Tender For Civil Repair And Maintenance Works Related To Vip Guest House Chandbadh Bhopal.-- 1 Rest House Bhopal 2 3006147 13.2.2 Kitchenwith complete back yard renovation & store room renovation, CIVIL WORKS, 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 3 3006156 13.8 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) 4 3006437 15.3 Demolishing R.C.C. workmanually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. 5 3006435 15.2.1 Demolishing cement concrete manually/by mechanical means including disposal..1:3:6 or richer 6 3006442 15.6.3 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. In cement mortar. 7 3006506 15.48 Dismantling old plaster or skirting raking out joints andcleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead 8 3006455 15.14.1 Dismantling doors, windows and clerestory windows(steel or wood) shutter including chowkhats, architrave, holdfastsetc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below 9 3006322 14.27 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 10 3008465 21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and …..aluminium (minimum thickness of powder coating 50 micron (fixed) 11 3008482 21.1.2.2 Providing and fixing aluminium work for doors, windows, ventilators and …. aluminium (minimum thickness of powder coating 50 micron) Movable 12 3003068 21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. .... (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) 13 3003069 21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. .... (Cost of aluminium snap beading shall be paid in basic item) :With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) 14 3004996 6.6.2 Brickworkwithwellbruntopen bhatta,bricks,crushing strengthnot less than 25kg / cm2 ... level and upto floortwoleveli/ccuringetc complete.Cement Mortar 1:6 (1 cement : 6 sand) 15 3006206 13.41 Providing and applying white cement based putty of average thickness 1 mm, of ...only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. 16 3006279 14.1 Repairs to plaster of thickness 12mm to 20mm in patches of area2.5 sq....ofrubbishto the dumping ground within 50metres lead:With cement mortar 1:4 (1 cement : 4 sand) 17 3006211 13.46 Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work 18 3006451 15.11.1 Dismantling tile/ kota /marble/ Granite work.Upto 25mm thick. 19 3005875 11.49 ProvidingandfixingCeramicglazedwalltiles 300x450mmor more(havingthickness6to7 mm)of1stquality conforming toIS:15622of approvedmakeinallColours&shades,except burgundy, bottle green, black laid on 12mm thick bedofCementMortar1:3(1Cement:3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqmincluding pointing the joints with white cement and matching pigments etc., complete. 20 3005910 11.77.2 Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete...Dark shade (terracotta) Size 600X600mm thickness 9-10mm 21 3004808 4.1.2.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 40mm nominal size graded stone aggregate. M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate 22 3005271 9.43.2 Providing and fixing M.S. grills ofrequired pattern in frames of windows etc. withM.S.flats,squareorroundbars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. 23 3005212 9.18.2 Providing and fixing ISI marked flush door shuttersconformingto IS:2202(PartI) decorativetype, core of block board constructionwithframeof1stclasshard wood and well matched teak 3 ply veneeringwith vertical grainsor cross bandsandfaceveneersonbothfacesof shutter. 30 mm thickincludingISImarked Stainless Steel butt hinges with necessary screws. 24 3005145 9.1.2 Providing wood work in frames of doors, windows,clerestorywindows and other frames, wrought framed and fixed in position withholdfastlugsorwithdash fastenersofrequireddia andlength(hold fast lugs or dash fastener shall be paid for separately). Sal wood 25 3007230 18.44.2 Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore….122 mm long weighing not less than 99 gm 26 3006795 17.58.1 Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing…75 mm diameter 27 3006622 17.11.4 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap…. 28 3006845 17.82 Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. 29 3006839 17.78.1 Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification….100 mm dia 30 3000145 40 NSOR Brickwork in plinth & foundation of Boundary wall with fly ash lime bricks (FALG bricks) having 75 Kg per sq cm average compressive strength conforming to IS:12894-2002, in cement mortar 1:6 , including cost of all material, labour, T&P, taxes, transportation ,curing etc. complete as per direction of Engineer in charge. 31 3004834 4.1.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering…..M-15 – Grade concrete 32 3005505 9.143 Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically and horizontally ) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ceiling/ floors with steel dash fasteners of 8 mm dia , 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc.complete, all as per direction of Engineerin-charge. 33 3006635 17.14.1.3 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :...510x1040 mm bowl depth 200mm. 34 3006637 17.14.2.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :..Kitchen sink without drain board..610x510 mm bowl depth 200 mm. 35 3006836 17.75 Providing and fixing CP brass soap dish of approved quality and make 36 3006809 17.61 Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outle 37 3005825 11.22.2 Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-inCharge.Granite fine grained dark crystal of other colours and various patterns. 38 3005854 11.35 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 sand) 25 mm thick.(Area of slab to be over 0.25 sqm) 39 3000381 2.28 Supplying and filling in plinth with hard muram/hard copra under floors including watering ramming cosolidating in layers not exceeding 20cm in depth and dressing complete. 40 3004838 4.1.2.3 M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate 41 3006409 14.76.1 Chippingof unsound/weak concrete materialfrom slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussiontypeor of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wirebrushesetc. anddisposalof debrisforalllead andliftsall complete as per direction of Engineer-In-Charge : 25 mm average thickness 42 3006453 15.12 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 43 3008185 5.1.1.2 Electrical works , Point wiring (excluding metallic switch box & sheet but including switches, …..connector for joints etc. as required as per specification for :- Light point/fan points.Primary medium point. (Using modular accessories) Short point 44 3008186 5.1.1.3 Point wiring (excluding metallic switch box & sheet but including switches, …..connector for joints etc. as required as per specification for :- Light point/fan points.Primary largepoint. (Using modular accessories) medium point 45 3008184 5.1.1.1 Point wiring (excluding metallic switch box & sheet but including switches, …..connector for joints etc. as required as per specification for :- Light point/fan points.Primary Short point. (Using modular accessories) long point 46 3009431 31.3.3 Tube light LED 1 X 18Watt, Integral i/c batten aluminium body, PC diffuser. 