Infrastructural Developments Of Chakdah Wtp Sub District Laboratory For Making It Nabl Complaint, Under Nadia Arsenic Division-I, Phe Dte- 1 Partition Wall for Chemical Room, Customer Service Room and Chemical Storage RoomSupplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - InCharge. (Payment will be made on finished length of the work) (A) In 10-12 Micron thickness Annodizing film I) Coloured 1)Fixedpartitions. (Unsupported length of vertical member more than 1.5 mtr.or both ends of vertical member restrained but panels more than 0.9 sq.m.)(A) In 10-12 Micron thickness Annodizing film I) Coloured 1) Fixed partitions.(Unsupported length of vertical member more than 1.5 mtr.or both ends of vertical member restrained but panels more than 0.9 sq.m.)i) Top , bottom & side member. 2 ii) Intermediate member 3 iii) Glazing clip 4 Movable door shutteri) Door frame. (Top & sides) 5 3) Shuttera)Top rail 6 b)Bottom rail 7 c)Lock rail 8 d)Door vertical 9 Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge.(i) For sliding windowsb) U shaped EPDM gasket for frames 10 ii) For openable / Casement windowsa) EPDM / weather gasket for outer frame and mullion 11 Supplying heavy duty hydraulic double action floor spring along with top pin/set of pivots conforming to IS: 6315 or any approved make as per direction of Engineer in charge. 12 Supplying 125 mm. Dia acrylic handle for aluminium door as per approved make & brand.B) Colour 13 Supplying 4 lever mortice lock or any approved make and brand as per direction of the Engineer- in -Charge(i) 150 mm. 14 Filling the gap in between aluminium frame & adjacent RCC / Brick/ Stone work by providing weather silicon sealant over 6mm dia backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete. Upto 5 mm depth and 5 mm widtha) Ground Floor 15 Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:-(B)Partly glazed partly panelled or fully glazed single leaf alunminium swing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages,with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry set neoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer in charge 42.11 The rate includes the hire charge of all tools and plants,adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded alumium sections, glass, panel boards neoprene / EPDM gasket, locking arrangement, weather gasket / wool pile, floor spring, top pin, handle, tower bolt, glazing clips etc. (10% rate reduction has to be made for swing doors or partitions where floor sping is not used. 10% enhancement of rate is to be made where door frame of extruded aluminium sections has to be fitted and fixed to masonry wall. 5% rate enhencement may be allowed for double leaf swing door. Payment shall be made for the shutter area only exept where door frame is fixed the entire opening shall be taken to consideration.Payment for door frame sections are to be paid seperately). 16 D) Partly glazed and partly panelled partition or fixed glazing made of extruded and anodised alloy aluminium sections, fabrications after cutting to proper shape and size, drilling and aligning fitted with inbuilt locking arrangement cutting the glass / board (prelaminated / particle / block) to requisite shape and size moulding the edges fitted and fixed glazing clips and dry set neoprine /EPDM gasket, along with all other necessary arrangements for fixing the partition to walls, floors, beams, columns polysulphide sealant for water proofing if necessary complete in all respect as per drawing and specifications and direction of the Engineer in charge The rate includes the hire charge of all tools and plants, adhesive, joineries such as screw, fastener but excluding the cost of extruded aluminium sections, EPDM gasket, glass, board, glazing clips, locking arrangement, etcI) For partitions using section of size: a) 63.50 mm x 38.10 mm 17 Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) (b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating) 18 Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.iii) 5mm thick clear glass. 19 (A) Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T 2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 6 mm thick High Pressure Steam Cured Non Asbestos Fibre Cement Standard Ceiling Board (Density > 1300 Kg/m3) of size 595 mm X 595 mm, conforming IS 14862 & Type B Category III of ISO 8336, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge. In ground floor.