|
| 1 | SCHEDULE - A1 Civil works |
| 2 | 1.Dismantling and removing the existing damagedAC Corrugated roofing sheets from the existing shed roof portionwithout disburing adjacent structures including conveying and depositing the debris within a lead of 50m at ground level for disposal, all as directed including all labour, tools, equipments, scaffolding, transport, fuel, etc., complete. |
| 3 | 2.Dismantling and removing the existing Structural members such as rails, M.S Angles from the existing shed roof portionwithout disburing adjacent structures, including hand over the unserviceable materials to RSO yardall as directed including all labour, tools, equipments, scaffolding, transport, fuel, etc., complete. |
| 4 | 3.Dismantling and removing thebrick work manually/by mechanical meansin Cement Mortar to the required size and shape at all height/levelwherever requiredwithoutdamaging the nearby structures including collecting andbringingdown the debris to the ground leveland depositing the debris within a lead of 50m for disposingall as specified andas directed at site, including all all labour, tools, tackles, equipments, fuel, scaffolding, etc., complete |
| 5 | 4.Dismantling and removing the existing wornout wooden/PVC/Steel/aluminium doors, windows, ventilator of area less than3Sqm including frame and MS hold fast if any embedded in the masonry/ concrete without damaging the structures near by and stacking the unserviceable materials within a lead of 50m for disposal including transporting and handing over the unserviceable to the RSD yard within a lead 3Km all as per relevant specification and as directed at site and making good the disturbed portions with cement mortar including all labour, scaffolding, tools, equipments, transport, fuel etc., complete |
| 6 | 5.Dismantling the existing rich mix concrete flooring and wherever required without damaging the structures nearby including collecting and depositing the debris within a lead of 50m for disposal all as directed including all labour, tools, tackles, equipments, etc., complete. |
| 7 | 6.Dismantling the existing lean mix concrete flooring and wherever required without damaging the structures nearby including collecting and depositing the debris within a lead of 50m for disposal all as directed including all labour, tools, tackles, equipments, etc., complete. |
| 8 | 7.Dismantling andremoving the existing wall/floor tiles in Cement mortar to therequired thick wherever necessary without damaging the structures near by including collecting and depositing the debris at ground level level with in a lead of 50m for disposal all as per relevant specification and as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. |
| 9 | 8.Earthwork excavation upto 1.5m by manually/mechanically in ordinary soil, sand, clay, mixed with roots, boulders, weighing individually less than 250 kg. debris, rubbish etc., as existing at site of work up to 1.5m depth forfoundation and where ever required andas directed at site including dressing of sides, ramming of bottom etc., dewatering if any as specified under relevant specifications, depositing the excavated earth within a lead of 50m all asper direction of Engineer-in-charge including shoring, shuttering, labour, tools, tackles, equipments, fuel, etc., complete. |
| 10 | 9.Providing and laying of PCC 1:4:8 (1 cement : 4 crushed stone sand : 8 hard granite graded stone aggregate 40mm nominal size)in volumetric proportionsfor foundation/levelling course consolidated including necessary excavation, levelling & dressing & finishing the top smooth all as per relevant specification as directed at siteincluding cement, all labour, materials, tools, equipments,etc., complete |
| 11 | 10.Providing and layingPlain Cement Concrete of mix 1:1.5:3 (1 cement : 1.5 crushed stone sand : 3 hardgranitegraded stone aggregate of 20 mm nominal size) in volumetric proportions for flooring concrete consolidated including necessary excavation, levelling & dressing & finishing the top smooth includingmixing,transporting, placing, curing all as per relevant specification as directed at siteincluding cement, all labour, materials, tools, equipments, fuel, etc., complete |
| 12 | 11.Supplying, fabricating and erecting the Structural steel work fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer including necessary bolts & nuts and welding the joints to erect the shed all as directed at site of work including one coat of primer including all materials, scaffolding, labour, tools, transport, equipments, fuel , etc., complete.Note:1.The payment is based on the weight of the MS section, MSbase plate etc., as fabricated.2.The weighment will made at site or any other place as approved by the site engineer. Necessary charges for transport, weighment. etc., will be borne by the contractor. |
