Tender For Maintenance Of Distribution Main Pipe Line Work At Sector Omega (Golf Link) For 3 Years, Greater Noida. - Excavation In Foundation In Ordinary Soil (Loam, Clay Or Sand) Including Lift Upto 1.50 M And Lead Upto 30 M And Including Filling Wateri, noida-Uttar Pradesh

Tender For Maintenance Of Distribution Main Pipe Line Work At Sector Omega (Golf Link) For 3 Years, Greater Noida. - Excavation in Foundation in ordinary soil (Loam, Clay or Sand) including lift upto 1.50 m and lead upto 30 m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation tranches or into the plinth and removal and disposal of surplus earth as directed by the Engineer in charge upto a distance of 30 m from the foundation tranches 3 All kinds of soil 4 Providing and Laying, size of finolex makes PVC pipes 6kg/Cm2 with required PVC standard special confirming to IS codes with latest amendment and lowering the same trenches and laying true to alignment and gradient complete i/c the cost of cutting of pipes for making up to lenght and making joints i/c cost of socket, platochem PV-85 pvc solvent cement complete. PVC Pipe must be confirming to IS: 1985-2000 with latest amendment. make-Finolex industries Ltd. Supremeindustries Ltd (Rate as per comparative statement per Rm. N.S.I NO. 5 90mm dia with coupler @6kgf/Cm2 pressure with i/c all PVC standard Specials @ 209.10-12% Less =186.69 6 110mm dia with coupler @6kgf/Cm2 pressure with i/c all PVC standard Specials @ 298.2-12% Less= 266.25 7 140mm dia with coupler @6kgf/Cm2 pressure with i/c all PVC standard Specials @ 492.9-12% Less= 440.08 8 150mm dia with coupler @6kgf/Cm2 pressure with i/c all PVC standard Specials @ 611.1-12% Less=545.62 9 Providing and fixing C.I. double acting air valve of approved quality: (DSR-18/18.59.2) 10 Air valve 80mm dia. 11 Providing and fixing Suice Valve shall generally conform to IS 14846 with latest amenment, with length over flanges as per PD of IS 14846 corresponding to BS EN-558/ISO 5752 Basic Series 3 in CI construction having metal seating (IS 318 Gr. LTB 2) with complete component & Material of construction following below: 12 1- Body/Door/ Dome - Cast Iron IS 210 Gr. FG 2602- Spindle - Non rising: Stainless Steel AISI 4103- Body seat/Door face Gun Metal: IS 318 Gr. LTB 2 (rings to be press fitted and riverted; no screes allowed)4-Rivets -Soft annealed brass5-Spindle Nut-Gun metal: IS 318 Gr. LTB 26- Stem seal - Greased Hemp7-Fasteners - Carbon Steel8- Flange Drilling - IS 1538 Table 4 & 69-PN 1.010- Accessories (400 mm and above) - Ball thrust bearing to be housed above the wet chamber ie. Above the gland. Enclosed Spur Geart Box for ease of operationn. Aaiir Plug11- Painting / Coating Inside & Outside epoxy liquid coated; DFT minimum 250 micron, shade RAL 5005/5015 (Blue)12-Hydro-test (Open Ended only) Seat: 10/16 Kg/cm2; Body: 15/24 Kg/cm213- Upto 600mm dia manual operated & above 600 mm gear boxMake- Indian Valve Pvt. Ltd. (IVC) / Kirloskar Brothers Limited (Kirloskar) 13 150mm dia sluice valve (Kirlosker/IVC Make) @ 24073.60-12% Less= 21494.28 14 200mm dia sluice valve (Kirlosker/IVC Make) @ 42038.9-12% Less= 37534.73 15 250mm dia sluice valve (Kirlosker/IVC Make) @ 54867.2-12% Less= 48988.57 16 300mm dia sluice valve (Kirlosker/IVC Make) @ 78362.6-12% Less= 69966.60 17 Providing and laying M.S Specials such as tee, Bends, Collars, Tapers, gap, Pieces, including flange ends as required, painting, cutting, welding as per site requirments of MS pipe thickness etc complete in all respect as per direction of E/I @ 75.10-12% Less 67.05/Kg. (Rate As Per NSI) 18 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1) cement: 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (Icement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (Icement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design: (DSR-18.33.1) 19 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 20 Constructing masonry Chamber 60x60x100 cm inside, in brick work in cement mortar 1:4 (1) cement: 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (Icement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (Icement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design: (DSR-18.34.1) 21 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 22 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. 15,20,25,32,40,50 mm nominal outer dia Pipes. In complete RateAs Per (DSR- 2018) 23 15 mm nominal outer dia pipes (DSR-18/18.7.1) 24 20 num nominal outer dia pipes (DSR-18/18.7.2) 25 25 mm nominal outer dia pipes (DSR-18/18.7.3) 26 32 mm nominal outer dia pipes (DSR-18/18.7.4) 27 40 mm nominal outer dia pipes (DSR-18/18.7.5) 28 50 mm nominal outer dia pipes (DSR-18/18.7.6) 29 Cutting existing PVC Water main pipe line following nominal dia inserting special and fitting bailing or pumping out water cartage of required materials returning the scrap to site store etc. complete including the cost of insertion pipe (upto 1.00m) special also including making joint for repair of leakage and baring out the existing main benders as well as subsequent and all type of labour T&P etc. complete for proper completion of work after repairing the leakage the site should be neatly dressed. (NSI/GNIDA Approved Rate) 30 90 mm dia (NSI) 31 110 mm dia (NSI) 32 140 mm dia (NSI) 33 150 mm dia (GNIDA) 34 200 mm dia (GNIDA) 35 250 mm dia (GNIDA) 36 Repairing of C.I. Sluice valve with Joint, Nut bolts, packing, change of gun metal sleeves, change of spindle and cartage T&P etc. complete as per respect & direction of Engineer-in charge. AR/GNIDA 37 150 mm dia 38 200 mm dia 39 250 mm dia 40 300 mm dia 41 Demolishing cement concrete manually by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in-charge. 42 Nominal concrete 1:3:6 or richer mix (i/cequivalent design mix) DSR-18/15.2.1 43 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) DSR-18/15.2.2 44 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer in-charge (DSR-18/15.3) 45 Labour Cess and GST will be paid extra as per govt. orders

INR 2690 /-

INR 302000.0 /-

INR 1.50 Crore /-