Tender For Supply Of Fitting Block Forged _Cs_ As_Ss For Ag And Ug Piping For Msb, Pfcc, Gds And Ff For Nrep, numaligarh-Assam

Numaligarh Refinery Limited has published Tender For Supply Of Fitting Block Forged _Cs_ As_Ss For Ag And Ug Piping For Msb, Pfcc, Gds And Ff For Nrep. Submission Date for this Tender is 28-04-2025. Pipe and Tube Fittings Tenders in numaligarh Assam. Bidders can get complete Tender details and download the document.

Tender Notice

TDR

48571860

Tendering Authority

Tender Brief

Corrigendum : Tender For Supply Of Fitting Block Forged _Cs_ As_Ss For Ag And Ug Piping For Msb, Pfcc, Gds And Ff For Nrep

Bidding Type

Limitted

Competition Type

Indian

State

Assam

City

Numaligarh

Last Date of Bid Submission

28-04-2025

Tender Documents

Tender Details

Supply Of Fitting Block Forged _Cs_ As_Ss For Ag And Ug Piping For Msb, Pfcc, Gds And Ff For Nrep , Group-1 (Group Wise Evaluation) Supply Of Fittings Block Forged_Stainless Steel For Ag+Ug Pipping For Nerp Project Including Tpi Charges As Specified In Material Requisition. , Elb 90 Deg Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 90 Deg Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 90 Deg Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 90 Deg Ss Dual (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 90 Deg Ss Dual (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 90 Deg Ss Dual (Nace), 3000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03%, For Sour(Nace) Service Req. Acc. To, Nace Mr0103 , Elb 90 Deg Ss Dual (H2 Ser.), 6000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 90 Deg Ss Dual (H2 Ser.), 9000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 90 Deg Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F316/316L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 90 Deg Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F316/316L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 90 Deg Ss, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Elb 90 Deg Ss, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Elb 90 Deg Ss, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Elb 90 Deg Ss (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Elb 90 Deg Ss (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Elb 90 Deg Ss (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Elb 45 Deg Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 45 Deg Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Elb 45 Deg Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Fcpl Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Fcpl Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Fcpl Ss, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Fcpl Ss (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Fcpl Ss (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Rcpl Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Rcpl Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Rcpl Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Rcpl Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Rcpl Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Rcpl Ss Dual (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Rcpl Ss Dual (H2 Ser.), 9000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Rcpl Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F316/316L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Rcpl Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F316/316L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Rcpl Ss (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Cross Ss, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Opposite Ends Shall Be Of Same Size , Cross Ss (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Opposite Ends Shall Be Of Same Size , Cross Ss (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Opposite Ends Shall Be Of Same Size , Tee Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Tee Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Tee Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Tee Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Tee Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Tee Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Tee Ss Dual (Nace), 3000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03%, For Sour(Nace) Service Req. Acc. To, Nace Mr0103 , Tee Ss Dual (H2 Ser.), 9000,0, B16.11, Sw Ends, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Tee Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F316/316L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Tee Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F316/316L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Tee Ss Dual, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F316/316L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Tee Ss, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Tee Ss, 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Tee Ss (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Hcpl Ss Dual, 3000,0, B16.11, Sw End, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Hcpl Ss Dual, 3000,0, B16.11, Sw End, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Hcpl Ss Dual, 3000,0, B16.11, Sw End, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Hcpl