| 13 | 12.Providing and fixing Galvanised steel corrugated sheets 0.63mm thick with zinc coating not less than 275gm/m² for Roof portion and side vertical cladding portionto the required sizeand fixing in proper positionwith necessaryBolts, nuts, screws, etc andall accessories, all as per drawings, relevant specificationsand as directed at site of work includingproviding scaffolding, all materials, labour, tools, equipments, transport, fuel, safety helmets, safety belts, etc., complete. |
| 14 | 13.Providing Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5for foundation in CM 1:5 (1 cement : 5 crushed stone sand) including making horizontal and vertical grooves 10mm wide 12mm deep complete and wherever required allas directed at site, including cement, all abour, materials, scafolding, tools, curing, equipments, etc., complete. |
| 15 | 14.Providing Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor II level in CM 1:5 (1 cement : 5 crushed stone sand) including making horizontal and vertical grooves 10mm wide 12mm deep complete and wherever required allas directed at site, including cement, all abour, materials, scafolding, tools, curing, equipments, etc., complete. |
| 16 | 15.Providing Half Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 for super structure walls in partition in CM 1:4 (1 cement : 4 crushed stone sand) and wherever requiredallas directed at site, including cement, all labour, materials, scafolding, tools, curing, equipments, etc., complete. |
| 17 | 16.Providing and laying of pre polished Granite stone slab of all colour and texture except black, Cherry/Ruby red 18mm thickness granite slab of approved colour and pattern of required size including nosing the edges of slab to the required finish for cupboard slabs and wherever required set in cement mortar 1:4 (1cement : 4 crushed stone sand) 20mm thick fixed with neat cement slurry and joints neatly pointed with white cement added with pigment to match the colour of the Granite slab, curing, all as per relevant specification and as directed at site of work including all materials, cement, labour, tools, equipments, transport, fuel, etc. complete. |
| 18 | 17.Providing Shuttering for RCC lintel using wooden/steel shuttering materials, including removing form work after completion of concrete works all as per relevant specifications, all as directed at site of work including scaffolding, shuttering, transporting,all labour, materials, equipments, tools, plants, fuel, etc., complete. |
| 19 | 18.Providing Reinforced cement concrete of mix 1:1.5:3, in volumetric proportions (1 cement : 1.5 crushed stone.sand : 3 hard granite graded stone aggregate of 20 mm nominal size) for R.C.C works for lintel all as per relevant specifications and as directed at site of work including scaffolding, mixing, transporting, placing, vibrating, curing, all labour, materials, equipments, tools, plants, fuel, etc., complete. Note:Supplying and fabrication of steel reinforcement will be measured and paid separately under the relevant item. |
| 20 | 19.Preparing the surfaces of wall and plastering in Cement Mortar 1:5 (1cement : 5 crushed stone sand) 12 mm thick wherever required to the required finish, curing etc., all as directed at site including cement, alllabour, materials, tools, equipments, scaffolding, etc. complete. |
| 21 | 20.Providing and fixing in position Second class teak wood wrought main frames of finished size 95x70mm for doors with necessary M.S. hold fasts/clamps fixed suitably to the masonry/concrete including cutting pockets and grouting with P.C.C.1:3:6 (1 Cement : 3 Crushed stone sand : 6 graded down stone aggregate of 20mm down size) in volumetric proportions, curing and applying two coats of oil type wood preservative of approved brand and manufacture, complete abutting against masonry/concrete as per direction of Engineer-in-chargeincluding all labour, materials, tools, equipments, etc., complete. |
| 22 | 21.Providing and fixing Second class teak wood,30mm thick panelled shutters for doors/windows and fixing with butt hinges of required size with necessary screws, including panelling 16mm tk with single leaves/double leaves all complete adopting Port Authority\"s manual anddirection of Engineer-in-charge including all labour, materials, tools, equipments, etc., complete. Note:Necessary fixtures like butt hinges, tower bolts, etc.,will be paid under relevant item of this schedule. |
