Tender For General Mill Store Items, rohtak-Haryana

Tender For General Mill Store Items-- 1 S. S. 304 split pin size 5/25, as per sample, Good quality 2 Ring type rubber bush for travelling grate drive coupling, as per sample, Good quality 3 M. S. washer I.D 17mm , OD 30 mm, thik- 3mm, as per sample, Good quality 4 Cotton waste, Good quality 5 Turk head wire bush O.D- 55mm, heavy duty 6 Hexa blade high speed 7 Cutting wheel AG-4 8 Grinding wheel AG-4 9 Buffing wheel AG-4 10 Emery cloth rough, Carborundum 11 Stream hose-1W size- 1” (25mm), tube- Black EPDM reinforcement: double wire braded high tensile steel wire, cover black EPDM, make- Indomabsson 12 Rustolene (500ml) pack, Good quality 13 Wire brush, Good quality 14 Paint brush 4”, Good quality 15 Paint brush 2”, Good quality 16 Old dhoti 4mtr, Good quality 17 Teflon tape 18 M-Seal 19 White lead 20 Red lead 21 Soldering flues 22 Soldering paste 23 Copper rivet 5x25mm 24 Old dhoti 25 S. S. sim (0.05 to 0.5mm), make- SKF 26 Taflon hammer 27 Star coupling (L-190) Rubber 28 Engine oil for actuator 20W40, make- Castrol/Servo 29 Rustolene 30 Brasso 500ml 31 Annabond 666 32 Asbeston flat temp: 1000ºC 3 Rol (30 mtr each) 33 D.p. test kit 96, make- Checkmate 34 D.P. test kit 97, make- Checkmate 35 D.P. test kit 98, make- Checkmate 36 Lead wire 0.5mm 37 WD-40 38 Cold galanizing sprey, make- Molykote 39 Metallic joint sheet thicknes 1/32” , make- Uniklinger 40 M. S. washer ¼” 41 M. S. washer 3/8” 42 M. S. washer 1/2” 43 M. S. washer 5/8” 44 M. S. washer 3/4” 45 M. S. washer 1” 46 M. S. bolt with nut 7/8” x 5” 47 M. S. nut only ¾” 48 M. S. bolt with nut ¾”x 2” 49 M. S. bolt with nut ¾” x 4” 50 M. S. bolt with nut ¾” x 6” 51 H. T. bolt with nut size ¾” x 4” 52 H. T. bolt with nut size 7/8” x 4” 53 Bolt with nut 5/16” x 8” 54 S. s. bolt with nut ½” x 6” 55 S. S. bolt with nut 7/8” x 10” 56 M. S. nut with bolt ¼” x 1” 57 M.S nut with bolt ¼”x 1½” 58 M. S. nut with bolt ¼” x 2½” 59 M. S. bolt with nut ¼” x 3’ 60 M. S. bolt with nut ¼” x 4’ 61 M. S. bolt with nut ¼” x 2’ 62 Emery paper fine 63 M. S. bolt with nut 5/16” x 2” 64 M. S. bolt with nut 5/16” x 2½” 65 M. S. bolt with nut 3/8” x 1”

INR 100 /-

Refer document

Refer document