Tender For Maintenance Of Water Supply (Two Years Annual Repairing Of Bowl Assly And Tube Shaft Set Of Network-50, 50B, 51, 76, 77 And Village-Hoshiyarpur), Noida. - S/F Line Shaft 3.0 M X 25 Mm. (Nsi-3.5.05) 2 S/F Line Shaft 1.5 M X 25 Mm. (Nsi-3.5.06), noida-Uttar Pradesh

Maintenance of Water Supply (Two Years Annual Repairing Of Bowl Assly And Tube Shaft Set Of Network-50, 50B, 51, 76, 77 And Village-Hoshiyarpur), Noida. - S/F Line Shaft 3.0 m x 25 mm. (NSI-3.5.05) 2 S/F Line Shaft 1.5 m x 25 mm. (NSI-3.5.06) 3 S/F Top Shaft 2.20m. Long 25mm with chuck nut. (NSI-3.5.07) 4 S/F Oil Tube heavy C class 1.5 m x 40 mm (NSI-3.5.08) 5 S/F Top Tube 40mm. Size (NSI-3.5.09) 6 S/F Line Shaft Bearing 40mm x 25mm (NSI-3.5.10) 7 S/F Rubber Spider 150 x 40mm (NSI-3.5.11) 8 S/F Rubber Spider 100 x 40mm (AOR) 9 S/F Line Shaft Coupling 25 mm (NSI-3.5.14) 10 S/F Oil Nut G.M. (NSI-3.5.12) 11 S/F T.T. Nut G.M. (NSI-3.5.13) 12 S/F Rubber Packing 150 mm. Dia. (NSI-3.5.16) 13 S/F Rubber Packing 100 mm. Dia. (AOR) 14 S/F Nut & Bolts 2.5x4 (NSI-3.5.15) 15 S/F Discharge head size 150mm x 150mm with T.T. Plate suitable for 40 H.P. Motor (NSI-3.5.01) 16 S/F Head Flange 150 mm dia. (NSI-3.5.04) 17 S/F Head Flange 150x100 mm dia. (AOR) 18 S/F Oil Lubrication Tank with bracket. (NSI-3.5.02) 19 S/F Side Feed Valve with screwed C.I. (NSI-3.5.03) 20 S/F Column Pipe heavy C class 3.0 m.x150mm. Dia 7.1 mm thickness withwelded flange & suitable ribs at both ends male & female. (NSI-3.5.17) 21 S/F Column Pipe heavy C class 1.50 m.x150mm. Dia 7.1 mm thickness with welded flange & suitable ribs at one end socket at other end. (NSI-3.5.18) 22 S/F Column Pipe heavy C class 3.0 m.x100mm. Dia heavy C Class with M. S. Flange at both ends dully welded with four nos. ribs. (AOR) 23 S/F Column Pipe heavy C class 1.50 m.x100mm. Dia heavy C Class with M. S. Flange at both ends dully welded with four nos. ribs. (AOR) 24 S/F Centrifugal VT Pump Bowl Assly 10 stage for 1000 LPH discharge at 45 mtr. Head of 100mmx40mmx25mm size. (AOR) 25 S/F V.T. Pump Bowl Assembly 6 stages having Bronze impellers and SS Shaft of 150x25 mm Suitable for 1600 LPM discharge at 80m. head oil lubricated type as per ISS 1710. (NSI-3.6.15) 26 P/F Sluice Valve shall generally conform to IS 14846 with latest amendment, with length over flanged as per PD of IS 14846 corresponding to BS EN-558/ISO 5752 Basic series 3 in CI construction having metal seating (IS 318 Gr. LTB 2). With comple component & material of construction following below:-1 - Body/Door/Dome-Cast Iron IS 210 Gr. FC 2602 - Spindle-Non rising: Stainless Steel AISI 4103 - Body seat/Door face-Gun metal : IS 318 Gr. LTB 2 (rings to be press fitted and riveted: no screws allowed)4 - Rivets-Soft annealed brass5 - Spindle Nut-Gun metal : IS 318 Gr. LTB 26 - Stem Seal-Greased Hemp7 - Fasteners-Carbon steel8 - Flange Drilling - IS 1538 Table 4 & 69 - PN 1.010 - Accessories (400 mm and above)-Ball thrust bearings to be housed above the wet chamber ie. above the gland. Enclosed Spur Gear Box for ease of operation. Air Plug11 - Painting/Coating - Inside & Outside epoxy liquid coated, DFT minimum 250 micron, shade RAL 5005/5015 (BLUE)12 - Hydro-test-(Open Ended only) (Seat : 10/16 Kg/cm2; Body: 15/24 Kg/cm213 - Upto 600mm dia Mannual Operated & above 600mm Gear box (Make-IVC/Kirloskar) (NSI-1.10) 27 150 mm. diaKirlosker Make 28 P/F Reflex Valve 150mm dia shall conform to IS 5312 Part-1 & above to IS 5312 Part-2 with latest amendment, Valves shall be in graded CI with metal to metal (IS 318 Gr. LTB 2) seating, preferably slanted (and not perpendicular) vis-a-vis horizontal axis; SS AISI 410 stub pins & slant seat design. with comple component & material of construction following below:-1 - Body/Door/Dome-Cast Iron IS 210 Gr. FC 2602 - Hinge pin (single door)/Stub pin (multidoor type)-SS AISI 4103 - Seat & Face rings-Gun metal : IS 318 Gr. LTB 2 4 - Rivets-Soft annealed brass5 - Fasteners-Carbon steel6 - Flange Drilling-IS 1538 Table 4 & 67 - PN 1.08 - By-pass arrangement-Optional9 - Painting/Coating-Inside & Outside epoxy liquid coated, DFT minimum 250 micron, shade RAL 5005/5015 (BLUE)10 - Hydro-test Seat : Seat : 10/16 Kg/cm2; Body: 15/24 Kg/cm2Make-IVC/Kirloskar) (NSI-1.11.02) 29 Supply & Fixing Flat Cable 10 Sqmm. x 3 Core Finolex make. (AOR) 30 S/F Neck Ring GM (NSI-3.6.00) 31 S/F Bowl Bush GM (NSI-3.6.01) 32 S/F Suction & Discharge Bush (NSI-3.6.03) 33 S/F Discharge Case Screw Bush (NSI-3.6.04) 34 S/F Lock Collect MS (NSI-3.6.05) 35 S/F Tubing adoter with bush (NSI-3.6.06) 36 S/F Impeller C.I. (NSI-3.6.08) 37 S/F Pump Shaft S.S. (NSI-3.6.07) 38 S/F Inter Bowl (NSI-3.6.09) 39 S/F Suction Bowl (NSI-3.6.10) 40 S/F Discharge Bowl (NSI-3.6.11) 41 S/F Nut & Bolt (Bowl Stud) (NSI-3.6.12) 42 M/c Inter Bowl (NSI-3.6.13) 43 M/c Impeller (NSI-3.6.14) 44 Dismentling old material made of MS/CI/DI/GI as an where bassis which is unservicable condition i/c all labour, machinery, loading, cartage & disposal of the same item such as old pumping plant, pipes, jall, valves & all others fittings & fixture. The payment from the made against the aforesaid material shall be deducted from the bill of contractor and all unservicable material shall be issued free of cost to the contractor (Material shall be weighted at dharamkanta in presence of concern engineer and weight slip shall be provided by the contractor). (NSI-4.9.00)

INR 2832 /-

INR 172500.0 /-

Refer document