Jindal Steel,JSW Steel,Tulsyan and Prakash Ferrous Industries industries PVT Ltd and Nobel as per IS 2062 and latest issue.,MS Flat 25x3mm 8 Supply of Earth Spikes by using 40mm M.S. Rod & GI Earth pipe at a height of 3mts,MS Angle, Bolt, Nut with washer (40mm Dia, 3m length) 9 Supply of eye boltof 18 - 20 mm dia GI rod of required length suitable for 110 KV ,33 kv ,22 KV and 11 KVstrung bus including cost of GI rod of required lengthGI nuts & washer as directed by the field Engineer. 10 Supply of M8, M9, M10, M12 & M16 full thread GI bolt, nuts & GI washer of various size with IS Grade for erection of insulator or any other purpose wherever required and as directed by the field Engineer. 11 Supply of `B` Class GI pipe for extension of tandum /down pipe for AB Switches and for any other work as required and as directed by field Engineer40mm dia 12 Supply of `B` Class GI pipe for extension of tandum /down pipe for AB Switches and for any other work as required and as directed by field Engineer 50 mm dia 13 Supply of Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.Tension fitting Clamp 6 Bolted for Zebra 14 Supply of Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.Tension fitting Clamp 4 Bolted for Zebra 15 Supply of Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.Switchend clamp for Single Zebra 16 Supply of Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.Switchend clamp for 3Busbar 17 Supply of Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.Switchend clamp for 2Busbar 18 Supply of Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.T Clamp for Zebra to Zebra 19 Supply of Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.T Clamp for 3 Bus to Single Zebra 20 Supply of Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification. T Clamp for 2 Bus to Single Zebra 21 Supply of Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.Freeend clamp for 3Busbar 22 Supply of Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.Freeend clamp for 2Busbar 23 Supply of Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification. Seating clamp for 3Busbar 24 Supply of Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.Reducer clamp for 3Bus to Zebra 25 Supply of Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification. 3Busbar Expansion clamp 26 Supply of Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification. 2Busbar Expansion clamp 27 Supply of Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification. PG Clamp for Zebra 28 Supply of Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification. L clamp for Zebra 29 Supply of Power Connectors including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification. Corana Bell 75mm 30 Aluminium Pad ofrequired size as directed by the field Engineer. 31 Supply of LC/ Key board of size 4x3ft out of 75x 25 mm Alu. frame embeddedwith 12 mm pre laminated wood particle board using screw on rear 2 Nos plain glass of 5 mm thick fixed with metal roller moving on Alu.channel should be provided on front with locking arrangements. LG glass piece should be fastened on the glass shutters for opening and closing wall clamp made out of 6mm plate should be provided on as per drawing along with hook for keys with token and as directed by the field Engineer includingcost of all materials. 32 Supply of reputed make long shackle 6 lever reputated make lock with triplicate keys for AB switches and for any other purpose including the cost of ring and key token as directed by the field Engineer. 33 Supply of flexible copper tape/rope for interlinking panel earthing and for any otherpurpose, on any sizes, including the cost of copper lugs at both ends as directed by thefield Engineer 34 Supply of ISI mark cable glands as directed by the field Engineer. 19/22mm 35 Supply of ISI mark cable glands as directed by the field Engineer. 25mm 36 Supply of ISI mark cable glands as directed by the field Engineer. 28mm 37 Supply of lugs, ferrules, sleeves, cable tie, insulation tape and other accessories for providing cable core end termination 38 Supply of ISI mark bakelite HRCfuse holder of reputed makein panels/ boxes for AC/DC/PT circuits wherever required as directed by the field Engineer. 16Amps 39 Supply of ISI mark HRC Fuse of reputed make in panels/ boxes for AC/DC/PT Circuits wherever required as directed by the field Engineer 2/5/10/16 AMPS 40 Supply of ISI mark HRC Fuse of reputed make in panels/ boxes for AC/DC/PT Circuits wherever required as directed by the field Engineer - Netural Links 41 Supply of ISI mark PorcelineFuse unitof reputed make in panels/ boxes for AC Circuits wherever required as directed by the field Engineer -16 Amps 42 Supply of ISI make MCB in panels/ Boxes of reputed make asdirected by the field Engineer 1Pole16Amps 43 Supply of ISI make MCB in panels/ Boxes of reputed make asdirected by the field Engineer 3Pole32 Amps 44 Supply of mounting channel suitable forCBTM 5 terminal block in panel /box as required and as directed by the field Engineer. 