Supplying And Installation Of Furniture For 4 No. Temporary Courts At Existing Judicial Courts Complex Jalandhar , Judges - Main Chair For Court & Retiring Room - Providing, Supplying And Placing Of Highback Chair For Dias / Retiring Room . Seat/Back Assembly:The Cushioned Seat Assembly Consshould Be Ts Of Seat Outer (Material-30% Glass Fiber Nylon)& Upholstered Seat Inner (Material- Poly Propylene) With Moulded Polyurethane Foam & Polyster Fabric. The Netback Should Bemade Up Of Back Outer (Material-Glass Fiber Filled Nylon)& Back Inner (Material- Pp) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn.Full Back Size: 46.5 Cm. (W) X 60.0 Cm. (H)Seat Size : 51.0 Cm. (W) X 49.0 Cm. (D)High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density = 45 +/- 2 Kg/M³ And Hardness Load 12 +/- 2 Kgffor 25% Compression.Back Spine: The Support Spine Should Bemade Up Of High Pressure Die Cast Polished Hed Aluminum.Armrests : The Armrest Should Behaving Two Adjustment, Height (6.0±0.5Cm) And Depth (6.0±0.5Cm). Height Adjustment Should Beprovided In Aluminum Structure Of Armrest Which Should Beconnected To Aluminum Back Spine And Should Beoperated By Button. The Depth Adjustment Should Beprovided In Pad Which Should Befixed To Armrest Structure. Armrest Top Should Bemade Up Of Pu Molded Over Plastic Inner.Active Bio-Synchro Mechanism: The Adjustable Tilting Mechanism Should Bedesigned With The Following Features:• 360° Revolving Type• Front-Pivot For Tilt With Feet Resting On Ground & Continuous Lumber Support Ensuring More Comfort• Tilt Tension Adjustment Can Be Operated In Seating Position• 5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair• Seat / Back Tilting Ratio Of 1:2• The Mechanism Housing Should Bemade Up Of Hpdc Aluminum & Black Powder Coated (Dft 40 To 60 Micron)Seat Depth Adjustment: Seat Depth Adjustment Should Beintegrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Beof 3.75±0.1 Cmlumbar Support Assembly: The Lumbar Support Assembly Should Consistof Lumbar Spine (Material-Glass Fiber Filled Nylon) Which Should Befixed Toaluminum Back Spine. The Lumbar Pad (Material- Poly Propylene) Should Befixed To Lumbar Spine Through Lumbar Pad Support. Lumbar Support Assembly Has Height Adjustment Of 5.0±0.5Cm.Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0 ± 0.3Cm.Pedestal Assembly With Castors:The Pedestal Should Behigh Pressure Die Cast Polishedaluminum And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be65.0 ± 0.5Cm. Pitch-Center Dia.(75.0 ± 1.0Cm. With Castors.)Headrest :The Neckrest Assembly Consshould Be Ts Of Upholstered Neckrest Inner(Material-Polypropylene) With Moulded Polyurethane Foam And Polyster Fabric.Upholstered Inner Should Befixed To Neckrest Cover.Neckrest Should Befixed To Back Assembly Through Neckrest Spine .Neckrest Assembly Has Height Adjustment Of 5.5 +/- 0.5Cm And Rotation Adjustment Of Overall 20° +/- 2°.Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Pp Having 6.0± 0.1Cm Wheel Diameter.Overall Dimensions Of Chairseat Height - Min 45.5 To Max 55.5Cm , Reader / Steno Chair: Providing, Supplying And Placing Of Midback Chair Reader /Steno Chair . Seat/Back Assembly:The Cushioned Seat Assembly Consshould Be Ts Of Seat Outer (Material-30% Glass Fiber Nylon)& Upholstered Seat Inner (Material- Poly Propylene) With Moulded Polyurethane Foam & Polyster Fabric. The Netback Should Bemade Up Of Back Outer (Material-Glass Fiber Filled Nylon)& Back Inner (Material- Pp) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn.Mid Back Size: 36.5 Cm. (W) X 55.0 Cm. (H)Seat Size : 51.0 Cm. (W) X 49.0 Cm. (D)High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density = 45 +/- 2 Kg/M³ And Hardness Load 12 +/- 2 Kgffor 25% Compression.Back Spine: The Support Spine Should Bemade Up Of High Pressure Die Cast Polished Hed Aluminum.Armrests : The Armrest Should Behaving Two Adjustment, Height (6.0±0.5Cm) And Depth (6.0±0.5Cm). Height Adjustment Should Beprovided In Aluminum Structure Of Armrest Which Should Beconnected To Aluminum Back Spine And Should Beoperated By Button. The Depth Adjustment Should Beprovided In Pad Which Should Befixed To Armrest Structure. Armrest Top Should Bemade Up Of Pu Molded Over Plastic Inner.Active Bio-Synchro Mechanism: The Adjustable Tilting Mechanism Should Bedesigned With The Following Features:• 360° Revolving Type• Front-Pivot For Tilt With Feet Resting On Ground & Continuous Lumber Support Ensuring More Comfort• Tilt Tension Adjustment Can Be Operated In Seating Position• 5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair• Seat / Back Tilting Ratio Of 1:2• The Mechanism Housing Should Bemade Up Of Hpdc Aluminum & Black Powder Coated (Dft 40 To 60 Micron)Seat Depth Adjustment: Seat Depth Adjustment Should Beintegrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Beof 3.75±0.1 Cmlumbar Support Assembly: The Lumbar Support Assembly Should Consistof Lumbar Spine (Material-Glass Fiber Filled Nylon) Which Should Befixed Toaluminum Back Spine. The Lumbar Pad (Material- Poly Propylene) Should Befixed To Lumbar Spine Through Lumbar Pad Support. Lumbar Support Assembly Has Height Adjustment Of 5.0±0.5Cm.Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0 ± 0.3Cm.Pedestal Assembly With Castors:The Pedestal Should Behigh Pressure Die Cast Polishedaluminum And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be65.0 ± 0.5Cm. Pitch-Center Dia.(75.0 ± 1.0Cm. With Castors.)Headrest :The Neckrest Assembly Cons Should Be Ts Of Upholstered Neckrest Inner(Material-Polypropylene) With Moulded Polyurethane Foam And Polyster Fabric.Upholstered Inner Should Befixed To Neckrest Cover.Neckrest Should Befixed To Back Assembly Through Neckrest Spine .Neckrest Assembly Has Height Adjustment Of 5.5 +/- 0.5Cm And Rotation Adjustment Of Overall 20° +/- 2°.Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Pp Having 6.0± 0.1Cm Wheel Diameter.Overall Dimensions Of Chairseat Height - Min 45.5 To Max 55.5Cm , Reader And Steno Table :Providing And Supplying Reader / Steno Table With An Overall Size 1200Mm X 610Mm X 750Mm. The Top Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius.. Fixed Top Supporting Pedestal Shall Be Supplied At One Side Of The Table. The Pedestal Shall Be Made Up Of 18Mm Thick Board . It Should Have 2 Nos. Of Drawer I.E. 1 Box And 1 Filing. It Should Be Operated On Ball Bearing Sliding Channel And Recessed Plastic Handle With Centralized Locking Mechanism. The Table Shall Be Clad With Modesty Panel. It Should Be 18Mm Thick Made Up Of Pre-Laminated Particle Board.There Shall Be Leveller Provided At The Bottom. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Court Room - Chairs For Advocates Providing And Supplying Visitor Chair With Ergonomic Design For User Comfort. The Seat And Back Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Moulded Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ In Seat And 40Mm Thick Having Density 40Kg/M³ In Back. The Same Shall Be Upholstered With Tapestry 1Mm Thick And 300 Gsm. The Back And Base Of Chair Shall Be Supplied With Polypropylene Bead On Edges And The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine. The Seat And Back Shall Be Arrested Together With 50-60? Thick Powder Coated Hr Steel Spine And The Armrest Shall Be Used Of Black Integral Polyurethane Arm With Metal Insert Completely Joint With Seat And Back. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ms/Crca Powder Coated Round Pipe Of Dia. 25.4Mm With 2Mm Thick. There Shall Be Co-Polymer Polypropylene Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 460±10 Mm(W) X 450±10 Mm(D) And Back Size Shall Be 460±10 Mm(W) X 400±10 Mm(H) From Seat. Seat Height = 450±10 Mm, Overall Height Shall Be = 830±10 Mm, Overall Width - 555±10 Mm, Overall Depth = 595±10 Mm.@Rs /- Each , Court Room - Table For Advocates Supplying & Placing Modular Table In Completely Knock Down Conditions With An Overall Size 1500Mm X 610Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Worktop Shall Be Made Up Of 25 X 50 Mm Sq Pipethick Particle Board With Approved Laminate And Finish As Per Approved Shade. The Top Profile Shall Be In Rectangle Shape With Front And Back Full Round Post Form And Other Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported Over Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be Made Up Of 18 Mm Thick Particle Board And Profile Shall Be In Linear Shape With Front And Back Full Round Post Form And Other Edge With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor , Court Room Judges Dias Table - Supplying And Placing In Position Main Table & Pedestal Of The Following Specifications. 