47 3009392 30.1.2 Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy ,hanging shackle,….Ceiling Fan ( ISI marked )-1200 mm Sweep,minimum air delivery 245 m³/min and service value ≥ 4.10 as per BEE 48 3008240 8.1.1.3 Power point wiring surface rigid P.V.C. conduit……Long point ..15 A 49 3009107 27.8.1.2 Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of C series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- Single pole MCB SP 6Amp to 32Amp 10kA rating 50 3008180 5.3.1 Circuit wiring2x2.5 Sq.mm. 51 3008201 5.3.2 4x2.5 Sq.mm. 52 3009447 31.7.3 Supply and fixing surface mounting LED down lighter, LED of 1 to 3Watt each assembled on single MCPCB, having color temp upto 6500K & having 50000 burning…. connection wire, testing etc. to complete the job. 7/8 Watt, color temp 3000-6500k as required. 53 3009464 31.11.3 Supplying and fixing flood light with high power LED of 3 to 6 Watt each assembled on single MCPCB and additional unique peanut lens on each LED, ....IP65 protection. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job. 60Watt, color temp 3000-6500k as required. 54 3009399 30.4.2 Supplying, erection and testing of approved make Fresh air fan AC 230-250 volts with connection and including frame bolt/anchor hole fasteners etc. complete finished and as required. 225 mm sweep bush type 55 3009121 27.8.3.2 Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of C series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- For Triple pole MCB TP 6Amp to 32Amp 10kA rating 56 3006147 13.2.2 Driver`s room & its outer premises renovation, 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 57 3006156 13.8 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) 58 3006437 15.3 Demolishing R.C.C. workmanually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. 59 3006435 15.2.1 Demolishing cement concrete manually/by mechanical means including disposal..1:3:6 or richer 60 3006442 15.6.3 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. In cement mortar. 61 3006506 15.48 Dismantling old plaster or skirting raking out joints andcleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead 62 3006455 15.14.1 Dismantling doors, windows and clerestory windows(steel or wood) shutter including chowkhats, architrave, holdfastsetc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below 63 3008465 21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with …..to IS: 733 and IS: 1285 Powder coated aluminium (minimum thickness of powder coating 50 micron (fixed) 64 3008482 21.1.2.2 Providing and fixing aluminium work for doors, windows, ventilators and ….. conforming to IS: 733 and IS: 1285 Powder coated aluminium (minimum thickness of powder coating 50 micron) Movable 65 3003068 21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. .... (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) 66 3003069 21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. .... (Cost of aluminium snap beading shall be paid in basic item) :With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) 67 3005185 9.8 Providing and fixing glazed shuttersfor doors,windowsand clerestorywindows using 4 mm thick float glass panes includingISImarkedM.S.pressedbutt hinges bright finished of required size with necessary screws. Second class teak wood 35 mm thick 68 3004996 6.6.2 Brickworkwithwellburntopen bhatta,bricks,crushing strengthnot less than 25kg / cm2 and water absorption notmorethan20%in superstructure above plinth level and upto floortwoleveli/ccuringetc complete.Cement Mortar 1:6 (1 cement : 6 sand) 69 3006206 13.41 Providing and applying white cement based putty of average thickness 1 mm, of ...only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. 70 3006279 14.1 Repairs to plaster of thickness 12mm to 20mm in patches of area2.5 sq....ofrubbishto the dumping ground within 50metres lead:With cement mortar 1:4 (1 cement : 4 sand) 71 3006211 13.46 Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work 72 3006451 15.11.1 Dismantling tile/ kota /marble/ Granite work.Upto 25mm thick. 73 3005875 11.49 ProvidingandfixingCeramicglazedwalltiles 300x450mmor more(havingthickness6to7 mm)of1stquality conforming toIS:15622of approvedmakeinallColours&shades,except burgundy, bottle green, black laid on 12mm thick bedofCementMortar1:3(1Cement:3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqmincluding pointing the joints with white cement and matching pigments etc., complete. 74 3005910 11.77.2 Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) ……....Dark shade (terracotta) Size 600X600mm thickness 9-10mm 75 3004808 4.1.2.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 40mm nominal size graded stone aggregate. M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate 76 3005271 9.43.2 Providing and fixing M.S. grills ofrequired pattern in frames of windows etc. withM.S.flats,squareorroundbars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. 77 3005212 9.18.2 Providing and fixing ISI marked flush door shuttersconformingto IS:2202(PartI) ….. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 78 3005145 9.1.2 Providing wood work in frames of doors, windows,clerestorywindows and other frames, wrought framed and fixed in position withholdfastlugsorwithdash fastenersofrequireddia andlength(hold fast lugs or dash fastener shall be paid for separately). Sal wood 79 3006466 15.19.2 Dismantling steel work in single sections.Channels, angles, tees and flats. 80 3006474 15.27.1 Dismantling roofing sheet.G.S. Sheet 81 3001328 10.15 Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete..Hot finished welded type tubes 82 3006002 12.15 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 83 3006240 13.64 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. 84 3004847 4.3.1 Centering and shuttering including strutting, propping etc. and removal of form work for :Upto plinth 85 3007230 18.44.2 Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore….122 mm long weighing not less than 99 gm 86 3006795 17.58.1 Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing…75 mm diameter 87 3006622 17.11.4 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap…. 