45 Supply of disconnected type terminal block suitable for CT Circuits in panels/ box as required & as directed by the field Engineer 46 Supply of CT/PT junction box out of 14Swg (2mm) M.S.Sheet wherever required as directed by the field Engineer. The box shall be vermin proof shall have sturdy hinges, provision for mounting terminal blocks and locking arrangements including cost of all materials. 400W x 300H X 150D 47 Supply of Paintincluding cost of paint, brush and consumables etc., Red Oxide paint 48 Supply of Paintincluding cost of paint, brush and consumables etc., Aluminium Paint 49 Supply of Paintincluding cost of paint, brush and consumables etc., Enamel Paint 50 SupplyofPVC Stickers for Breakers, Panels, chargers and General key Boardsas required and as directed by field Engineer, 51 Supplyof yard light steppedtubulurpole 8M Length Single Bracket pole with base Plate (400 x 400 x 10 mm) 114.30 mm OD ,x 5.40 mm thick ,4500 mm Length,88.90 mm OD ,x 4.85 mm thick ,1750 mm Length, 76.10 mm OD ,x 3.25 mm thick ,1750 mm including cost of LED light , Double Pole MCB ,fiittings,Junction box and painting in complete shape as per direction of field engineer and approved drawing. 52 Supply of LED lamp with fittings 40 W as per IS and as directed by field engineer. 53 SupplyofRubber matofsize2000X1000X10mm as per relavent ISI Code. 54 Labour Charges forMachineries, consumables for Fabrication of structures as per the drawing issued by field engineer. Lightsection with joints wherever necessary (sectional weight below 14Kg/Mtr) (Electricity supply will be brone by department) 55 Labour charges for Erection of structures as per the drawing issued by field engineer. Erection of Heavy section (sectional weight 14Kg/m and above) 56 Labour charges for Erection of structures as per the drawing issued by field engineer. Erection of Light section (sectional weight below 14Kg/m)under LC 57 Labour charges for Erection of structures as per the drawing issued by field engineer. Erection of Light section (sectional weight below 14Kg/m) 58 Labour charges forDismantling of Light section Structure(sectional weight below 14Kg/m) under LC 59 Labour charges forErectionof Stool for 33/22/11 KV insulators and also fixing of corona bells at the ends of busbars in a complete shape , with provision ofhardwares,etc. 60 Labour charges for erection of CT/PT junction box, AC distribution box, yard light box ,change over switch including fabrication of clamping arrangementswith provision ofhardwares,etc. 61 Labour charges for Erection of GI/MS pipe for extension of tandum /down pipe for AB Switches and for any other work as required by and as directed by field Engineer 62 Labour charges for Fixing of flexible copper tape/rope for interlinking panel earthing and for any other purpose as directed by the field Engineer 63 Labour charges for Erection of strung bus Labour for stringing of strung bus including hoisting of insulator and erection of eye bolt and hardware fittings 110 KV Single Zebra conductor (1 span 3 run)under LC 64 Labour charges for Erection of strung bus Labour for strining of strung bus including hoisting of insulator and erection of eye bolt and hardware fittings 110 KV Single Zebra conductor (1 span 3 run) 65 Labour charges for Erection of strung bus Labour for strining of strung bus including hoisting of insulator and erection of eye bolt and hardware fittings11 KV Single Zebra conductor (1 span 3 run)under LC 66 Labour Chargesfor erection of bus bar Without making bends with appropriate machineries and consumablesUsing 75mmIPS Aluminium tube 67 Labour Chargesfor erection of bus bar Without making bends with appropriate machineries and consumables Using 50 mmIPS Aluminium tube ( Under LC ) 68 Labour Charges for Dismantling of jumpers and droppers Upto height of 6mts from ground level (under LC) 69 Labour Charges for Dismantling of jumpers and droppers Upto height of 6mts to 10 mts from ground level (under LC) 70 Labour Chargesfor providing droppers and jumbersUpto height of 6mts from ground level (under LC) 71 Labour Charges forproviding droppers and jumbersUpto height of 6mts to 10mts from ground level (under LC) 72 Labour Charges forproviding droppers and jumbersUpto height of 6mts from ground level 73 Labour Chargesforproviding droppers Upto height of 6mts to 10mts from ground level 74 Labour charges for Gas cutting of M.S.Chequered plate 6mm thick. 75 Labour Chargesfor erection using contract crane and including fixing of tandom rod alignment & gas filling by proper tools and tacklesetc., as per standard - 110 KV SF6 Breaker 76 Labour ChargesforErection of auxiliaries equipment Labour for erection using crane with provision ofhardwares,etc.110KV CT,PT,NCT,reactor (one Single.Ph.unit) 77 Labour Charges for erection using contract crane and including fixing of tandom rod alignment & gas filling by proper tools and tacklesetc., as per standard 33/22/11KVVCB/SF6 Circuit Breaker 78 Labour Chargesfor erection of 33/22/11KV CT, PT, NCT, Reactor, auto recloser (one S.Ph or 3Ph. Unit)with provision ofhardwares,etc.