Providing, Supplying And Placing Furnishing Items For 1 Nos. Family Courts In Tehsil Complex Building, At Derabassi, Distt. Sas Nagar. Providing, Supplying And Placing Furnishing Items For 1 Nos. Family Courts In Tehsil Complex Building, At Derabassi, Distt. Sas Nagar.-Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather.Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D)BACK SIZE : 47.5 cm. (W) x 77 cm. (D)ARMRESTS: The armrest top should be moulded from polyurethane(PU), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps.ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism should be designed with the following features:• 360° revolving type.• Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort.• Tilt tension adjustment can be operated in seating position.• 5-position Tilt limiter giving option of variable tilt angle to the chair.• Seat/back tilting ratio of 1: 2• The mechanism housing should be made up of HPDC Aluminium black powder coated.SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm.ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need.PNEUMATIC HT. ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm.PEDESTAL ASSEMBLY The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.)TWIN WHEEL CASTORS:The twin wheel castors should be injection moulded in Black Polypropylene. Overall Dimensions of ChairSeat Height -44.5 to 54.5 cm.Height -114.0-131.5 cm.Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-76.1 cm as approved by engineer in-charge/employer 3 Storwel Plain with four Shelf (1981H x 916W x 486D) Storwel plain shall have an overall size of 916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available as approved by engineer in-charge/employer 4 4 Door Book Case (1742 H x 914W x 320 D) 4 Door Book Case shall have the configuration of 914mm(W)x320mm(D)x1742mm(H). The unique design provides the right rigidity to the Top hinged doors , which shall facilitate easy use. The Book Case shall be made from prime quality CRCA steel with anti rusting treatment. It shall have a Rigid Knock Down Construction. The Top Pannel, Back Pannel and Side Pannel are made from 0.7mm high yield CRCA and other components from 0.8mm CRCA. Each door shall have a 6 Lever Cam Lock with Common Key. 3mm thick glass should be used in each door for clear inside vision whih shall be secured in a metal frame through a rubber gasket. Scissor Mechanism should be provided in each door for receding inside the top of every compartment and it shall ensure parallel and smooth movement. Each door should be provided with plastic side end caps as handle which is easy to grip. Each compartment shall have a storage shelf with a UDL capacity of max 80 Kg. The 2 Door Book Case shall have 18mm PLB Top straight edge with PVC lipping. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10) as approved by engineer in-charge/employer 5 PLU MAIN 2 DR CAM LOCK(1950 H x 375 W x 470 D) Product Size - 375(W) x 470(D) x 1950*(H) *Height including leveler Height of leveler is 50mm and adjustment possible is 15mm.Construction & Material - Aesthetically appealing completely knock down construction.The add-on units are stack widthwise to form a row of Lockers. (Note- Single Main unit should not be offered. Minimum 1Main + 1Addon to be offered, Maximum 1Main + 4Addon to be offered) Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA D Grade as per IS-513 - CRCA D Grade as per IS-513 as approved by engineer in-charge/employer 6 Premium Mid Back Chair.SEAT SIZE 49.0 cm. (W) x 44.0 cm. (D) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45 ±2 kg/m3/ and hardness load 16 ± 2 kgf for 25% compression. 3. ARMRESTS :The one-piece armrests made of black integral skin polyurethane with 50-70 Shore ‘A’ Hardness and reinforced with M.S. insert. The armrests should be scratch and weather resistant. The armrests should be fitted to the seat with seat/armrest connecting strip assembly made of 0.5 ± 0.05 cm. thk. HR steel. 4.CENTER TILT mechanism(for PCH-7001/2): The mechanism should be designed with the following features: • 360° revolving type. • 17°±2° maximum tilt on pivot at center • Upright position locking. • Tilt tension adjustment. 5. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. 