88 3006845 17.82 Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. 89 3006839 17.78.1 Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification….100 mm dia 90 3000145 40NSOR Brickwork in plinth & foundation of Boundary wall with fly ash lime bricks (FALG bricks) having 75 Kg per sq cm average compressive strength conforming to IS:12894-2002, in cement mortar 1:6 , including cost of all material, labour, T&P, taxes, transportation ,curing etc. complete as per direction of Engineer in charge. 91 3004834 4.1.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering…..M-15 – Grade concrete 92 3005505 9.143 Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically and horizontally ) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ceiling/ floors with steel dash fasteners of 8 mm dia , 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc.complete, all as per direction of Engineerin-charge. 93 3006836 17.75 Providing and fixing CP brass soap dish of approved quality and make 94 3006809 17.61 Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outle 95 300682417.68.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame Rectangular shape 453x357m 96 3005825 11.22.2 Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-inCharge.Granite fine grained dark crystal of other colours and various patterns. 97 3006600 17.2.3 Providing and fixing AISI-304 (18/8) European type WC instead of white vitreous china pedestal type water closet. 98 3006409 14.76.1 Chippingof unsound/weak concrete materialfrom slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussiontypeorof approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wirebrushesetc. anddisposalof debrisforalllead andliftsall complete as per direction of Engineer-In-Charge : 25 mm average thickness 99 3001509 11.45 Providing and laying Ceramic glazed floor tiles 300x300mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS: 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20mm thick Cement Mortar 1:4 (1 Cement : 4 Sand) including pointing the joints with white cement and matching pigment etc. complete. 100 3008185 5.1.1.2 Electricalworks , Point wiring (excluding metallic switch box & sheet but including switches, …..connector for joints etc. as required as per specification for :- Light point/fan points.Primary medium point. (Using modular accessories) Short point 101 3008186 5.1.1.3 Point wiring (excluding metallic switch box & sheet but including switches, …..connector for joints etc. as required as per specification for :- Light point/fan points.Primary largepoint. (Using modular accessories) medium point 102 3008184 5.1.1.1 Point wiring (excluding metallic switch box & sheet but including switches, …..connector for joints etc. as required as per specification for :- Light point/fan points.Primary Short point. (Using modular accessories) long point 103 3009431 31.3.3 Tube light LED 1 X 18Watt, Integral i/c batten aluminium body, PC diffuser. 104 3009392 30.1.2 Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy ,hanging shackle,….Ceiling Fan ( ISI marked )-1200 mm Sweep,minimum air delivery 245 m³/min and service value ≥ 4.10 as per BEE 105 3008240 8.1.1.3 Power point wiring surface rigid P.V.C. conduit……Long point ..15 A 106 3009107 27.8.1.2 Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of C series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- Single pole MCB SP 6Amp to 32Amp 10kA rating 107 3008180 5.3.1 Circuit wiring2x2.5 Sq.mm. 108 3008201 5.3.2 4x2.5 Sq.mm. 109 3009447 31.7.3 Supply and fixing surface mounting LED down lighter, LED of 1 to 3Watt each assembled on single MCPCB, having color temp upto 6500K & having 50000 burning…. connection wire, testing etc. to complete the job. 7/8 Watt, color temp 3000-6500k as required. 110 3009464 31.11.3 Supplying and fixing flood light with high power LED of 3 to 6 Watt each assembled on single MCPCB and additional unique peanut lens on each LED, ....IP65 protection. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job. 60Watt, color temp 3000-6500k as required. 111 3009399 30.4.2 Supplying, erection and testing of approved make Fresh air fan AC 230-250 volts with connection and including frame bolt/anchor hole fasteners etc. complete finished and as required. 225 mm sweep bush type 112 3009121 27.8.3.2 Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of C series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- For Triple pole MCB TP 6Amp to 32Amp 10kA rating 113 3004746 2.6 Plinth Protection work , Earth work in excavation by mechanical means(Hydraulicexcavator) /manual meansoverareas(exceeding30cmin depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottomdisposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled andneatly dressed.(Noextraliftis payableif workisdoneby mechanical means) All kinds of soil. 114 3004808 4.1.2.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 40mm nominal size graded stone aggregate. M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate 115 3000100 2.27.1 Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete....With hard muram having CBR >12 % at under floors including watering, ramming and compacting 116 3005878 11.52 Providing and laying Antiskid floor tiles of any sizes, 12 mm thickness with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement with matching pigments etc., complete. 117 3006149 13.3.2 20 mm cement plaster of mix : 1:6 (1 cement : 6 sand) 118 3000145 40NSOR Brickwork in plinth & foundation of Boundary wall with fly ash lime bricks (FALG bricks) having 75 Kg per sq cm average compressive strength conforming to IS:12894-2002, in cement mortar 1:6 , including cost of all material, labour, T&P, taxes, transportation ,curing etc. complete as per direction of Engineer in charge. 119 3006929 18.7.3 Water Supply & Drainage works , CPVC pipes forexternal work..25 mm nominal outer dia .Pipes. 120 3006930 18.7.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,...32 mm nominal outer dia .Pipes. 121 3006034 12.32.2 Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion...110 mm diameter (minimum wall thickness 2.2mm) 122 3007373 19.31 Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design. 123 3007319 19.9.1.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With well burnt bricks 124 3004884 5.1.1 RCC upto plinth.M-20 Grade Concrete 125 3004897 5.9.3 Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform. 126 3004929 5.16.6 Reinforcement.Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 127 3007292 19.4.2 Unplasticised PVC pipe Below ground.160 mm diameter OD(min. wall thickness 4.0mm) 128 3004746 2.6 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil 129 3007132 18.13.1 Providing and fixing CPVC gate valve with knob of approved quality….25 mm nominal bore 130 3007133 18.13.2 Providing and fixing CPVC gate valve with knob of approved quality…32 mm nominal bore. 131 3007210 18.28 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank+K7078(Unit:-L= Litre) 132 3006149 13.3.2 Outer renovation & water proofing, Civil works , 20 mm cement plaster of mix : 1:6 (1 cement : 6 sand) 133 3006221 13.52 Finishing walls by any mechanical or manual means with Acrylic Smooth exterior paint (Economy Exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface 134 3006240 13.64 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. 135 3006929 18.7.3 CPVC pipes forexternal work..25 mm nominal outer dia .Pipes. 136 3006930 18.7.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,...32 mm nominal outer dia .Pipes. 137 3007524 22.14.1 Grading roof for receiving water proofing treatment with …..Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone 138 3007534 22.22 Water proofing treatment over Roof, Wall, Chajjas,, Balcony with fibre ,......(iv) The treated area should be cure with water for 48 hrs. by flooding the surface. (v) The final appearance of the coating will be milky white. All above operations to be done in order.(five years guarantee) 139 3004996 6.6.2 Brick work with bhatta, bricks in superstructure.Cement Mortar 1:6 (1 cement : 6 sand) 140 3006262 13.81 Providing and Applying Roto Wall finishing system being a dispersion of inorganic fillers, calcite, pure silica, quartz and broad spectrum fungicides stabilized by an acrylic co-polymer, to be applied by means of customized trowels (one for incorporating material on base and spreading and other for finishing) in single coat with a coating thickness of 2.0-2-2.5mm on a cured smooth level plaster without keying, by the approved applicator of manufacturer, of the approved shade as per directions for usage all inclusive including primer coat on the base 141 3006494 15.40.1 Dismantling G.I. pipes (external work).15 mm to 40 mm nominal bore 142 3009580 37.4 Earthing with copper earth plate 600mm X 600mm X 3mm thick including accessories and providing masonry encloser in cement mortar, cover plate having locking arrangement on the top and G.I. watering pipe 20mm dia 2.7 metre long etc. (but without charcoal or coke and salt) complete as required 143 3009581 37.5 Add extra for using salt and charcoal/coke for G.I. plate or copper plate earth electrode as required including excavation and refilling the pit in all type of soil, murrum 144 3007542 22.3 Providing & applying crack fill paste for crack filling up to 5 mm cracks.Widen the crack by putty knife in V/U shape & apply 1st priming coat of crack fill paste diluted with water in 1:1 proportion over the crack by brush. Apply 2nd coat with filling of crack fill paste when the surface is tacky but not dried completely with putty knife & spatula.After 4 hours of application 2nd coat apply 3rd coat of Crack fill paste. The work shall be carried out as recommended by the manufacturers specification & the direction of the Engineer-in-Charge 145 3006423 14.83.3 Providing andinjectingapproved grout in proportion recommended by the manufacturerinto cracks/honey-comb area of concrete/masonry by suitable gun/pumpatrequiredpressure includingcuttingofnipplesafter curing etc. complete as per directionsofEngineer-in-Charge. (Thepaymentshallbemadeon the basis of actual weight of approved grout injected.) : Stirrer mixed Acrylic Polymer (of approvedmake @2%ofweight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work 146 3006376 14.65 Providing and casting & repairing of excessively damaged members with micro-concrete at all levels with all leads & lift or as directed including formwork, centerting, scaffolding, and mixing, laying, levelling, and finishing including curing etc. complete (excluding steel reinforcement) 147 3006375 14.64 Chipping, Removing, Carefully loose plaster and Concrete work by low impact Hammer, Breaker without damaging the structure as Instructed by Engineer-in-Charge. 148 3006404 14.73 Repair to plaster of thickness 12mmto20mminpatches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plasteringthewall surfacewith whitecementbasedpolymer modifiedself curingmortar, includingdisposalofrubbish,all completeas perthedirectionof Engineer-In-Charge. 149 3004802 2.29 Supplying chemical emulsion in sealed containers including delivery as specified. (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) 150 3004804 2.30.2 Drilling plugging holes along existing external wallAlong the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. 151 3006147 13.2.2 Ground floor:- Rooms & Common spacerenovation work, Civil works , 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 152 3006156 13.8 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) 153 3006506 15.48 Dismantling old plaster or skirting raking out joints andcleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead 154 3006211 13.46 Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work 155 3006279 14.1 Repairs to plaster of thickness 12mm to 20mm in patches of area2.5 sq....ofrubbishto the dumping ground within 50metres lead:With cement mortar 1:4 (1 cement : 4 sand) 156 3006437 15.3 Demolishing R.C.C. workmanually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. 157 3006435 15.2.1 Demolishing cement concrete manually/by mechanical means including disposal..1:3:6 or richer 158 3006436 15.2.2 Demolishing cement concrete.1:4:8 or leaner 159 3006442 15.6.3 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. In cement mortar. 