(Using Manual Labour ) 79 Labour Chargesfor erection ofLAS including erection of base if required with provision ofhardwares,etc. Station type single/ Double pole stack 110 KV LAS 80 Labour Charges for erection ofLAS includingStation type single/ double pole stack 33 or 22 or 11 KV with provision of hardware, etc., Under LC 81 Labour Chargesv for erection of Isolator / AB Switches, including erection of insulators, alignment workswith provision ofhardwares,etc. withoutearth hand operated 110 KV 82 Labour Chargesfor erection of Isolator / AB Switches, including erection of insulators, alignment workswith provision ofhardwares,etc. without earth hand operated 33 or 22 or 11KV Under LC 83 Labour Charges for erection of single / double pole stack up right, underhang orsuspension. with provision ofhardwares,etc. - 110 KV 84 Labour Chargesfor erection of single / double pole stack up right, underhang orsuspension. with provision ofhardwares,etc. - 110 KV( Under LC ) +20% 85 Labour Chargesfor Fabrication and fixing of bell mouth ,insertion ofJumperin the solid core/ PT Isulators and other consumables & as directed by the field Engineer (Electricity supply will bedepartment) 86 Labour Charges Charges for assembling of panel, including supply & fabrication of MS flat 65x10mm for mounting arrangement and earthing of panel including hardwares.Simplex indoor / Out door 87 LabourChargesfor machineries, consumables for erection of earth mat(Electricity supply will be brone by department) 88 LabourCharges for machineries, consumables for erection of earth mat(Electricity supply will be brone by department) Under LC +20% 89 Labour Charges machineries, consumables for earth raisers for equipments and structures (Electricity supply will be brone by department) 90 Labour Chargesmachineries, consumables for earth raisers for equipments and structures (Electricity supply will be brone by department) Under LC +20% 91 Labour Charges machineries, consumables For fabrication & erection of earth spikes without Materials including sharpening of Top portion & Galvanising, welding & Clipping the earthwire to earthmat / earthpit(Electricity supply will be brone by department) 92 Labour Chargesfor excavation & refilling of avg depth of 0.8m x 0.3m for earth mat (Normal Soil ) 93 Labour Charges for excavation & refilling of trunch of avg. width of 0.3mts & avg depth of 0.4m for control cables/ Yard light cable 94 Labour Chargesfor Erection of single Fitting LED Pole 6 & 8 mts and Laying of cable inside the pole including testing for burning condition. 95 Labour Chargesfor erection of CFL/LED lamp fitting with fixture and fuse box including wiring and testing for burning condition including the cost of 15 amps 2Way strip connector and other consumables. 96 LabourCharges for laying of cable in duct/ trunch including the cost of Aluminium tag for identification.Upto 8 Core 97 Labour Charges for laying of cable in duct/ trunch including the cost of Aluminium tag for identification. Above 8core 98 LabourChargesfor laying of cable & clamping in structureUpto 8Core 99 LabourCharges forlaying of cable & clamping in structure Above 8core 100 Labour Charges for Erection of cable glands by providing required No. of holes in the gland plate/ panels and Mechanism/ Control cubical, removing the cable sheeths, cutting of armour to the required length and making up the cable with gland and fixing the cable with glands in the required location.19mm 101 LabourCharges for Erection of cable glands by providing required No. of holes in the gland plate/ panels and Mechanism/ Control cubical, removing the cable sheeths, cutting of armour to the required length and making up the cable with gland and fixing the cable with glands in the required location. 25mm 102 LabourCharges for Erection of cable glands by providing required No. of holes in the gland plate/ panels and Mechanism/ Control cubical, removing the cable sheeths, cutting of armour to the required length and making up the cable with gland and fixing the cable with glands in the required location. 28mm 103 Labour Charges forcable core end termination 104 Labour Charges forcable core end termination under ( LC + 20%) 105 Labour Charges for Fixing of all types of MCB, fuse holder and fuse of all range wherever required as directed by the field Engineer. 106 Labour Charges for Fixing of terminal block /disconnected type terminal block as required and directed by the field Engineer 107 Labour Charges for Painting of structures after proper surface preparation using appropraite machinery to remove rust/ scales etc., One primary coat of Red oxide painting of various strutures. 108 Labour Charges for Painting of structures after proper surface preparation using appropraite machinery to remove rust/ scales etc., Two coat of Aluminium paint of various strutures. 109 Labour Charges for One coat enamal painting/Anti corrasive Painting of Chequrred plates, Equipment board, indentification of earth pit board and yard light pole, structure earthing, earth mat, earth pit, shoe paint and Iron and steel items as directed by the field engineer. 110 Labour Charges for Erection of LC/ Key boardas directed by the field Engineer includingcost of all materials. 