Ss Dual, 3000,0, B16.11, Sw End, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Hcpl Ss Dual, 3000,0, B16.11, Sw End, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Hcpl Ss Dual, 3000,0, B16.11, Sw End, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Hcpl Ss Dual, 3000,0, B16.11, Sw End, Forged, A182 Gr.F304/304L, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Shall Be Dual Certified And The, Maximum Carbon Content Shall Be 0.03% , Hcpl Ss, 3000,0, B16.11, Sw End, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Hcpl Ss (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A182 Gr.F321, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Nipple Ss, B36.19M, Mnpt X Bw End,Sch 80S, Seamless, One End Bw, Other End Thrd., Length = 150 Mm, Nipple A312 Gr.Tp321h, Mat. Deliv. Cond. Sch 80S, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A182 Gr.F321h Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Nipple Ss, B36.19M, Mnpt X Bw End,Sch 80S, Seamless, One End Bw, Other End Thrd., Length = 150 Mm, Nipple A312 Gr.Tp321h, Mat. Deliv. Cond. Sch 80S, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A182 Gr.F321h Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Nipple Ss, B36.19M, Mnpt X Pe,Sch 80S, Seamless, One End Plain, Other End Thrd., Length = 150 Mm, Nipple A312 Gr.Tp321, Mat. Deliv. Cond. Sch 80S, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A182 Gr.F321 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Nipple Ss, B36.19M, Mnpt X Pe,Sch 80S, Seamless, One End Plain, Other End Thrd., Length = 150 Mm, Nipple A312 Gr.Tp321, Mat. Deliv. Cond. Sch 80S, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A182 Gr.F321 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Nipple Ss, B36.19M, Mnpt X Pe,Sch 80S, Seamless, One End Plain, Other End Thrd., Length = 150 Mm, Nipple A312 Gr.Tp321, Mat. Deliv. Cond. Sch 80S, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A182 Gr.F321 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Group-2 (Group Wise Evaluation) Supply Of Fittings Block Forged- Alloy Steel For Ag+Ug Pipping For Nerp Project Including Tpi Charges As Specified In Material Requisition. , Elb 90 Deg As (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Elb 90 Deg As (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Elb 90 Deg As (Ibr), 6000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Elb 45 Deg As (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Fcpl As (H2 Ser.), 6000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Fcpl As (Ibr), 6000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Rcpl As (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Tee As (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Tee As (H2 Ser.), 6000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Tee As (Ibr), 6000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Tee As (Ibr), 6000,0, B16.11, Sw Ends, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Hcpl As (H2 Ser.), 3000,0, B16.11, Sw End, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Hcpl As (H2 Ser.), 3000,0, B16.11, Sw End, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Hcpl As (H2 Ser.), 3000,0, B16.11, Sw End, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Hcpl As (H2 Ser.), 3000,0, B16.11, Sw End, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Hcpl As (Ibr), 6000,0, B16.11, Sw End, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Hcpl As (Ibr), 6000,0, B16.11, Sw End, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Hcpl As (Ibr), 6000,0, B16.11, Sw End, Forged, Normalized & Tempered, A182 Gr.F11 Cl.2, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Nipple As, B36.10M, Mnpt X Bw End,Sch 160, Seamless, One End Bw, Other End Thrd., Length = 150 Mm, Nipple A335 Gr.P5, Mat. Deliv. Cond. Sch 160, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A182 Gr.F5 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Nipple As, B36.10M, Mnpt X Bw End,Sch 160, Seamless, One End Bw, Other End Thrd., Length = 150 Mm, Nipple A335 Gr.P5, Mat. Deliv. Cond. Sch 160, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A182 Gr.F5 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Nipple As, B36.10M, Mnpt X Bw End,Sch 160, Seamless, One End Bw, Other End Thrd., Length = 150 Mm, Nipple A335 Gr.P9, Mat. Deliv. Cond. Sch 160, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A182 Gr.F9 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Nipple As, B36.10M, Mnpt X Bw End,Sch 160, Seamless, One End Bw, Other End Thrd., Length = 150 Mm, Nipple A335 Gr.P9, Mat. Deliv. Cond. Sch 160, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A182 Gr.F9 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Nipple As, B36.10M, Mnpt X Bw End,Sch 160, Seamless, One End Bw, Other End Thrd., Length = 150 Mm, Nipple A335 Gr.P9, Mat. Deliv. Cond. Sch 160, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A182 Gr.F9 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Nipple As (H2 Ser.), B36.10M, Mnpt X Pe,Sch Xs, Seamless, One End Plain, Other End Thrd., Length = 150 Mm, Nipple A335 Gr.P11, Mat. Deliv. Cond. Sch Xs, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A182 Gr.F11 Cl.2 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Nipple As (H2 Ser.), B36.10M, Mnpt X Pe,Sch 160, Seamless, One End Plain, Other End Thrd., Length = 150 Mm, Nipple A335 Gr.P11, Mat. Deliv. Cond. Sch 160, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A182 Gr.F11 Cl.2 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Nipple As (H2 Ser.), B36.10M, Mnpt X Pe,Sch Xxs, Seamless, One End Plain, Other End Thrd., Length = 150 Mm, Nipple A335 Gr.P11, Mat. Deliv. Cond. Sch Xxs, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A182 Gr.F11 Cl.2 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 , Nipple As (Ibr), B36.10M, Mnpt X Pe,Sch 160, Seamless, One End Plain, Other End Thrd., Length = 150 Mm, Nipple A335 Gr.P11, Mat. Deliv. Cond. Sch 160, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A182 Gr.F11 Cl.2 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Nipple As (Ibr), B36.10M, Mnpt X Pe,Sch 160, Seamless, One End Plain, Other End Thrd., Length = 150 Mm, Nipple A335 Gr.P11, Mat. Deliv. Cond. Sch 160, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A182 Gr.F11 Cl.2 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005, Ibr Certificate In Form Iiic Required. , Group-3 (Group Wise Evaluation) Supply Of Fittings Block Forged-Carbon Steel-Ltcsfor Ag+Ug Pipping For Nerp Project Including Tpi Charges As Specified In Material Requisition. , Elb 90 Deg Ltcs, 3000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Ltcs, 3000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Ltcs, 6000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Ltcs, 6000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Ltcs, 6000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Ltcs (Nace), 6000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Elb 90 Deg Ltcs, 9000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Ltcs (Nace), 9000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Elb 90 Deg Ltcs (Nace), 9000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Elb 45 Deg Ltcs, 3000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Ltcs, 6000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Ltcs, 6000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Ltcs, 9000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Ltcs, 9000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Ltcs (Nace), 9000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Elb 45 Deg Ltcs (Nace), 9000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Fcpl Ltcs, 6000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Ltcs, 3000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Ltcs, 6000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Cross Ltcs, 9000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Opposite Ends Shall Be Of Same Size , Cross Ltcs, 9000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Opposite Ends Shall Be Of Same Size , Cross Ltcs (Nace), 9000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043, Opposite Ends Shall Be Of Same Size , Cross Ltcs (Nace), 9000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043, Opposite Ends Shall Be Of Same Size , Tee Ltcs, 3000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Ltcs, 3000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Ltcs, 3000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Ltcs, 6000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Ltcs, 9000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Ltcs, 9000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Ltcs, 9000,0, B16.11, Sw Ends, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Ltcs (Nace), 9000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Tee Ltcs (Nace), 9000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Hcpl Ltcs, 3000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 3000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 3000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 3000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 6000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 6000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 6000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 6000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 9000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 9000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 9000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 9000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 9000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 9000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 9000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 9000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 9000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 9000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 9000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 9000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 9000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 9000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs, 9000,0, B16.11, Sw End, Forged, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Ltcs (Nace), 9000,0, B16.11, Sw End, Forged, Servicenace, Category 1, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Hcpl