| 23 | 22.Providing and fixing in position Second class teak wood wrought main frames of finished size70x32.50mm for cupboard main frames with necessary M.S. hold fasts/clamps fixed suitably to the masonry/concrete including cutting pockets and grouting with P.C.C.1:3:6 (1 Cement : 3 Crushed stone sand : 6 graded down stone aggregate of 20mm down size) in volumetric proportions, curing and applying two coats of oil type wood preservative of approved brand and manufacture, complete as per direction of Engineer-in-charge including all labour, materials, tools, equipments, etc., complete. |
| 24 | 23.Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc.in proper position all as per relevant specifications and as directed including all materials, labour, tools, equipments etc., complete.Note:Necessary fixtures like butt hinges, tower bolts, etc.,will be paid under relevant item of this schedule. |
| 25 | 24.Supplying and fixing WPC frames of size 45x70mm for toilet doors and wherever required of approved quality all as directed at site of work including all labours, materials, tools, equipments etc., complete. |
| 26 | 25.Supplying and fixing WPC shutters double side printed teak wood colour 30mm thick for toilet doors and wherever required of approved quality all as directed at site of work including all labours, materials , tools equipments etc., complete. Note: Door fittings shall be paid seperately under relevant item. |
| 27 | 26.Providing and fixing metro or equivalent C.P. brass fittings in toilets in sound working condition and aluminium fittings ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws allas directed including all materials, labour, tools, equipments, etc., complete.(a) Brass hinges 150mm long |
| 28 | 26(b).Brass Handles 250mm long |
| 29 | 26(c).Brass tower bolts 3000mm long |
| 30 | 26(d).Brass Aldrop 250mm long |
| 31 | 26(e).Brass door stopper |
| 32 | 26(f).Brass hinges 100mm long |
| 33 | 26(g).Brass handles 100mm long |
| 34 | 26(h).Brass cupboard lock |
| 35 | 26(i).Aluminium Hinges 150mm long |
| 36 | 26(j).Aluminium tower bolt 150mm long |
| 37 | 26(k).Aluminium aldrop 250mm long |
| 38 | 26(l).Brass baby latch |
| 39 | 27(a).Providing and fixing Badminton Wooden flooring Made up of well seasoned Kilned, Anti termite coated, wood borer coated Pine wood rafter of size length 4 to 8 feet , width 70mm ,Thickness 45mm and fitted with tongue & groove pattern planks of length 2 to 5 feet, 3to 4 inches width, 21mm thickness including providing PP Sheet for weather proofing, 19mm resilient rubber cushion pads to a total thickness of 82mmof approved quality all as per relevant specifications and drawings, all as directed at site of work including all labours, materials , tools equipments, transport, etc., complete. |
| 40 | 27(b).Providing and fixing Synthetic badminton court flooring of matt thickness 4.50mm of size 49feet x 23.50feet over wooden court area (yonex or equivalent brand)all as per relevant specifications and as directed, including transporting, all materials, labour, tools, plants, equipments, fuel, etc., complete. |
| 41 | 28.Providing and fixing cushion flooring 10mm thick made with B Grade rubber for flooring with adhesives except wooden court area all as per relevant specifications and as directed, including transporting, all materials, labour, tools, plants, equipments, fuel, etc., complete. |
| 42 | 29.Providing and fixing vinyl flooring 1mm thick for flooring with adhesives except wooden court area over cushion matt all as per relevant specifications and as directed, including transporting, all materials, labour, tools, plants, equipments, fuel, etc., complete. |
| 43 | 30.Supplying and fixing of Badmiton post movable in the indoor stadium with net all as per relevant specifications and as directed, including transporting, all materials, labour, tools, plants, equipments, fuel, etc., complete. |
| 44 | 31.Providing and laying Ceramic glazed wall dadoing tiles of size 600x300mm with good quality ceramic tiles (Jhonson/Kajaria/Nitco or other approved brands) (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, in a bedding mortar of 12mm thick in C.M 1:3 (1 cement : 3 crushed stone sand) and fixing with neat cement slurry and joints neatly pointed withwhite cement added with pigment to match the colour of the tiles to a required height as directed at siteincluding cement and all other materials, labour, tools, equipments, scaffolding, etc complete. |
