Tender For Supply/Fixing Of Lt Panel And Cabling Etc Works At Nmy Anoopshar - Supply And Erection Of Factory Fabricated And Wired Metal Clad Dust And Vermin Proof Floor Mounting Panel Tpn Switch Board Complete With The Following Hrc Type Heavy Duty Tpn Fu, Bulandshahr-Uttar Pradesh

Tender For Supply/Fixing Of Lt Panel And Cabling Etc Works At Nmy Anoopshar - Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B a only.Incoming -400 Amp. TPN-1 Nos.Outgoing-100 Amp. TPN-3 No & 63 Amp. TPN-2 Nos. 2 Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. 3 Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. 4 Supply and laying of aluminium conductor PVC insulated armoured served, sheathed cable 1100 volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick stand alround and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Inchange, complete in all respect. The armoring of the cable shall be properly connected with the earthy conductor by clamps etc. 35 sq. mm. 3.5 core cable.20a.1.1 5 Supply and laying of aluminium conductor PVC insulated armoured served, sheathed cable 1100 volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick stand alround and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Inchange, complete in all respect. The armoring of the cable shall be properly connected with the earthy conductor by clamps etc. 120 sq. mm. 3.5 core cable.20a.1.18 6 S&F of 100 Amp. four pole change over switch on 40mm x 40mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge. 7 S/F of Cubical Box dust and Vermin Proof 2/3/4 way distribution box 14 SWG M.S sheet of 1.5 mm thick with the suitable size of copper bus 3 Nos. 500 Amp. Cut out unit as incoming inside locking arrangement handle danger plate etc. including 2 coat ofapproved quality paints. the Job including all materials labour T/P suitable foundation for mounting the box etc. complete in all respects. 8 Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 9 S/F of 11 KV TPMO with Polymer Insulator. UPPCL X50 515 (92) UPPCL 10 S/F 3 phase D.O. Fuse Set 11 KV. UPPCL X50 515 (93)UPPCL

INR 1600 /-

INR 64000.0 /-

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB