Tender For Electric High Light Installation Work Near Vikas Khand Zamania Gram Panchayat Dadni Chatti - Supply And Fixing Of 12.50 Mtr High Mast Shaft Of Approved Make With Rising System Hot Dip Glavanized Inside & Out Side Dip, Heaving Pole Sheet Thickne, zamania-Uttar Pradesh

Tender For Electric high light installation work near Vikas Khand Zamania Gram Panchayat Dadni Chatti - Supply and fixing of 12.50 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip, heaving pole sheet thickness 3mm. Top dia minimum 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for High Mast such as head frame suitable for 6 to 12 Iuminaries & its control gear boxes 0.75 HP power tool motor, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing / site reuiment along with foundation bolts nuts, washers, anchor plates etc complete all respect. As per SI No 651 2 Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 watt. Confirming to IP 66 protection complete in all respect. As per SI No 1455 AAA 3 Supply and fixing16sq mm 2 core PVC of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt brickson sides and on top. i/c allAs per SI No 501 C 4 Supply and burring of safe Earthing Electrode T-19 (Hot Dip galvanized) i/c all As per SI 725 A 5 Supply and wiring 4 Sqmmof submain with two number PVC insulated 1100V grade complete Item No 211 C 6 Supply and fixing following 40 A SPNcapacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contractors As per SI No 807 (f)ii 7 E/w in excavation in foundation in ordinary soil As per S.I. No. 251 8 Concrete with 40 mm gauge brick ballast , Coarse sand of 1.25 FM & cement in proportion 12:6:1including supply of all materials labour and T & Petc required for completion of work as SI No.273 9 R.C.C work with cement approved coarse sand and 2 cm. Gauge approved dalla grit proportion of 1:2:4 in suitablefoundation forHigh Mast pole as per S.I no.283 10 Mild steel iron in plain work such as in reinforced concrete or rein force brick work wrought to required shape as necessary cutting. bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised overlapping shall be measured required to proper completion of the work S.I.No. 504 11 Supply of SignBoard or Lokarpan stone at site

INR 667 /-

INR 12880.0 /-

INR 6.44 Lakhs /-