| 45 | 32.Providing and laying Ceramic glazed floor tiles of size 300x300mm with good quality, Anti-skid ceramic tiles (Jhonson/Kajaria/Nitco or other approved brands) (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20mm thick bed of cement mortar 1:4 (1 Cement : 4 crushed stone sand) jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments including pointing the joints with white cement and matching pigments etc., complete., and as directed at site, including all materials, labour, tools, equipments, , etc., complete. |
| 46 | 33.Providing and laying Vitrified tiles for flooring conforming to IS :15622 (thickness to be specified by the manufacturer) with good quality (Jhonson/Kajaria/Nitco or other approved brands) of size 600mmx600mm or of nearest approved size andcolour match with existing and water absorption less than 0.08%, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 crushed stone sand) jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments set including pointing in white cement mixed with pigment of matching shade complete., including all materials, labour, brushes, tools, equipment, plants, transport, fuel, etc., complete. |
| 47 | 34.Providing, casting and fixing in position of RCC precast cover slab 75mm thick incement concrete of mix 1:1.5:3 involumetric proportions (1 cement : 1.5 crushed stone sand : 3 hard granite graded stone aggregate of 20mm nominal size) inculding finishing the exposed surface, in cement mortor 1:3 (1cement 3 crused stone sand) 6 to 10mm thick with a floting coat of neat cement punning all as per relevant specification and as directed at siteincluding mixing, transporting, placing, ramming, consolidating, etc. including scafolding,shuttering, vibrating including cement, all labour, materials, curing, equipment, tools, etc. complete.Note: Supplying and fabrication of steel reinforcement will be measured and paid separately under the relevant item. |
| 48 | 35.Providing and laying offirst quality anti skid (matt finish) ceramic tiles for flooring of make (Johnson/Kajaria) of size 400mmx400mm or nearest size as available in the market of nominalthickness more than 7mm of approved quality and colour for passages and wherever requiredset in cement mortar 1:4 (1cement : 4 crushed stone.sand) 20mm thick fixed with neat cement slurry and joints neatly pointed with white cement added with pigment to match the colour of the tiles including curing, all as directed at site of work including all labour, materials, tools, equipments, etc. complete. |
| 49 | 36.Providing, fixing and laying in position rigid unplasticised PVC pipes for waste water (Finolex or Truebore or Varun or equivalent) capable of withstanding a pressure of 4Kgf/Sq.cm including necessary bends, clamps and specials, etc., and wherever required including cutting the brick masonry/concrete, refilling with cement mortar and making good the disturbed portions including jointing the pipes using necessary adhesives,making the joints water tight and connections to floor traps, gully traps, manhole etc., all as directed at site of work, including cement and all materials, labour, tools, scaffolding, equipments, etc., complete. (a) 110mm dia |
| 50 | (36b). 75mm dia |
| 51 | 37.Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 20mm dia pipes(Trubore/Finolex) or equivalent having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing, including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge for External work, including all labour, materials, tools, equipments, scaffolding etc., all required accessories like tees, bends, couplings, elbows, reducers, unions, etc., and, including punching the masonry/concrete wherever required. |
| 52 | 38.Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 20mm dia pipes(Trubore/Finolex) or equivalent having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge for Concealed work all required accessories like tees, bends, couplings, elbows, reducers, unions, etc., and T.W plugs/clamps, including punching the masonry/concrete wherever required including all labour, materials, tools, equipments, scaffolding etc., complete. |
| 53 | 39.Providing and fixinggood quality European Water Closet white/colour(Parryware or Hindware) with necessary \"P\" or \"S\" trap of approved make and qualityfixed in brick jelly cementconcretein volumetric proportion, curing and making good the disturbedportions, including providing 10 litres capacity Anti microbial solid non corrosive polystyrene low level flushing cistern (Slim line of Parryware or equivalent) with 40mm dia flush pipe, plastic seat and cover fixing TW plugs etc., in sound working condition as per relevant specification and as directed at site including all materials, labour, tools, equipment, etc., complete. |