160 3006455 15.14.1 Dismantling doors, windows and clerestory windows(steel or wood) shutter including chowkhats, architrave, holdfastsetc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below 161 3006322 14.27 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 162 3006409 14.76.1 Chippingof unsound/weak concrete materialfrom slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussiontypeorof approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wirebrushesetc. anddisposalof debrisforalllead andliftsall complete as per direction of Engineer-In-Charge : 25 mm average thickness 163 3005751 21.1.1.2 Providing and fixing aluminium work for doors, windows, ….. (minimum thickness of powder coating 50 micron (fixed) 164 3007474 21.1.2.2 Providing and fixing aluminium work for doors, windows, …(minimum thickness of powder coating 50 micron) Movable 165 3003068 21.3.1 Providing and fixing glazing in aluminium door, window, …. With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) 166 3003069 21.3.2 Providing and fixing glazing in aluminium door, window, ...With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) 167 3004996 6.6.2 Brickworkwithwellbruntopen bhatta,bricks,crushing strengthnot less than 25kg / cm2 and water absorption notmorethan20%in superstructure above plinth level and upto floortwoleveli/ccuringetc complete.Cement Mortar 1:6 (1 cement : 6 sand) 168 3006206 13.41 Providing and applying white cement based putty of average thickness 1 mm, of ...only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. 169 3005875 11.49 ProvidingandfixingCeramicglazedwalltiles 300x450mmor more(havingthickness6to7 mm)of1stquality conforming toIS:15622of approvedmakeinallColours&shades,except burgundy, bottle green, black laid on 12mm thick bedofCementMortar1:3(1Cement:3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqmincluding pointing the joints with white cement and matching pigments etc., complete. 170 3001509 11.45 Providing and laying Ceramic glazed floor tiles 300x300mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS: 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20mm thick Cement Mortar 1:4 (1 Cement : 4 Sand) including pointing the joints with white cement and matching pigment etc. complete. 171 3006451 15.11.1 Dismantling tile/ kota /marble/ Granite work.Upto 25mm thick. 172 3004838 4.1.2.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 40mm nominal size graded stone aggregate. M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate 173 3005271 9.43.2 Providing and fixing M.S. grills ofrequired pattern in frames of windows etc. withM.S.flats,squareorroundbars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. 174 3005212 9.18.2 Providing and fixing ISI marked flush door shuttersconformingto IS:2202(PartI) decorativetype, core of block board constructionwithframeof1stclasshard wood and well matched teak 3 ply veneeringwith vertical grainsor cross bandsandfaceveneersonbothfacesof shutter. 30 mm thickincludingISImarked Stainless Steel butt hinges with necessary screws. 175 3005145 9.1.2 Providing wood work in frames of doors, windows,clerestorywindows and other frames, wrought framed and fixed in position withholdfastlugsorwithdash fastenersofrequireddia andlength(hold fast lugs or dash fastener shall be paid for separately). Sal wood 176 3000145 40 NSOR Brickwork in plinth & foundation of Boundary wall with fly ash lime bricks (FALG bricks) having 75 Kg per sq cm average compressive strength conforming to IS:12894-2002, in cement mortar 1:6 , including cost of all material, labour, T&P, taxes, transportation ,curing etc. complete as per direction of Engineer in charge. 177 3004834 4.1.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering…..M-15 – Grade concrete 178 3006836 17.75 Providing and fixing CP brass soap dish of approved quality and make 179 3006809 17.61 Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet. 180 300682417.68.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame Rectangular shape 453x357m 181 3005825 11.22.2 Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-inCharge.Granite fine grained dark crystal of other colours and various patterns. 182 3006141 12.83.1 Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T- Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main T. The system should rest on periphery walls/partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) 183 3005910 11.72.2 Chamfered edge cement concrete paver blocks over...60 mm thick C.C. paver block of M-35 grade 184 3000140 37NSOR Providing & Fixing in position LDPE Film of 150 micron (0.15 mm ) , ISI mark- 2508 (Grade 231) , including heat sealed joints at ends as per IS 9698 including cost of all material, labour, T&P, taxes, transportation etc. complete as directed by Engineer in charge 185 3005483 9.134.2 Providing andFixing decorative high pressurelaminated sheetofplain/wood grainingloss/matt/suede finish with highdensityprotectivesurfacelayerand reversesideof adhesivebondingquality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 1.0 mm thick. 186 3005326 9.66.1 Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm 187 3009431 31.3.3 Electrical works , Tube light LED 1 X 18Watt, Integral i/c batten aluminium body, PC diffuser. 188 3009392 30.1.2 Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy ,hanging shackle,….Ceiling Fan ( ISI marked )-1200 mm Sweep,minimum air delivery 245 m³/min and service value ≥ 4.10 as per BEE 189 3008200 5.3.1 Circuit wiring2x2.5 Sq.mm. 190 3008201 5.3.2 4x2.5 Sq.mm. 191 3009447 31.7.3 Supply and fixing surface mounting LED down lighter, LED of 1 to 3Watt each assembled on single MCPCB, having color temp upto 6500K & having 50000 burning…. connection wire, testing etc. to complete the job. 7/8 Watt, color temp 3000-6500k as required. 192 3009464 31.11.3 Supplying and fixing flood light with high power LED of 3 to 6 Watt each assembled on single MCPCB and additional unique peanut lens on each LED, ....IP65 protection. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job. 60Watt, color temp 3000-6500k as required. 193 3009399 30.4.2 Supplying, erection and testing of approved make Fresh air fan AC 230-250 volts with connection and including frame bolt/anchor hole fasteners etc. complete finished and as required. 225 mm sweep bush type 194 3008144 4.1.1.1 Point wiring (excluding metallic switch box & sheet but including switches…..Light point/fan points. Primary short point. (Using modular accessories) 195 3008145 4.1.1.2 Point wiring (excluding metallic switch box & sheet but including switches…..Light point/fan points. Primary medium point. (Using modular accessories) 196 3008146 4.1.1.3 Point wiring (excluding metallic switch box & sheet but including switches…... Light point/fan points. Primary long point. (Using modular accessories) 197 3008152 4.1.3.3 Point wiring (excluding metallic switch box & sheet but including switches….3 Pin 6 Amp socket outlet on separate board Long point. (Using modular accessories) 198 3008155 4.1.4.3 Point wiringwith 1.5sq. mm. PVC insulated cable FRLS with copper …..Call bell/buzzer points Long point. (Using modular accessories) 199 3008158 4.1.5.3 Point wiring with 1.5sq. mm. PVC insulated cable FRLS with …..Twin control light points Long point. (Using modular accessories) 200 3008159 4.2. Point wiring for 3 pin 6 Amp. socket outlet point with 1.5sq. mm. PVC insulated cable FRLS with copper…...conduit with required materials as per specification on same board.