|
| 1 | Supplying all materials, labours, tools & tackles for taking out 7.5 H.P submersible Motor Pump from sewage sump all complete jobs. |
| 2 | Repairing of 7.5 H.P submersible Motor Pump & their rewinding with original copper wire 19 Nos. and 4 Nos. bearing guage with labour materials such as copper wire varnish as per requirement with their heating after reassembling with testing on full load at site all complete job. |
| 3 | Supplying & fitting contactor ML-1.5, 415 Volts, 25 Amp, for 7.5 H.P panel board all complete. |
| 4 | Supplying & fitting Volt meter 0 to 500 V make AE for 7.5 H.P panel board all complete. |
| 5 | Supplying & fitting over load relay (9-14) range for 7.5 H.P Starter L&T make (ML type) al complete. |
| 6 | Carriage of 7.5 H.P Motor Pump from site (Hotwar) to work shop (Ashok Nagar) and carriage the same after due repairing from work shop to site (Hotwar) all Complete |
| 7 | Providing all labours, tools and equipment by tripod stand chain pully blocks for lowering fo 7.5 H.P submersible motor pumps from sewage sump all complete job. |
| 8 | Providing all labours tools and technicians for opening and dismantling of 25 H.P centrifugal motor pump taken out its motor from stator cutting out burnt and damaged coil cleaning and repairing for slots all complete as per specification and direction of E/I. |
| 9 | Cost toward repairing and full rewinding of 25 H.P squirrel cage Induction motor with supplying suitable size supper enameled copper winding wire (Approx-18 kg.) including wooden stick, crap paper, cotton tape, empire tape, Dr. back vanish abc. and doing rewinding mailing coil and inserting coil and making connection phase to phase and coil to coil heating, varnishing etc. all complete (rate gdvar, after taken out scrap materials). |
| 10 | 25 H.P Motor complete opening and its damaged ball bearing SKF-6309 by replacing new and reassembly fitting and testing etc. all complete. |
| 11 | Supplying of ISI marked contractor for 25 H.P Motor stator L&T make all complete. |
| 12 | Dismantling of 25 H.P BE pump from disc plate after disconnection of outlet and inlet pipe line disconnect for repair, carriage from pump house and back with loading and unloading all complete job. |
| 13 | Replacement and repair of old and damaged spare part as per need:-a. Impelar shaft as per sample all complete jobs. (For Pump No.-1) |
| 14 | b. Gun metal check nut- |
| 15 | c. Gun Metal Distance kit bush- |
| 16 | d. Supplying fitting ball bearing SKF make 6303 and 6307 2 type one no. each at both ends. |
| 17 | e. Supply fitting and fixing carbon steel key. |
| 18 | f. Couplingbolt & nut with rubber bush- |
| 19 | g. Bearing housing rematling by bush welding making bearing size etc. |
| 20 | h. Making supplying fitting gland packers pocket type with pusher push. |
| 21 | Providing all labours, toots and technicians for opening the 2 H.P Aerator motor all complete as per specification and direction of E/I (for 3 Nos. Motors). |
| 22 | Cost toward repairing and full rewinding of 2 H.P Aerator motor with supplying suitable size super enameled copper winding wire including wooden stick, crap paper, cotton tape, empire tape, Dr. back vanish etc. and doing rewinding mailing coil and inserting coil and making connectionphase to phase and coil to heating, varnishing etc. all complete. (for 3 Nos. Motors) |
| 23 | Supplying and fitting oil seal as per size and sample all complete jobs. (For 12 Nos.Aerator) |
| 24 | Supplying and fitting load gear for 2 H.P Aerator motor all complete as per specification and direction of E/I. (For 03 Nos. Aerator) |
| 25 | Supplyingand fitting gear oil for 2 H.P Aerator motor al complete as per specification and direction of E/I. (for 6 Nos. Aerator) |
| 26 | 2 H.P Aerator Motor complete opening and its damaged ball bearing SKF-30204 by replacing ne and reassembly fitting and testing etc. all complete. (for 3 Nos. Aerator) |
| 27 | Cost of labour charge fordismantling & overhauling and refitting the 2 H.PAerator and refitting at site with testing. (For 3 Nos. Aerator) |