1650X1950x750 Primary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Soft Closing Access Flap With In-Build Power Box Are Provided On Work Surface For Wire Management Secondary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Modesty Panel Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Under Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security , Court Room - 3 Seater Bench For Public Providing, Supplying And Placing Of Waiting Chair.It Should Bemade Up Of Black Powder Coated Rectangular M.S.Erw Tube Having 8.0 ± 0.03 Cm X 4.0 ± 0.03 Cm X 0.2 ± 0.014 Cm Size.It Should Be Chrome Plated Made Of Cold Rolled Steel With 0.12 ± 0.013 Cm Thinkness.It Should Bepowder-Coated Perforated Shell Made From Cold Rolled M.S. Sheet (Din1623 Partl St-12 Grade) 0.14 ± 0.013 Cm Thickness.The Side Bar Should Bemade Of Chrome Plated Solid Steel 3.0 ± 0.03 Cm X 1.2 ± 0.3 Cm With Fluting And Plastic Inserts. The Shell Should Beassembled On The Cross Beam With Help Of M8 Bolts (Per Seat - 8 Nos. Seat To Bracket And 4Nos. Bracket To Cross Beam). Overall Dimensions Seat Height - 40.0Cm, Height - 67.5 Cm,Width & Depth Of Chair As- Width-163.0Cm And Depth-57.0 Cm , Retiring Room Judge Table : Supplying & Placing Executive Table With Credenza And Pedestal Unit In Completely Knock Down Conditions With An Overall Size 1600Mm X 900 Mm X 750Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Worktop Shall Have The Size 1650 Mm X 850Mm Made Up Of 25Mm Thick Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape With Front And Back Full Round Post Form Edges And Other Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be Made Up Of 25Mm Thick Particle Board And Profile Shall Be In Linear Shape With Front And Back Full Round Post Form Edges And Other Edge With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board With Appropriate Pvc Edge Banding Connected With Both End.. It Should Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Top 25Mm Thick And Other Parts 18Mm Thick Like Shutter, Back, Side Panel Etc. It Shall Have 2 Nos. Of Shutter Operated With The Assistance Of Sliding Rail Track And Ss Handle And Multi-Purpose (Mp) Locking Mechanism. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding, Skirting Shall Be Provided At Bottom. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 680Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 1 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. The Pedestal Shall Be Mounted Over 50Mm Injection Moulded Nylon Castor.All The Size Shall Have The Tolerance Of Upper And Lower Deviation Of ±10Mm For Board & ±0.2Mm For Metal.. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Retiring Room Visitor Chair:-Providing And Supplying Visitor Chair With Ergonomic Design For User Comfort. The Seat And Back Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Moulded Polyurethane Foam 50Mm Thick Having Density 40Kg/M³ In Seat And 40Mm Thick Having Density 40Kg/M³ In Back. The Same Shall Be Upholstered With Tapestry 1Mm Thick And 300 Gsm. The Back And Base Of Chair Shall Be Supplied With Polypropylene Bead On Edges And The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine. The Seat And Back Shall Be Arrested Together With 50-60? Thick Powder Coated Hr Steel Spine And The Armrest Shall Be Used Of Black Integral Polyurethane Arm With Metal Insert Completely Joint With Seat And Back. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ms/Crca Powder Coated Round Pipe Of Dia. 25.4Mm With 2Mm Thick. There Shall Be Co-Polymer Polypropylene Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 460±10 Mm(W) X 450±10 Mm(D) And Back Size Shall Be 460±10 Mm(W) X 400±10 Mm(H) From Seat. Seat Height = 450±10 Mm, Overall Height Shall Be = 830±10 Mm, Overall Width - 555±10 Mm, Overall Depth = 595±10 Mm. , Retiring Room Side Table- Supplying And Fixing Of Side Table Made Of Teak Wood 1.6’’ X 1.6’’ X 2’ , Coat Stand -Supplying And Fixing Of Wooden Coat Stand , Court Room - Almirah For Steno Providing, Supplying And Placing Steel Almirah In Perfectly Upright And Straight Position. The Overall Size Of The Almirah Shall Be 915Mm (W) X 485Mm (D) X 1980Mm (H) Including Legs. It Should Be Supplied With 4 Nos. Of Adjustable Shelves I.E. 5 Loading Compartments. Door Shall Be Made Of 1Mm Thick And All Other Components Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Stiffeners Shall Be Provided In Shelf & Door. The Steel Hinged Door Shall Be Provided With Locking Mechanism Which Is Assembled With Bolt Arrangement. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Per Each Shelf Shall Be 40Kg Maximum. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Epoxy Polyester Powder Coated To Be Thickness 50-60? , Name Plate - Supplying & Fixing Of Name Plate , Notice Board -Supplying And Fixing Of Notice Board Size 1200 Mm X 1600 Mm , Roller Blinds - Supplying And Fixing Of Roller Blinds , Steel Dustbin -Suppling And Fixing Of Stainless Steel Dustbin . , Petition Box -Supplying And Fixing Of Petioner Box , Court Room Kathgharas -Supplying & Assembling Of Kathgharas Made Of Teak Wood, Pu Polished ,Consisting Of 35 Mm Thick Ply Board For Facia & Shelve ,With 30 Mm Thick Vertical Bars And 50 Mm Thick Teak Batten On Top