(Using modular accessories) 201 3008260 9.1.1.2 Point wiring for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable…. On separate board Medium point (Using modular accessories) 202 3008261 9.1.1.3 Point wiring for 3 Pin 16 Amp. socket outlet point with 4sq. mm. ….. On separate board Long point (Using modular accessories) 203 3008265 9.2 Same board switch & socket 16 Amp./S.S. combined 20/16/6 Amp (Using modular accessories) 204 3008344 16.1.2 Supply and fixing PVC conduit ISI marked FRLS along with the accessories in concealed system etc. as required PVC. conduit 25 mm (HMS) 205 3008363 18.2.4 S?f of approved make modular type G.I. metal box 1.2mm minimum thick …... G.I box 6 module. 206 3008364 18.2.5 Supplying and fixing of approved make modular type G.I. metal box 1.2mm ……..8/9 Module metal box 207 3008365 18.2.6 Supplying and fixing of approved make modular type G.I. metal box 1.2mm ….. 12 Module metal box 208 3008369 18.3.2 Supplying and fixing of approved make modular type PVC box minimum depth 40mm and minimum thickness 2mm with modular base and cover plate including fixing on surface etc. as required for:-3 Module PVC box 209 3008375 19.1.1.1 Supplying and drawing single core PVC insulated cable...concealed as per specification. 1.5 sq. mm. wire 1 X 1.5 sq. mm. 210 3008376 19.1.1.2 Supplying and drawing single core PVC insulated cable FRLS .... 1.5 sq. mm. wire 2 X 1.5 sq. mm. 211 3008386 19.1.2.2 Supplying and drawing single core PVC insulated cable FRLS …..2.5 sq. mm. wire 2 X 2.5 sq. mm. 212 3009107 27.8.1.2 Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of C series with short circuit indication, …..Single pole MCB SP 6Amp to 32Amp 10kA rating 213 3009130 27.8.4.4 Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of C series ...Four pole MCB FP 50 Amp to 63 Amp 10kA rating 214 3009168 27.11.7 Supply of approved make powder coated sheet steel encloser SPN MCB DB inclusive of busbar, neutral bar, earth bar, connection copper wire not less than 16 sq.mm & two earth terminals etc. complete as per IS:13032(exclusive of MCB & isolator)- 16 Way double door IP 43 protection 215 3009392 30.1.2 Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts including connections with all necessary material complete of approved as required confirming to IS :374/2019 with upto date amendments.Ceiling Fan (ISI marked)-1200 mm Sweep, with minimum air delivery 210 m*3/min and service value >= 4.00 as per BEE.. 216 3009405 30.5.3 Supplying and fixing of deluxe fresh air fan with louvers (ventilating fan) with self.closing louvers of decorative PVC blades mounting square frame of approved make complete with all necessary material as required. 250mm RPM1300/1400 217 3007221 18.37Sanitary /Water supply works , Providing and fixing C.P. brass pillar cock approved quality and make conforming to IS: specification. 15 mm nominal bore 125 mm long foam flow. 218 3007223 18.39 Providing and fixing C.P. brass wall mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. 219 3007230 18.44.2 Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore….122 mm long weighing not less than 99 gm 220 3006795 17.58.1 Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing…75 mm diameter 221 3007620 25.7.1 Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with C.I. Brackets, 15 mm C. P. wall mounted pressmatic pillar cock auto closing system (decol technology), 15mm quarter turn angular stop cock, 32 mm C.P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required:.White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 160x580x450 mm with basin mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) 222 3006622 17.11.4 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap…. 223 3006845 17.82 Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. 224 3006839 17.78.1 Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification….100 mm dia 225 3006836 17.75 Providing and fixing CP brass soap dish of approved quality and make 226 3006809 17.61 Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outle 227 3006824 17.68.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame Rectangular shape 453x357m 228 3007219 18.35 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore 229 3007604 25.2.1 Providing and fixing white vitreous china pedestal type Anti germ Fluoro-Polymer Coated Water Closet with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propeline) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. :.Anti-germ Fluoro-Polymer Coated (nano coating) European W. C. with solid poly propelyne made soft closing seat cover (Premium Range) 230 3006600 17.2.3 Providing and fixing AISI-304 (18/8) European type WC instead of white vitreous china pedestal type water closet. 231 3006930 18.7.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,...32 mm nominal outer dia .Pipes. 232 3006605 17.6.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :.One urinal basin with 5 litre white P.V.C. automatic flushing cistern. 233 3006147 13.2.2 Civil Works , First floor rooms & Common spacerenovation work, 15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 234 3006156 13.8 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) 235 3006437 15.3 Demolishing R.C.C. workmanually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. 236 3006435 15.2.1 Demolishing cement concrete manually/by mechanical means including disposal..1:3:6 or richer 237 3006442 15.6.3 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. In cement mortar. 238 3006506 15.48 Dismantling old plaster or skirting raking out joints andcleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead 239 3006455 15.14.1 Dismantling doors, windows and clerestory windows(steel or wood) shutter including chowkhats, architrave, holdfastsetc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below 240 3006322 14.27 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 241 3006409 14.76.3 Chippingof unsound/weak concrete materialfrom slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussiontypeorof approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wirebrushesetc. anddisposalof debrisforalllead andliftsall complete as per direction of Engineer-In-Charge : 25 mm average thickness 242 3005751 21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z …. Powder coated aluminium (minimum thickness of powder coating 50 micron (fixed) 243 3007474 21.1.2.