| 54 | 40.Providing and fixing good quality vitreous size 550x400mm hand wash basin (White) as available in the market (Kings mere basin of Parryware or Hindware)with a single 15mm c.p. brass pillar tap, c.p. waste fitting, 32mm dia c.p. brass union, 15mm dia PVC inlet connection, 32mm dia PVC waste pipe fittings, a pair of cast iron bracketssuitable for fixing the wash hand basin as available in the market, including painting the brackets, etc. with two coats of synthetic enamel paint over one coat of primer, fixing the brackets with teakwood plug and making good the disturbed portion, etc., all as directed in sound working condition including cement and other materials, labour, tools, equipments etc. complete. |
| 55 | 41.Providing and fixing good quality white vitreous flat back lipped in front urinal basin (white) (Parry ware or Hind ware) 430x260x350mm size fixing to wooden plug with brass screws including all fittings of approved brand &pattern and unions, PVC waste fittings of 32mm dia in sound working condition all as directed at site of work including cement and all labour, materials, tools, equipments etc., complete. |
| 56 | 42.Providing and fixing both side pre polished granite slabs of size 900x600mm of 18mm thicknesswith half round edges on the front and top edges for partition between urinals including fixing to the walls with stainless steel clamps, screws, etc., including cement and all other materials, labour, tools, equipment, etc., complete. |
| 57 | 43.Providing and fixing 110mm dia PVC Nahani trap (floor trap with grattings suitable for PVC waste water pipe) embedding the trap making the joints water tight etc., allas directed including allmaterials, labour, tools, equipments etc., complete. |
| 58 | 44.Supplying and fixing CP brass Pillar cock (Jaquar brand or equivalent approved brands) fittings in bath rooms, toilets, etc,including fixing to water pipe lines, making water tight joint etc., including C.P. wall flanges, testing the valves and joints etc., all as specified and as directed including all materials, labour, tools, equipments, etc., complete. |
| 59 | 45.Supplying and fixing CP brass two way cock 15mm (Jaquar brand or equivalent approved brands) fittings in bath rooms, toilets, etc,including fixing to water pipe lines, making water tight joint etc., including C.P. wall flanges, testing the valves and joints etc., all as specified and as directed including all materials, labour, tools, equipments, etc., complete. |
| 60 | 46.Supplying and fixing CP brass health faucet (Jaquar brand or equivalent approved brands) fittings in bath rooms, toilets, etc,including fixing to water pipe lines, making water tight joint etc., including C.P. wall flanges, testing the valves and joints etc., all as specified and as directed including all materials, labour, tools, equipments, etc., complete. |
| 61 | 47.Supplying and fixing CP brass over head shower(Jaquar brand or equivalent approved brands) fittings in bath rooms, toilets, etc,including fixing to water pipe lines, making water tight joint etc., including C.P. wall flanges, testing the valves and joints etc., all as specified and as directed including all materials, labour, tools, equipments, etc., complete. |
| 62 | 48.Supplying and fixing CP brass over head shower arm (Jaquar brand or equivalent approved brands) fittings in bath rooms, toilets, etc,including fixing to water pipe lines, making water tight joint etc., including C.P. wall flanges, testing the valves and joints etc., all as specified and as directed including all materials, labour, tools, equipments, etc., complete. |
| 63 | 49.Supplying and fixing CP brass long body tap (Jaquar brand or equivalent approved brands) fittings in bath rooms, toilets, etc,including fixing to water pipe lines, making water tight joint etc., including C.P. wall flanges, testing the valves and joints etc., all as specified and as directed including all materials, labour, tools, equipments, etc., complete. |
| 64 | 50.Supplying and fixing CP brass Angle valve (Jaquar brand or equivalent approved brands) fittings in bath rooms, toilets, etc,including fixing to water pipe lines, making water tight joint etc., including C.P. wall flanges, testing the valves and joints etc., all as specified and as directed including all materials, labour, tools, equipments, etc., complete. |