Ltcs (Nace), 9000,0, B16.11, Sw End, Forged, Servicenace, Category 1, A350 Gr.Lf2 Cl.1, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Nipple Ltcs (Amine+Caustic), B36.10M, Mnpt X Bw End,Sch Xs, Seamless, One End Bw, Other End Thrd., Length = 150 Mm, Nipple A333 Gr.6, Mat. Deliv. Cond. Sch Xs, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A350 Gr.Lf2 Cl.1 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Nipple Ltcs (Amine+Caustic), B36.10M, Mnpt X Bw End,Sch 160, Seamless, One End Bw, Other End Thrd., Length = 150 Mm, Nipple A333 Gr.6, Mat. Deliv. Cond. Sch 160, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A350 Gr.Lf2 Cl.1 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Nipple Ltcs, B36.10M, Mnpt X Pe,Sch Xxs, Seamless, One End Plain, Other End Thrd., Length = 150 Mm, Nipple A333 Gr.6, Mat. Deliv. Cond. Sch Xxs, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A350 Gr.Lf2 Cl.1 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Nipple Ltcs, B36.10M, Mnpt X Pe,Sch Xxs, Seamless, One End Plain, Other End Thrd., Length = 150 Mm, Nipple A333 Gr.6, Mat. Deliv. Cond. Sch Xxs, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A350 Gr.Lf2 Cl.1 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Nipple Ltcs (Nace), B36.10M, Mnpt X Pe,Sch Xxs, Seamless, One End Plain, Other End Thrd., Length = 150 Mm, Servicenace, Category 1, Nipple A333 Gr.6, Mat. Deliv. Cond. Sch Xxs, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A350 Gr.Lf2 Cl.1 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Nipple Ltcs (Nace), B36.10M, Mnpt X Pe,Sch Xxs, Seamless, One End Plain, Other End Thrd., Length = 150 Mm, Servicenace, Category 1, Nipple A333 Gr.6, Mat. Deliv. Cond. Sch Xxs, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A350 Gr.Lf2 Cl.1 Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Fcpl Ltcs, 6000,0, B16.11, Threaded Ends,Fnpt, Forged, A350 Gr.Lf2 Cl.1, Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Fcpl Ltcs (Nace), 6000,0, B16.11, Threaded Ends,Fnpt, Forged, Servicenace, Category 1, A350 Gr.Lf2 Cl.1, Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Group-4 (Group Wise Evaluation) Supply Of Fittings Block Forged-Carbon Steel-H2 Ser And Nacefor Ag+Ug Pipping For Nerp Project Including Tpi Charges As Specified In Material Requisition. , Elb 90 Deg Cs (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs (H2 Ser.), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs (Nace+H2), 9000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Elb 90 Deg Cs (Nace+H2), 9000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Elb 45 Deg Cs (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs (Nace+H2), 6000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Elb 45 Deg Cs (Nace+H2), 9000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Fcpl Cs (H2 Ser.), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs (H2 Ser.), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Cross Cs (H2 Ser.), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Opposite Ends Shall Be Of Same Size , Cross Cs (H2 Ser.), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Opposite Ends Shall Be Of Same Size , Tee Cs (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (H2 Ser.), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (H2 Ser.), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Nace+H2), 9000,0, B16.11, Sw Ends, Forged, Servicenace, Category 1, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Hcpl Cs (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (H2 Ser.), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Nipple Cs (H2 Ser.), B36.10M, Mnpt X Pe,Sch Xs, Seamless, One End Plain, Other End Thrd., Length = 150 Mm, Nipple A106 Gr.B, Mat. Deliv. Cond. Sch Xs, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A105n Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Nipple Cs (H2 Ser.), B36.10M, Mnpt X Pe,Sch 160, Seamless, One End Plain, Other End Thrd., Length = 150 Mm, Nipple A106 Gr.B, Mat. Deliv. Cond. Sch 160, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A105n Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Nipple Cs (Nace), B36.10M, Mnpt X Bw End,Sch Xxs, Seamless, One End Bw, Other End Thrd., Length = 150 Mm, Servicenace, Category 1, Nipple A106 Gr.B, Mat. Deliv. Cond. Sch Xxs, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A105n Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Nipple Cs (Nace), B36.10M, Mnpt X Bw End,Sch Xxs, Seamless, One End Bw, Other End Thrd., Length = 150 Mm, Servicenace, Category 1, Nipple A106 Gr.B, Mat. Deliv. Cond. Sch Xxs, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A105n Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, For Sour(Nace) Service Req. Acc. To, Nace Mr0103,Nr-0Zzzz-Pi-Spe-0025 And In-043 , Group-5 (Group Wise Evaluation) Supply Of Fittings Block Forged-Carbon Steel-Ibrfor Ag+Ug Pipping For Nerp Project Including Tpi Charges As Specified In Material Requisition. , Elb 90 Deg Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Elb 90 Deg Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Elb 90 Deg Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Elb 90 Deg Cs (Ibr), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Elb 