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z …. Powder coated aluminium (minimum thickness of powder coating 50 micron) Movable 244 3003068 21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. .... (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) 245 3003069 21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. .... (Cost of aluminium snap beading shall be paid in basic item) :With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) 246 3004996 6.6.2 Brickworkwithwellbruntopen bhatta,bricks,crushing strengthnot less than 25kg / cm2 and water absorption notmorethan20%in superstructure above plinth level and upto floortwoleveli/ccuringetc complete.Cement Mortar 1:6 (1 cement : 6 sand) 247 3006206 13.41 Providing and applying white cement based putty of average thickness 1 mm, of ...only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. 248 3006279 14.1 Repairs to plaster of thickness 12mm to 20mm in patches of area2.5 sq....ofrubbishto the dumping ground within 50metres lead:With cement mortar 1:4 (1 cement : 4 sand) 249 3006211 13.46 Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work 250 3005875 11.49 ProvidingandfixingCeramicglazedwalltiles 300x450mmor more(havingthickness6to7 mm)of1stquality conforming toIS:15622of approvedmakeinallColours&shades,except burgundy, bottle green, black laid on 12mm thick bedofCementMortar1:3(1Cement:3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqmincluding pointing the joints with white cement and matching pigments etc., complete. 251 3001509 11.45 Providing and laying Ceramic glazed floor tiles 300x300mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS: 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20mm thick Cement Mortar 1:4 (1 Cement : 4 Sand) including pointing the joints with white cement and matching pigment etc. complete. 252 3006451 15.11.1 Dismantling tile/ kota /marble/ Granite work.Upto 25mm thick. 253 3004838 4.1.2.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 40mm nominal size graded stone aggregate. M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate 254 3005271 9.43.2 Providing and fixing M.S. grills ofrequired pattern in frames of windows etc. withM.S.flats,squareorroundbars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. 255 3005212 9.18.2 Providing and fixing ISI marked flush door shuttersconformingto IS:2202(PartI) decorativetype, core of block board constructionwithframeof1stclasshard wood and well matched teak 3 ply veneeringwith vertical grainsor cross bandsandfaceveneersonbothfacesof shutter. 30 mm thickincludingISImarked Stainless Steel butt hinges with necessary screws. 256 3005145 9.1.2 Providing wood work in frames of doors, windows,clerestorywindows and other frames, wrought framed and fixed in position withholdfastlugsorwithdash fastenersofrequireddia andlength(hold fast lugs or dash fastener shall be paid for separately). Sal wood 257 3000145 40 NSOR Brickwork in plinth & foundation of Boundary wall with fly ash lime bricks (FALG bricks) having 75 Kg per sq cm average compressive strength conforming to IS:12894-2002, in cement mortar 1:6 , including cost of all material, labour, T&P, taxes, transportation ,curing etc. complete as per direction of Engineer in charge. 258 3004834 4.1.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering…..M-15 – Grade concrete 259 3006836 17.75 Providing and fixing CP brass soap dish of approved quality and make 260 3006809 17.61 Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet. 261 300682417.68.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame Rectangular shape 453x357m 262 3005825 11.22.2.1 Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-inCharge.Granite fine grained dark crystal of other colours and various patterns. 263 3006141 12.83.1 Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T- Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main T. The system should rest on periphery walls/partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) 264 3006240 13.64 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. 265 3009431 31.3.3 Electrical works, Tube light LED 1 X 18Watt, Integral i/c batten aluminium body, PC diffuser. 266 3009392 30.1.2 Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy ,hanging shackle,….Ceiling Fan ( ISI marked )-1200 mm Sweep,minimum air delivery 245 m³/min and service value ≥ 4.10 as per BEE 267 3008200 5.3.1 Circuit wiring2x2.5 Sq.mm. 268 3008201 5.3.2 4x2.5 Sq.mm. 269 3009447 31.7.3 Supply and fixing surface mounting LED down lighter, LED of 1 to 3Watt each assembled on single MCPCB, having color temp upto 6500K & having 50000 burning…. connection wire, testing etc. to complete the job. 7/8 Watt, color temp 3000-6500k as required. 270 3009464 31.11.3 Supplying and fixing flood light with high power LED of 3 to 6 Watt each assembled on single MCPCB and additional unique peanut lens on each LED, ....IP65 protection. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job. 60Watt, color temp 3000-6500k as required. 271 3009399 30.4.2 Supplying, erection and testing of approved make Fresh air fan AC 230-250 volts with connection and including frame bolt/anchor hole fasteners etc. complete finished and as required. 225 mm sweep bush type 272 3008144 4.1.1.1 Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) ……. Primary short point. (Using flush type normal accessories) 273 3008145 4.1.1.2 Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) …….Primary medium point. (Using flush type normal accessories) 274 3008146 4.1.1.3 Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) …….. Primary long point. (Using flush type normal accessories) 275 3008152 4.1.3.3 Point wiring, …….3 Pin 6 Amp socket outlet on separate board Long point. (Using modular accessories) 276 3008155 4.1.4.3 Point wiring (excluding metallic switch box & sheet but including switches, ……..Call bell/buzzer points Long point. (Using modular accessories) 277 3008158 4.1.5.3 Point wiring (excluding metallic switch box & sheet but including switches, ….Twin control light points Long point. (Using flush type normal accessories) 278 3008159 4.2 Point wiring (excluding metallic switch box & sheet but including switches, sockets) for 3 pin 6 Amp. socket outlet point with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit with required materials as per specification on same board.