| 28 | Supplying fitting TPN, MCB 25 Amp. 2 Nos. 415 Volt for 2 H.P Aerator motor starter with testing at site all complete job.(For 2 Nos. Aerator) |
| 29 | Supplying fitting contactor ML 1.5-415 volt 25 Amp. For 2 H.P Aerator motor all complete job.(For 3 Nos. Aerator) |
| 30 | Supplying fitting over load relay range 4-6 ML type for 2 H.P Aerator motor with testing at full load all complete job. |
| 31 | Supplying & fitting of 85 watt CFL bulb+Holder make Philips. |
| 32 | Supplying fitting, threading & making for 150mm spindle &gutka (complete set) OD 27mm coupler OD 55mm and long 520mm with as per sample check nut (GM) all complete as per specification and direction of E/I. |
| 33 | Providing labours, toots and equipments with tripod chain pully block etc. at work site for taking out 5 H.P submersible motor pump set with 500mm dia G.I pipe 180’ water proof electrical cable from high yield drilled Tubewell etc. all complete job as per direction of E/I.BMCJ Hotwar Tower No.-1 No.BMCJ Hotwar Near Bhansas 1 No. |
| 34 | Supplying fitting & fixing 3 phase 5 H.P starter for 5 H.P submersible/self priming motor of approved quality (HPL/Heavels) of equivalent make latest quality) all complete job as per direction ao E/I.BMCJ Hotwar Tower No.- 1 No.BMCJ Hotwar Near Bhansa 1 No. |
| 35 | Carriage of 5 H.P motor pump from site (Hotwar Jail) to work shop (Ashok Nagar) and carriage the same after due repairing from workshop to site all complete job. |
| 36 | Supplying and replacement of column pipe suitable for 5H.P ,1.5H.P and 1H.P, submersible motor pump set with 50/32mm dia PVC Sch.-80 pipe all complete job as per direction of E/I.50mm dia column pipe |
| 37 | 32mm dia column pipe |
| 38 | Supplying & commissioning of submersible pump set of reputed KSB/Texmo make ISI, ISO – 9001-2000 marked or having ISO 9001-2000 submersible motor pump forwith all complete job as per specification and direction of E/I.1.5 HP submersible motor pump –(only) |
| 39 | 5 HP submersible motor pump –(only) |
| 40 | Repair and maintenace of IM-II Hand Pump 39Nos. (Use in spare parts) |
| 41 | 32mm dia G.I. pipe |
| 42 | Connecting rod (6m long) |
| 43 | Head assembly |
| 44 | water tank(GI) |
| 45 | CI Cylinder IM-II |
| 46 | Chain with coupling |
| 47 | Handle Axle |
| 48 | Ball Bearing 6204Z |
| 49 | Haxagonal bolt |
| 50 | Haxagonal nut |
| 51 | HT Bolt |
| 52 | Nyloc Nut |
| 53 | Nitral rubber cup washer IM-II |
| 54 | Handle Assembly |
| 55 | upper valve Assembly |
| 56 | Lower valve Assembly |
| 57 | upper valve guide |
| 58 | Supplying of aquafit HYPO chloride granule chemicals for maintenance of sewage treatment plant of Birsa Munda Central Jail. |
| 59 | Supplying all labours, tools and equipment for taking out cracked and damaged PVC Water storage tank form roof. (Taken out material will be the property of BMCJ, Hotwar.a. 1000 Ltrs.- 3 Nos.b. 2000 Ltrs.- 5 Nos. |
| 60 | 8 Nos. |
| 61 | Supplying all materials and tools and equipments& fixing PVC water storage tank double layer ISI marked confirming to IS 12701/1996 approved make fixing on the roof of the building, including cutting 4 Nos. hole in tank for rising, overflow, delivery and wash out including supplying full threaded nipple with Jam nut socket and making connection and supplying fitting. Fixing G.M ball cock as per specification and direction of E/I. |
| 62 | a. 1000 Ltrs |
| 63 | b. 2000 Ltrs |
| 64 | Providing all materials and equipmentand wash out and cleaning of PVC water storage tank including rubbing the wall ao tank by the help of coconut rushi and bleaching powder their washing by clean water all complete as per direction of E/I.a. 250 Ltrs. |
| 65 | b. 500 Ltrs |
| 66 | c. 1000 Ltrs |
| 67 | d. 2000 Ltrs |
| 68 | e. 5000 Ltrs |
| 69 | Supplying all materials tools equipmentsand fixing of PVC water storage tank cover with locking arrangement all complete.a. 1000 Ltrs. -20 Nos.b. 2000 Ltrs. - 20 Nos.c. 5000 Ltrs. - 02 Nos. 42 Nos. |