45 Deg Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Elb 45 Deg Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Elb 45 Deg Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Elb 45 Deg Cs (Ibr), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Rcpl Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Rcpl Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Rcpl Cs (Ibr), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Rcpl Cs (Ibr), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Cross Cs (Ibr), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required., Opposite Ends Shall Be Of Same Size , Tee Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Tee Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Tee Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Tee Cs (Ibr), 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Tee Cs (Ibr), 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Hcpl Cs (Ibr), 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiic Required. , Nipple Cs (Ibr), B36.10M, Mnpt X Pe,Sch Xs, Seamless, One End Plain, Other End Thrd., Length = 150 Mm, Nipple A106 Gr.B, Mat. Deliv. Cond. Sch Xs, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A105n Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiia, Required If Moc Is Of Pipe Else, Form Iiic For Forged Moc , Nipple Cs (Ibr), B36.10M, Mnpt X Pe,Sch 160, Seamless, One End Plain, Other End Thrd., Length = 150 Mm, Nipple A106 Gr.B, Mat. Deliv. Cond. Sch 160, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A105n Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Ibr Certificate In Form Iiia, Required If Moc Is Of Pipe Else, Form Iiic For Forged Moc , Group-6 (Group Wise Evaluation) Supply Of Fittings Block Forged-Carbon Steel-Galvfor Ag+Ug Pipping For Nerp Project Including Tpi Charges As Specified In Material Requisition. , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 3000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.)&Ext. Coated, 3000,0, B16.11, Threaded End,Fnpt, Forged, Inside Galvanised, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Externally Fbe Coating Acc. To, Doc. Nr-0Zzzz-Cv-Spe-0015 , Hcpl Cs (Galv.)&Ext. Coated, 3000,0, B16.11, Threaded End,Fnpt, Forged, Inside Galvanised, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Externally Fbe Coating Acc. To, Doc. Nr-0Zzzz-Cv-Spe-0015 , Hcpl Cs (Galv.)&Ext. Coated, 3000,0, B16.11, Threaded End,Fnpt, Forged, Inside Galvanised, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Externally Fbe Coating Acc. To, Doc. Nr-0Zzzz-Cv-Spe-0015 , Hcpl Cs (Galv.)&Ext. Coated, 3000,0, B16.11, Threaded End,Fnpt, Forged, Inside Galvanised, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Externally Fbe Coating Acc. To, Doc. Nr-0Zzzz-Cv-Spe-0015 , Hcpl Cs (Galv.)&Ext. Coated, 3000,0, B16.11, Threaded End,Fnpt, Forged, Inside Galvanised, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Externally Fbe Coating Acc. To, Doc. Nr-0Zzzz-Cv-Spe-0015 , Hcpl Cs (Galv.), 6000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 6000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 6000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 6000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs (Galv.), 6000,0, B16.11, Threaded End,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs (Galv)&Ext. Coat, 3000,0, B16.11, Threaded Ends,Fnpt, Forged, Inside Galvanised, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Externally Fbe Coating Acc. To, Doc. Nr-0Zzzz-Cv-Spe-0015 , Elb 90 Deg Cs (Galv)&Ext. Coat, 3000,0, B16.11, Threaded Ends,Fnpt, Forged, Inside Galvanised, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Externally Fbe Coating Acc. To, Doc. Nr-0Zzzz-Cv-Spe-0015 , Elb 90 Deg Cs (Galv.), 6000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs (Galv.), 6000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs (Galv)&Ext. Coat, 3000,0, B16.11, Threaded Ends,Fnpt, Forged, Inside Galvanised, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Externally Fbe Coating Acc. To, Doc. Nr-0Zzzz-Cv-Spe-0015 , Elb 45 Deg Cs (Galv)&Ext. Coat, 3000,0, B16.11, Threaded Ends,Fnpt, Forged, Inside Galvanised, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Externally Fbe Coating Acc. To, Doc. Nr-0Zzzz-Cv-Spe-0015 , Elb 45 Deg Cs (Galv.), 6000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs (Galv.), 6000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Fcpl Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 3000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 6000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 6000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs (Galv.), 6000,0, B16.11, Threaded Ends,Fnpt, Forged, A105n (Galv.), Supp. Requirements, For Size <=1 1/2 , Taper Internal Threads, As Per Asme/Ansi B1.20.1, For Size 2 To 6,Taper Internal Threads, As Per Is554, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Group-7 (Group Wise Evaluation) Supply Of Fittings Block Forged-Carbon Steel-Elb,Fcpl,Rcpl,Cross,Tee,Hpcl,Nipplefor Ag+Ug Pipping For Nerp Project Including Tpi Charges As Specified In Material Requisition. , Elb 90 Deg Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 90 Deg Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Elb 45 Deg Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Fcpl Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Rcpl Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Cross Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Opposite Ends Shall Be Of Same Size , Cross Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Opposite Ends Shall Be Of Same Size , Cross Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Opposite Ends Shall Be Of Same Size , Cross Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Opposite Ends Shall Be Of Same Size , Cross Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042, Opposite Ends Shall Be Of Same Size , Tee Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 3000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 6000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Tee Cs, 9000,0, B16.11, Sw Ends, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 3000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 6000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 9000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 9000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 9000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 9000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 9000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 9000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 9000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 9000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 9000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 9000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Hcpl Cs, 9000,0, B16.11, Sw End, Forged, A105n, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Nipple Cs (Caustic), B36.10M, Mnpt X Bw End,Sch Xxs, Seamless, One End Bw, Other End Thrd., Length = 150 Mm, Nipple A106 Gr.B, Mat. Deliv. Cond. Sch Xxs, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A105n Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Nipple Cs (Caustic), B36.10M, Mnpt X Bw End,Sch Xxs, Seamless, One End Bw, Other End Thrd., Length = 150 Mm, Nipple A106 Gr.B, Mat. Deliv. Cond. Sch Xxs, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A105n Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Nipple Erw Cs, Is 1239, Mnpt X Pe,Sch Hvy, Erw, One End Plain, Other End Thrd., Length = 150 Mm, Nipple Is 1239 Part-1,Hvy, Mat. Deliv. Cond. Sch Hvy, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A105n Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Nipple Erw Cs, Is 1239, Mnpt X Pe,Sch Hvy, Erw, One End Plain, Other End Thrd., Length = 150 Mm, Nipple Is 1239 Part-1,Hvy, Mat. Deliv. Cond. Sch Hvy, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A105n Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Nipple Cs, B36.10M, Mnpt X Pe,Sch Xs, Seamless, One End Plain, Other End Thrd., Length = 150 Mm, Nipple A106 Gr.B, Mat. Deliv. Cond. Sch Xs, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A105n Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Nipple Cs, B36.10M, Mnpt X Pe,Sch 160, Seamless, One End Plain, Other End Thrd., Length = 150 Mm, Nipple A106 Gr.B, Mat. Deliv. Cond. Sch 160, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A105n Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Nipple Cs, B36.10M, Mnpt X Pe,Sch 160, Seamless, One End Plain, Other End Thrd., Length = 150 Mm, Nipple A106 Gr.B, Mat. Deliv. Cond. Sch 160, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A105n Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Nipple Cs, B36.10M, Mnpt X Pe,Sch Xxs, Seamless, One End Plain, Other End Thrd., Length = 150 Mm, Nipple A106 Gr.B, Mat. Deliv. Cond. Sch Xxs, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A105n Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 , Nipple Cs, B36.10M, Mnpt X Pe,Sch Xxs, Seamless, One End Plain, Other End Thrd., Length = 150 Mm, Nipple A106 Gr.B, Mat. Deliv. Cond. Sch Xxs, Supp. Requirements, For Size <=1 1/2 , Taper External Threads, As Per Asme/Ansi B1.20.1, Add. Information, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0004, Alternative Forgedas, A105n Is Acceptable And, Documents To Be Followed, Tk-1Zzza-Pi-Spe-0005 And In-042 => Limited

Corrigendum Details

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	15-04-2025	Addendum_01	Other	28-04-2025

Key Value

Document Fees

Refer document

EMD

Refer document

Tender Value

Refer document

Attachment

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB

Disclaimer :

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Also Visit

Tenders

Assam Tenders

Distribution and Conditioning Tenders

Pipe Supply Tenders

Pipe and Tube Fittings Tenders

Tender For Supply Of Fitting Block Forged _Cs_ As_Ss For Ag And Ug Piping For Msb, Pfcc, Gds And Ff For Nrep, numaligarh-Assam

Tender Notice

Tender Documents

Tender Details

Corrigendum Details

Key Value

Attachment

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Supply Of Fitting Block Forged _Cs_ As_Ss For Ag And Ug Piping For Msb, Pfcc, Gds And Ff For Nrep, numaligarh-Assam

Tender Notice

Tender Documents

Tender Details

Corrigendum Details

Key Value

Attachment

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us