(Using flush type normal accessories) 279 3008260 9.1.1.2 Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. …... On separate board Medium point (Using modular accessories) 280 3008261 9.1.1.3 Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. ….. On separate board Long point (Using modular accessories) 281 3008265 9.2 Same board switch & socket 16 Amp./S.S. combined 20/16/6 Amp (Using modular accessories) 282 3008344 16.1.2 Supply and fixing PVC conduit ISI marked FRLS along with the accessories in concealed system etc. as required PVC. conduit 25 mm (HMS) 283 3008363 18.2.4 S/f of approved make modular type G.I. metal box 1.2mm minimum thick …... G.I box 6 module. 284 3008364 18.2.5 Supplying and fixing of approved make modular type G.I. metal box 1.2mm ……..8/9 Module metal box 285 3008365 18.2.6 Supplying and fixing of approved make modular type G.I. metal box 1.2mm ….. 12 Module metal box 286 3008369 18.3.2 Supplying and fixing of approved ….with modular base and cover plate including fixing on surface etc. as required for:-3 Module PVC box 287 3008375 19.1.1.1 Supplying and drawing single core PVC insulated cable FRLS with copper multi strand conductor ISI marked in existing rigid PVC casing and capping/conduit in surface or concealed as per specification. 1.5 sq. mm. wire 1 X 1.5 sq. mm. 288 3008376 19.1.1.2 Supplying and drawing single core PVC insulated cable FRLS with copper ……... wire 2 X 1.5 sq. mm. 289 3008386 19.1.2.2 Supplying and drawing single core PVC insulated cable FRLS with copper …….wire 2 X 2.5 sq. mm. 290 3009107 27.8.1.2 Supply of ISI marked and accepted standard of miniature circuit breaker ……. Single pole MCB SP 6Amp to 32Amp 10kA rating 291 3009130 27.8.4.4 Supply of ISI marked and accepted standard of miniature circuit breaker……. Four pole MCB FP 50 Amp to 63 Amp 10kA rating 292 3009168 27.11.7 Supply of approved make powder coated sheet steel encloser SPN MCB DB inclusive of busbar, neutral bar, earth bar, connection copper wire not less than 16 sq.mm & two earth terminals etc. complete as per IS:13032(exclusive of MCB & isolator)- 16 Way double door IP 43 protection 293 3009392 30.1.2 Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts including connections with all necessary material complete of approved as required confirming to IS :374/2019 with upto date amendments.Ceiling Fan (ISI marked)-1200 mm Sweep, with minimum air delivery 210 m*3/min and service value >= 4.00 as per BEE.. 294 3009405 30.5.3 Supplying and fixing of deluxe fresh air fan with louvers (ventilating fan) with self.closing louvers of decorative PVC blades mounting square frame of approved make complete with all necessary material as required. 250mm RPM1300/1400 295 3007221 18.37Sanitary & water Supply works, Providing and fixing C.P. brass pillar cock approved quality and make conforming to IS: specification. 15 mm nominal bore 125 mm long foam flow. 296 3007223 18.39 Providing and fixing C.P. brass wall mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore. 297 3007230 18.44.2 Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore….122 mm long weighing not less than 99 gm 298 3007620 25.7.1 Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with C.I. Brackets, 15 mm C. P. wall mounted pressmatic pillar cock auto closing system (decol technology), 15mm quarter turn angular stop cock, 32 mm C.P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required:.White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 160x580x450 mm with basin mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) 299 3006795 17.58.1 Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing…75 mm diameter 300 3006622 17.11.4 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap…. 301 3006845 17.82 Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. 302 3006839 17.78.1 Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification….100 mm dia 303 3006836 17.75 Providing and fixing CP brass soap dish of approved quality and make 304 3006809 17.61 Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outle 305 3006824 17.68.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame Rectangular shape 453x357m 306 3007219 18.35 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore 307 3007620 25.7.1 Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with C.I. Brackets, 15 mm C. P. wall mounted pressmatic pillar cock auto closing system (decol technology), 15mm quarter turn angular stop cock, 32 mm C.P. brass made waste coupling length 130mm and 32 mm C.P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required:.White Vetrious China Anti germ Fluoro-Polymer Coated Wash Basin Size 160x580x450 mm with basin mounted pressmatic pillar cock auto closing system (decol technology). (Premium Range) 308 3007604 25.2.1 Providing and fixing white vitreous china pedestal type Anti germ Fluoro-Polymer Coated Water Closet with soft closing seat cover, and 7.2 litre Low level slim dual flushing, PP (Poly Propeline) made 80 mm thick concealed flushing cistern, flushing capacity 3 litre/6 litre, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required. :.Anti-germ Fluoro-Polymer Coated (nano coating) European W. C. with solid poly propelyne made soft closing seat cover (Premium Range) 309 3006600 17.2.3 Providing and fixing AISI-304 (18/8) European type WC instead of white vitreous china pedestal type water closet. 310 3006930 18.7.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,...32 mm nominal outer dia .Pipes. 311 3006605 17.6.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :.One urinal basin with 5 litre white P.V.C. automatic flushing cistern. 312 3004746 2.6 Road work, Earth work in excavation by mechanical means(Hydraulicexcavator) /manual meansoverareas(exceeding30cmin depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottomdisposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled andneatly dressed.(Noextraliftis payableif workisdoneby mechanical means) All kinds of soil. 313 3011193,NSOR 251(b) (Tack Coat) Providing and applying tack coat with low viscosity bitumen of VG 10 grade using bitumen pressure sprayer on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications.@0.30 kg per sqm (dry & hungry bituminous surfaces /granular surfaces treated with primer) 314 3011199, NSOR 252 (d) (Bituminous Macadam) Providing and laying bituminous macadam using crushed aggregates of specified grading premixed with bituminous binder,transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction and as per clause 504 of specifications.for GradingII(19 mm nominal size) bitumen content 3.5% 315 3011203, NSOR 255 (a) (Seal Coat) Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats all complete as per clause 511 of Case - I : Type A Providing and laying of liquid seal coat comprising of an application of layer of bitumen binder followed by a caver of story chips. All complete as per clause 511 of specification.