| 70 | Supplying all materials and labours for fitting and fixing following ball cock brass ball coak of approved make all complete as per specification and direction of E/I.a. 25mm dia |
| 71 | b. 32 mm dia |
| 72 | Providing and fixing UPVC full way valve of approved quality all complete as per specification and direction of E/I.a. 25mm dia |
| 73 | b. 32 mm dia |
| 74 | c. 40 mm dia |
| 75 | Supplying all materials labours tools and equipments for laying in wall of supreme life line e- P.V.C. S.D.R. 11 pipes with solvent cement on wall floor including supplying and fitting of wall hooks or pipe dam cutting pipe to size where necessary etc. all complete as per specification and direction of the E/I (Pipe to be supplied by Contractor)a. Wall and Ceiling:-20 mm dia |
| 76 | 25 mm dia |
| 77 | 32 mm dia |
| 78 | 40 mm dia |
| 79 | b. Roll Pipe- 25mm dia |
| 80 | Making long screw in G.I pipe including supplying and fitting jam nut and extra socket etc. all complete as per specification and direction of E/I.25mm dia |
| 81 | Supplying all materials, tools & equipment for fitting and fixing special type chrome plated and U-P.V.C. fittings of approved make all complete as per direction of the E/I. |
| 82 | Elbow |
| 83 | 20 mm dia UPVC |
| 84 | 25mm dia UPVC |
| 85 | 32 mm dia UPVC |
| 86 | 40mm dia UPVC |
| 87 | Tee Plain |
| 88 | 20 mm dia UPVC |
| 89 | 25mm dia UPVC |
| 90 | 32 mm dia UPVC |
| 91 | 40mm dia UPVC |
| 92 | Nipple |
| 93 | 20 mm dia UPVC |
| 94 | 25mm dia UPVC |
| 95 | Union Socket |
| 96 | 20 mm dia |
| 97 | 25 mm dia |
| 98 | UPVC MTA Brass - |
| 99 | 20 mm dia |
| 100 | 25 mm dia |
| 101 | UPVC FTA Brass - |
| 102 | 20 mm dia |
| 103 | 25 mm dia |
| 104 | UPVC Socket plain - |
| 105 | 20 mm dia |
| 106 | 25 mm dia |
| 107 | 32 mm dia |
| 108 | 40 mm dia |
| 109 | Providing and fixing male ended 15mm dia brass bib cock of approved quality (wtnotlessthan350gms) with extra soket all complete. |
| 110 | a. 15mm dia A/S/cock- |
| 111 | b. 15mm dia CP extension short pic. |
| 112 | c. 15mm dia CP bibcock.(long thread) |
| 113 | d. 15mm dia PVC bibcock. |
| 114 | e. Pillar cock (long neck) |
| 115 | f. Cistern ball cock |
| 116 | g. Cistern handle |
| 117 | h. Bibcock spindle |
| 118 | i. Health forcet |
| 119 | j. Commod cover |
| 120 | k. Waste pipe |
| 121 | l. M-seal(100gm) |
| 122 | m. White cement |
| 123 | n. 100mm C.P Jali |
| 124 | o. Flush bend |
| 125 | p. Cistern |
| 126 | q. Hand Basin |
| 127 | Supplying fitting & fixing high vitreous white glazed earthen E.W.C. with “P” trap of parry Hindustan or any other approved I.S.I. make joints spindle stop cock of approved quality weight not less than 450grams 15mm P.V.C. alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic solid state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming, all complete as per specification and direction of E/I. a) IWC-580 x 400 mm size with 12 Litre PVC Low down cistern |
| 128 | b) 400 mm high EWC with 12 Litre PVC Low down cistern |
| 129 | Providing and fixing 15mm dia and 45 C.M long P.V.C connection pipe with heavy quality brass coupling at both ends etc. all complete as per specification and direction of E/I. |
| 130 | Supplying all labour, tools, equipment, operation & handling of W/S scheme including operating the 25HP motor pump & doing W/S in Birsa Munda Central Jail, Hotwar & his residence colony from tower N-1 & N-2 & rectification of plumbing fault in all respect, (only labour charge) |
| 131 | Supplying all labours tools, equipment, operation & handling of S.T.P. including operating of the 7.5 H.P. 3 No. submersible motor pump situated in sewage sump, operating of 2 HP 6 No aerator situated in policy lagoon, operation of 5 HP submersible motor pump situated in bore well screening out of big particles of sewage from grit chamber & their disposal at a suitable distance including rectification of electric fault at STP & W/S center in all respect, (only labour charge) |
| 132 | GST@ 18% |
| 133 | Labour Cess@1% |
