|
| 1 | Repair to pot holes any description n.exc 1.00 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25mm in depth,making good by applying tack coat @5kg per 10sqm,putting in premix as specified for thin bituminous carpet (2cm thick) well rammed and sealed with premixed sand coat (6.8kg of binder with 0.06 cum of sand), again well rammed including supply of premix binder and sand) depth of pothole n exc 30mm filling in screened & graded road metal, watering and well ramming complete all as specfied |
| 2 | M&L for preparing black top surfacesby brushing with wire brushes for removing caked mud,etc,sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt or with mechanical air compressor etc.complete all as specified and as directed by Eng-in Charge. . |
| 3 | M&L for applying evenly a priming/tack coat at the rate of 10 Kg per ten sqm (using paving bitumen VG 10 grade) complete all as specified and as directed by Eng-in Charge. . |
| 4 | M&L Bituminous premix semi dense asphaltic concrete 30mm thick consolidated thickness with 5.5% binder (using paving bitumen VG-30)content by weight of total mix, rolled and compacted to required camber and gradient complete all as specified and directed. |
| 5 | Scarifying of picking gravelled macadam for bituminous macadam surfaces in area n.exc 400 Sqm and n.exc. 100mm deep complete all as specified and as directed by Engineer-in-charge.. |
| 6 | M&L Premix, bituminous, macadam laid/rolled and compacted to required gradient and camber (Consolidated thickness 75 mm or more) using paving bitumen (VG-30 Grade) of any penetration as binder content of 4% by weight of total mix, complete all as specified and directed by Engr-in-Charge. |
| 7 | M & L for preparing bituminous surfaces of road and marking 2 mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed |
| 8 | Supply and fixsolar cat eye aluminum alloy shall (100% waterroofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directedMake : Dark eye/Road star or equivalent |
| 9 | Supply and fixing solar delineator light,dimension 70x70x100mm, direction 360 degree,round light protected with MS mesh,fitted on45/50 mm dia mild steel pipe of 1000 mm (200mm below GL and 800mm above GL)height,powder coatedincluding embedding in PCC 1:2:4(300x300x450mm) type B1 complete all as specified and directedMake : Dark eye/Road star or equivalent |
| 10 | Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 3120.00 and any other reduction if any from quoted amount. |