| 65 | 51.Providing and fixing on wall face PVCbevelled edge mirror of good quality glass of size 610x450mm with plywood back of approved quality all as directed at site of work all labour, materials, tools, equipments etc., complete. |
| 66 | 52.Supplying and fixing Acrylic soap tray in bath rooms, toilets, etc., with necessary screws, etc., as directed at site of work including all materials, labour, tools, equipments, etc. complete. |
| 67 | 53.Supplying and fixing towel rail 600mm long in toilets with necessary screws, etc., as directed at site of work including all materials, labour, tools, equipments, etc. complete. |
| 68 | 54.Re-filling with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. wherever required in layers not exceeding 200mm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m all asper direction of Engineer-in-charge and including all labour,tools, equipments, etc., complete. |
| 69 | 55.Preparing the surfaces of ceiling and applying two coats of premium acrylic emulsion paint (asian orequivalent) to give an even shade all as directed at site of work wherever required including all labour, materials, tools, brushes, tackles, equipments, scaffolding etc., complete |
| 70 | 56.Preparing the surfaces of inner wallsurfaces and applying two coats ofacrylic emulsion paint (asian orequivalent) over one coat of acrylic distemper primer for old/new wall surfacesto give an even shade all as directed at site of work wherever required including all labour, materials, tools, brushes, tackles, equipments, scaffolding etc., complete |
| 71 | 57.Preparing the surfaces of outer wallsurfaces and applying two coats of premium acrylic emulsion paint (asian orequivalent) and UV resistance, Alkali & fungal resistance, dirt resistance exterior paint over one coat of exterior primer for old/new wall surfaces to give an even shade all as directed at site of work wherever required including all labour, materials, tools, brushes, tackles, equipments, scaffolding etc., complete |
| 72 | 58(a).Preparing the surfaces of old steel members of height more than 3m and painting with two coats of synthetic enamel paint (asian orequivalent) over one coat of primer of approved quality to give an even shade, all as directed at site of work including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete. Note:1.Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2.The above quantity is inclusive of painting co-efficient. |
| 73 | 58(b). Preparing the surfaces of old steel members of height less than 3m and painting with two coats of synthetic enamel paint (asian orequivalent) over one coat of primer of approved quality to give an even shade, all as directed at site of work including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete. Note:1.Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2.The above quantity is inclusive of painting co-efficient. |
| 74 | 59.Preparing the surfaces of new steelmembers and painting with two coats of synthetic enamel paint (asian orequivalent) over one coat of primer of approved quality to give an even shade, all as directed at site of work including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete. Note:1.Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2.The above quantity is inclusive of painting co-efficient. |
| 75 | 60.Preparing the new wooden surfaces of doors and varnishing two coats with superior quality varnish over a coat of flatting varnish to give a neat and elegant appearance all as directed at site of work including all materials, labour, tools, brushes, equipments, etc. complete.Note:1.Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2.The above quantity is inclusive of painting co-efficient. |
| 76 | 61.Loading, Transporting,dumping and levelling the surplus earth/debris from the site tothe low lying area in theport premiseswith in a lead of 3Kms as directed including levelling at dumping site, all materials, labour, tools, equipment, fuel,etc., complete.Note:1) The contractor shall maintain tripsheets in triplicate in approved format at his own cost for the quantity of debris/earth transported.2) No interim paymentwill be made. A deduction of20 % will be made on lorry cubicalcontent for earth transportation and No deduction of voids for debris will be made.3) How ever, the final quantityof Debriswill be restricted toactual quantity of demolishing item. a) Surplus earth. |
| 77 | 61(b). Debris |
| 78 | SCHEDULE A2- Electrical Works (Note:The following items will be executed by M& EE Department of ChPA) |