(A) False Ceiling (with 6mm thick Fibre Cement Designer Board and E-Grid T 2430) 20 Laboratory FurnitureSupplying, fitting and fixing boiling water resistant ply conforming tolS:303 1989bondedwithphenol formaldehyde synthetic resin of approved make and and fitted and fixed as per design as per approval and direction of Engineer-in Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor i) 19mm 21 ii) 6 mm 22 Supplying fitting, fixing decorative lamination Conforming to IS: 2046: 1995 as per approved make, Brand, finish and thickness with fitting, fixing the sameOn Particle/MDF/Ply Boards with recommended/ Better attachment as per direction of Engineer-incharge. The rate includes the cost of labour, adhesive and all Incidental charges thereof. In ground floor Glossy/Matt/Suede excluding surface tezture or metallic lustre. (i) Thickness of laminate 1.5mm 23 ii) Thickness of laminate 1 mm 24 Anodised aluminium decorative handle (hexagonal / fluted)of approedquality fitted and fixed complete.(i) 150mm plate x 10mm dia rod x 12mm hexagonal/fluted. 25 Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.) ii) Sal Local 26 Supplying, fitting and fixing Godrej Multi Lock or equivallent . 27 Items of Electrical WorksDistn. wiring in 22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish Average run 10 mtr [1(v)/E-20] 28 Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish point Average run 7.5 mtr On Board RM Rate 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC On Board.. 29 Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [9(b)/E-18] 30 Supply & Fixing 240 V, 4 nos. 16 A, 3 pin Modular type plug socket with 4 nos. 16A Modular type switch (Brand approved by EIC), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 31 Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 32 Supplying and fixing double-door SPN MCB No Distribution Board with IP-42/43 protection, concealed in wall as per GS.2+12Way[ Legrand ] 33 Supplying and Drawing 1.1 KV single core stranded FR PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 3 x 22/0.3 (1.5 sqmm) 34 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC 35 Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI U hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles 19 mm dia 3 mm thick polythene pipe without earth continuity wire 36 Supply of 4 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make Polycab / Nicco / Fort Gloster] 6 Sq. mm [ NS ] 37 Supply 9W LED lamp to the lamp point. [Phillips make] 38 Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. 39 Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. 40 Supply of ceiling fans complete with all accessories having the following Model/Cat No. (Make -Crompton Greaves) 48 (1200 mm) Sweep (Aura Metallic) 41 Supply of AccessoriesSupply, delivery, fitting of Nilkamal / Green Soul/ Cell Bell Visitor Chair (87 CM X 52 CM X 60 CM) 42 Supply and delivery of Commercial Branded PC with Core i5 Processor / 4GB RAM / 500GB HDD etc 43 Supply, delivery, installation, demonstration & training on operation of 2 KYAl24 Volt lnverter with two numbers 150 AH Tubular Battery required for different water quality testing laboratories engaged in rural drinking water quality testing programme in the State of West Bengal under Public Health Engineering DePartment 44 Supply installation and dempnstation of FYRAX/Supermax brand CO2 type Fire extinguisher ISI markedconforming to IS: 15683 and IRS approved capacity 4.5 Kg complete set with delivery hose with horn , wheel tupe valvewall bracket and suitable for fire on electrical and delicate instruments. 45 Supply installation and dempnstation of FYRAX/Supermax brand ABC Dry Powder Fire extinguisher (Stood pressure type) capacity 6 kg, duly ISI marked and CE approved conforming to IS: 15683:2006 withy IS14609ISI marked ABC powdercomplete with squeeze grop release valve, discharge pipe, locking arrangement, pressure gauge fitted with MAP powder and dry nitrogen gas complete with wall bracket for general fire hazard. 46 Supply of Safety sower and eye wash specification as per IS 10592:1982SS tray open ball valve with ABS push plate and activation for shower - pull rod for eye wash-push plate. 47 Supply delivery and installation of 1.5 Ton Air condition with voltage stabilizor for better enviromental monitoring of water testing laboratory. 48 Supply delivery and installation of 1 Ton Air condition with voltage stabilizor for better enviromental monitoring of water testing laboratory. 49 Supply delivery and installation of refrigerator for better sample preservation of the drinking water testing laboratory. 50 Supply fitting fixing of Blair Epic/ Kent/Aquaguard RO (Reverse Osmosis) UF TDS 17 Litre capacitywith UV disinfection system water purifier. 51 Microtek Line Interactive UPSwith AVR of Rating 0.65 KVA With Warranty of 3 Years 52 Single function printer with Automatic 2sided printing and Wireless connectivity 53 Add 18% GST (SGST-9% CGST-9%)(Payment to be made as per prevailing rules in vogue & as per actual executed ) (Item No. 1.01 - 1.40) 54 Add1% for labour welfare cess(Payment to be made as per prevailing rules in vogue & as per actual executed ) (Item No. 1.01 - 1.40)