6. TELESCOPIC BELLOW ASSEMBLY: The bellow should be 3 piece telescopic type and injection moulded in black Polypropylene. 7. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm.(76.3 ±1.0 cm with castors). 8. TWIN WHEEL CASTORS:The twin wheel castors should be injection moulded in Black Nylon as approved by engineer in-charge/employer 7 Retiring room 8 Office wooden executive table size 6 ’*3.5 ’*2.5 ’ with the provision of three drawers and tea tray on right side and computer unit on left side with keyboard and one cupboard, frame made of 19 mmcommercial board except top of M.D.F. board, teak wood mouldings and beedings and Sunmica of best quality all over pasted, front closed, sprit polished, Supports of hard wood as approved by engineer in-charge/employer 9 Wooden Visitor Chair, frame made of 45mm x 30mm x-section of Teak wood, internal frame of cushioned seat and back made of cheel wood provided with 2” thick P.U. cushion in seat, 2” thick foam cushion in back, covered with tapestry using allied material necessary in cushioning process, spirit polished as approved by engineer in-charge/employer 10 Sofa Set three seats internal frame made of cheel wood, seat and back cushioned covered with superior quality leatherite arms of teak wood rest of the structure covered type as approved by engineer in-charge/employer 11 Center Table size 48”x30”x with top, bottom shelf and side pillars made of teak ply pressed ¾” board with teak wood mouldings, transparent glass 12mm thick as approved by engineer in-charge/employer 12 Side Table of size 18” x 18” frame made of teak wood top of glass duly polished as approved by engineer in-charge/employer 13 Table glass size 2’*1.5’ made of 12mm ply/3/4” board pasted with teak ply, melamine polished as approved by engineer in-charge/employer 14 Peshi room 15 Office steel executive table size 4’*2.5’*2.5’, with three drawers,frame made of 1” sq. pipe of 16 gauge, front open, provided with three drawers, top made of ¾” commercial board with 1mm sunmica with half round teakwood mouldings sprit polished, frame enamel spray painted as approved by engineer in-charge/employer 16 Visitor chair frame made of 1” round pipe in “ S” shape chrom plated, seat and back cushioned covered with leatherite as approved by engineer in-charge/employer 17 Revolving chair with 1” pipe chormplated with seat and back cushioned covered with leatherite, base with wheels hydraulic height adjustment as approved by engineer in-charge/employer 18 Waiting area 19 Three Seater Bench with perforated sheet on seat and back, M.S. base chromplated in multicolour, provided with adjusters at base, with arms and both ends as approved by engineer in-charge/employer 20 Steno room 21 Computer table size 4’*2’*2.5’ made of ¾” commercial board pasted with sunmica teakwood beedingwith the provision of keyboard, mouse tray spirit polished as approved by engineer in-charge/employer 22 Court room 23 Office Table of size: 6x4x2.5 with both side drawer in cupboard,all frame made of 3/4 Anti termite water proof resistant board, pressed with sunmica with provision of drawersbox, bottom shelf with footrest, teak wood mouldings and beedings on the edges, spirit polished as approved by engineer in-charge/employer 24 wooden vistor chair,frame made of seasoned teak wood back with 2 nos stripes, seat with nylon cane,spirit polish as approved by engineer in-charge/employer 25 Office wooden executive table4’*2.’*2.5’ with three drawers only,frame made of 19 mm Commercial except top of M.D.F. board, teak wood beedings and mouldings, supports of hardwood, with sunmica as approved by engineer in-charge/employer 26 Library stool of size 27”*15”*12”, frame made of 1” sq. pipe with top of sunmica with side teakwood beeding sprit polished(Peon stool) as approved by engineer in-charge/employer 27 Close type Notice Board hinged at one end, made of Aluminum beeding enclosing display board with blazer and back support of GI/Sunmica sheet, lockable of size4x2 as approved by engineer in-charge/employer 28 Revolving computer chair with PU arms seat and back with superior moulded cushions covered with cloth, provided with wheels at the base, painted (Bar chair) as approved by engineer in-charge/employer