| 79 | 1.Supply of LDB with suitable way comprising of 1 No.63A, 4P, MCB as incomer and 8 Nos. 20A, DP, MCB, and 10 Nos. 10A, SP, MCB as outgoing circuits with suitable copper wires / busbars for each phase and neutral along with all other components. |
| 80 | 2.Installation of above LDB on the wall. |
| 81 | 3.Supply of 4 core 25 sq. mm L.T. underground cable of 1100V galvanized steel strip armoured XLPE cable with stranded Aluminium conductor conforming to IS. 7098 Part I with latest amendments. |
| 82 | 4.Laying of the 4 core 25 sq.mm, LTcable in clamping on the wall with G.I clamp of equal interval distance. |
| 83 | 5.Laying of 25 Sq. mm LT cable and measured running meters for by earth excavation to a depth of 0.6M and re closing the same after completion of work. |
| 84 | 6.Supply of all materials, accessories and to carry out the surface / concealed conduit pipe wiring by using suitable size of PVC with 2 runs 4 sq.mm and one run of 2.5 Sq.mm PVC insulated unsheathed multi strand copper conductor wires from LDB toSSB and AC MCB box. |
| 85 | 7.Supply of all materials, accessories and to carry out the surface / concealed conduit pipe wiring by using suitable size of PVC with 2 runs 2.5 sq.mm and one run of 1.0 Sq.mm PVC insulated unsheathed multi strand copper conductor wires from LDB to 20A, DP, MCB enclosures, 450W Exhaust Fan, 150 W LED Flood light and 900W / 12FT / 8FT – LED Sports Light fittings. |
| 86 | 8.Supply of all materials, accessories and to carry out the surface / concealed conduit pipe wiring by using suitable size of PVC/case and capping with 3 runs 1.5 Sq.mm PVC insulated unsheathed multi strand copper conductor wires for Ceiling fans, Wall mounting fans, LED Tube light fittings etc., through connected junction/ inspection boxes along with flush type control switch along with base plates and ceiling rose including terminations wherever necessary from flush type sub switch board to individual points. |
| 87 | 9.Supply of 900W / 12FT / 8FT – LED Sports Light as per lux level standards – 900W & 88 Rfts per court . Total length is 176 Rfts. |
| 88 | 10.Installation of above fittings with Lighting Frame in the two courts. |
| 89 | 11.Supply of 1x 150 W LED Flood light shall be made up of die cast aluminum housing with high power LEDs with IP 66, Integral type. |
| 90 | 12.Installation of above light fittings with all other accessories. |
| 91 | 13.Supply of suitable way FRP/ Thermoplastic / SMC junction box IP 66 with Bolt & Nut type of brass / SS connectors of each fittings and loop to next light fitting with all other accessories. |
| 92 | 14.Installation of suitable way FRP/ Thermoplastic / SMC junction box IP 66 with Bolt & Nut type of brass / SS connectors of each fittings and loop to next light fitting with all other accessories. |
| 93 | 15.Supply of surface type tube light fitting suitable for 220V, 4 feet, 2 x 20 WattsT8 LED batten type slim tube light fitting. With white colour. |
| 94 | 16.Installation of above 2 x 20 watts LED Fittings with LED Tube light. |
| 95 | 17.Supply of surface type tube light fitting suitable for 220V, 4 feet, 1 x 18/20 Watts T8 LED batten type slim tube light fitting. With white colour. |
| 96 | 18.Installation of above 1 x 18/20 watts LED Fittings with LED Tube light. |
| 97 | 19.Supply of brown colour 1200 mm sweep Ceiling fan with wide blades with electronic regulator and all other accessories at various locations. |
| 98 | 20.Installation of above 1200 mm sweep ceiling fan at various locations. |
| 99 | 21.Supply of 450mm sweep wall mounting fan with all other accessories. |
| 100 | 22.Installation of above 450mm sweep wall mounting fan with all other accessories. |
| 101 | 23.Supply of 18” (450 mm)exhaust fan with all other accessories. |
| 102 | 24.Installation of18” (450 mm) exhaust fan. |
| 103 | 25.Supply of one number 20A, DP, MCB with suitable metal type enclosure (C series MCB) as at various locations. |
| 104 | 26.Installation of above AC enclosure. |
| 105 | 27.Supply of all materials and accessories of 5Amps switch and socket outlet to be mounted in the flush type sub switch board itself including the supply of 5Amps modular switch and socket outlet with control switch and base plates and wiring to the plug. |
| 106 | 28.Installation of above 5 A switch and socket sub switch board itself. |
| 107 | 29.Supply of all materials of Maintenance free earthing. |
| 108 | 30.Installation of above maintenance free earthing. |
| 109 | 31.Testing and Commissioning of the entire work. |
| 110 | 32.Removal of existing electrical fittings and wiring, etc., |