111 Labour charges for writing details in Finished Surface boards including cost of enamel paint (Dulex, Asian, Berger preferred) and other Consumables as directed by the field Engineer. 112 Labour charges for drawing layout and writing details/ Vinyl Printing in LC/ Key board including cost of enamel paint (Dulex, Asian, Berger preferred) and Other consumables as directed by the field Engineer. 113 Labour Charges for Fixing of PVC Stickers for Breakers, Panels, chargers and General key Boardsand other works etc., as required anddirected by field Engineer, 114 Labour charges for the loading/unloading/shifting of Department materials at stores or site by the Contractor without using Boards crane for one operation. 110 KV Isolators Non-Fragile Materials 115 Labour charges for the loading/unloading/shifting of Department materials at stores or site by the Contractor without using Boards crane for one operation. 11 KV Isolators Non-Fragile Materials 116 Cables/Conductors including cutting and rewinding Non-Fragile Materials 117 Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor without using Boards crane for one operation. Busbars (Non-Fragile Materials) 118 Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor without using Boards crane for one operation 110 KV Breaker (Fragile Materials) 119 Labourchargesfor the loading/unloading/shifting of Department materials at stores or site by the Contractor without using Boards crane for one operation 11 KV Breaker (Fragile Materials) 120 Labourcharges for theloading/unloading/shifting of Department materials at stores or site by the Contractor without using Boards crane for one operation 110 KV MaterialsCT/PT/LAS/Others(Fragile Materials) 121 Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor without using Boards crane for one operation 110 KV Insulators (Fragile Materials) 122 Labour chargesfor the loading/unloading/shifting of Department materials at stores or site by the Contractor without using Boards crane for one operation 11 kv CT/PT/LAS/ and others(Fragile Materials) 123 Labourcharges for the loading/unloading/shifting of Department materials at stores or site by the Contractor without using Boards crane for one operation 11 KV insulators (PT/Disc) (Fragile Materials) 124 Conveyance charges for transporting by road in plains iron & steels (20 Km from Coimbatore) Under contractor Scope 125 Conveyance charges for transporting by road in plains equipments ,panel & insulators ( from Karamadai Stores 25 Km) Under Contractor Scope 126 Sudries for supply and fixing of electrical items such asTNC/ selector switch/ push button/ indication lamps etc where ever requried as per direction of field engineer 127 Earth work excavation for foundation in HGS and and depositing on bank with initial lead of 10 m and initial lift of 2 m in Hard stiff clay Stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders including cost of all lead lift labour charges etc complete 128 Earth work excavating for foundation and depositing on bank with initial lead of 10m and initial lift of 2 m in soft disintegrated rock, laterite, soft rock (or) kankar not requiring blastingincluding cost of all lead lift labour charges etc complete 129 Plain cement concrete in CC 1:3 :6 using 20mm HBG metal with out form work, including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete. 130 Reinforced cement concrete in C.C. 1:1 ½ :3 mix for matt concrete with out shuttering including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete. 131 Plain cement concrete in CC 1:2 :4 using 20mm HBG metal with out form work, including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete. 132 Providing steel reinforcement MS/RTS rod including cost ofall materials, labour charges including cutting bending all leads, lifts, as per standard specification etc., complete. 133 Providing Form work for plinth between ground leveland plinth top including cost ofall materials, labour charges all leads, lifts, as per standard specification etc., complete. 134 Brick work in C.M. 1:5 using chamber burnt class II bricks,for Basement & superstructure including, cost of cement, all materials, labour, curing, all leads and lifts, etc complete as per Standard Specification. 135 Supplying and fabrication of template and Labour charge for fixing template in correct level and alignment etc complete 136 Suppling and Fixing ofgrouting bolt 20 mm dia bolt and nutincluding cost ofall materials, labour, curing,leads and lifts etc., complete. 137 Plastering with CM 1:3, 12 mm thick for Ceiling & Sunshade bottom including cost of cement, all materials, labour, curing,leads and lifts etc., complete. 138 colour washing with two coats using cement paintover one coat of white cemnet including through scrapping, clan removal of dirt, cost of all materials, labour, Lead, Lift etc., complete 139 Disposal of Excess of surplus earth awayin low lying area with a lead of 100 Mts includingspreading and levelling labour,lead, lift as per standard specification, etc., complete. 140 SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only 141 CGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only 142 Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as 0 only
