Tender For Various Repair And Maintenance Work Of Toilet In Uda Jurisdiction. 7806 - Item Code [1.36.9 BSR2022]:Item Type [building] :: P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall :Size 630 mm x 500 mm dia for counter top 2 Item Code [1.7.2 (2022)]:Item Type [building] :: P & F water closet seat covers with brass hinges complete . white. 3 Item Code [12.22.2 BSR2022]:Item Type [building] :: Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete. Old Plastered Surface (Two or more coat 4 Item Code [12.40.1]:Item Type [building] :: 12.40 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect 5 Item Code [2.30.1 BSR2022]:Item Type [building] :: Providing and fixing Polyethylene - Aluminium -Polyethylene (PE-AL-PE) Composite Pressure Pipes as per 15450 : 2004 U.V. stablised with carbon black having thermal stabillity for hot and cold water supply, capable to withstand temperature upto 80ºC including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers connectors etc.with clamps at 1.00 metre spacing.This include the cost of cuttingchases and including testing of joints complete as per direction of Engineer In charge Concealed installation including cutting chases and making good the walls etc. complete. 1216 (16mm OD) pipe 6 Item Code [2.33]:Item Type [building] ::Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge. Sub Item Code [2.33 + 2.33.10]: Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge. Sink cock with swinging casted spout (table mounted ) 15 mm nominal size 7 Item Code [2.33]:Item Type [building] ::Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge.Sub Item Code [2.33 + 2.33.11]: Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge. Single lever wash basin mixer with 450 mm long copper connection pipe 8 Item Code [2.33]:Item Type [building] ::Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge.Sub Item Code [2.33 + 2.33.12]: Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge. Central hole basin mixer 9 Item Code [2.33]:Item Type [building] ::Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge.Sub Item Code [2.33 + 2.33.13]: Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge. Wall mixer 3 in 1 system with provision of tetephonic bath shower with bend pipe 10 Item Code [2.33]:Item Type [building] ::Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge.Sub Item Code [2.33 + 2.33.14]: Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge. 600 mm long towel rail 11 Item Code [2.33]:Item Type [building] ::Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge.Sub Item Code [2.33 + 2.33.15]: Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge. Revolving type towel ring 12 Item Code [2.33]:Item Type [building] ::Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge.Sub Item Code [2.33 + 2.33.16]: Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge. Soap dish 13 Item Code [2.33]:Item Type [building] ::Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge.Sub Item Code [2.33 + 2.33.17]: Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge. Double coat hook 14 Item Code [2.33]:Item Type [building] ::Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge.Sub Item Code [2.33 + 2.33.2]: Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge. Swan neck pillar cock 15 mm nominal size 15 Item Code [2.33]:Item Type [building] ::Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge.Sub Item Code [2.33 + 2.33.3]: Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge. Bib Cock with long thread 15 mm nominal size 16 Item Code [2.33]:Item Type [building] ::Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge.Sub Item Code [2.33 + 2.33.4]: Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge. Long body Bib Cock 15 mm nominal size 17 Item Code [2.33]:Item Type [building] ::Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge.Sub Item Code [2.33 + 2.33.6]: Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge. Angular stop cock with long thread 15 mm nominal size 18 Item Code [2.33]:Item Type [building] ::Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge.Sub Item Code [2.33 + 2.33.7]: Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge. Stop cock long thread 19 Item Code [2022 1.36.5]:Item Type [building] :: P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall :1.36.5 Size 610 mm x 510 mm 20 Item Code [2022 1.44.2]:Item Type [building] :: P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers. 1.44.2 Other sizes 21 Item Code [2022 1.6]:Item Type [building] :: Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m , disposed earth to be levelled and neatly dressed : All kinds of soil 22 Item Code [2022 12.22.1 Putty]:Item Type [building] :: Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete. New Plastered Surface (three or more coats) 23 Item Code [2022 12.40.2 old work]:Item Type [building] :: Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Old Work (One or more coats) 24 Item Code [2022 12.46.1 Enamel paint]:Item Type [building] :: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 25 Item Code [2022 12.46.2]:Item Type [building] :: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :One or more coats on old work. 26 Item Code [2022 14.55 Dismantling Plaster]:Item Type [building] :: Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. 27 Item Code [2022 2.12.1]:Item Type [building] :: P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc.2.12.1 C.P. Inlet connection 15mm.Brass (IS : 8931 marked) 28 Item Code [2022 2.13.4 ]:Item Type [building] ::P & F 15 mm. Dia Connection Pipe of approved quality/make 2.13.4 (-do-) 600mm. 29 Item Code [2022 2.14.9]:Item Type [building] :: P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make : 2.14.9 Brass / Gun metal Half-turn wt. 1 Kg. of approved quality /make, 25mm nominal bore. 30 Item Code [2022 3.1.1 M20]:Item Type [building] :: Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). 31 Item Code [2022 3.1.4 M10]:Item Type [building] :: Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). 32 Item Code [2022 3.16.3]:Item Type [building] :: P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.110 mm dia 33 Item Code [2022 3.16.4]:Item Type [building] :: P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 160 mm dia 34 Item Code [2022 3.17.1]:Item Type [building] ::P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Coupler (socket)Sub Item Code [2022 3.17.1 + 3.17.1.1]: P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Coupler (socket) 75mm dia 35 Item Code [2022 3.17.1]:Item Type [building] ::P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Coupler (socket)Sub Item Code [2022 3.17.1 + 3.17.1.2]: P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Coupler (socket) 110mm dia 36 Item Code [2022 5.2.2]:Item Type [building] :: Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1 : 6 (1 cement : 6 coarse sand) 37 Item Code [2022 6.1.6 SM 1:6]:Item Type [building] :: Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). 38 Item Code [2022 7.5.1]:Item Type [building] :: Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) withpigment to match the shade of the marble slab including grinding, rubbing and polishing complete. 7.5.1 Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour) (iii) Above 3601 Cm2Slabs 39 Item Code [2022 7.6.2.1]:Item Type [building] ::Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite/Kota Stone Work (i) Full Edge moulding 40 Item Code [2022 9.8 gate & grating]:Item Type [building] :: Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 41 Item Code [2022 S 1.2]:Item Type [building] ::P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Sub Item Code [2022 S 1.2 + 1.2.2]: P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm. 42 Item Code [2022BSR 2.30.3 25MM]:Item Type [building] :: Providing and fixing Polyethylene - Aluminium -Polyethylene (PE-AL-PE) Composite Pressure Pipes as per 15450 : 2004 U.V. stablised with carbon black having thermal stabillity for hot and cold water supply, capable to withstand temperature upto 80ºC including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers connectors etc.with clamps at 1.00 metre spacing.This include the cost of cutting chases and including testing of joints complete as per direction of Engineer In charge Concealed installation including cutting chases and making good the walls etc. complete. 25 MM OD PIPE 43 Item Code [2022BSR 2.30.4 32MM]:Item Type [building] :: Providing and fixing Polyethylene - Aluminium -Polyethylene (PE-AL-PE) Composite Pressure Pipes as per 15450 : 2004 U.V. stablised with carbon black having thermal stabillity for hot and cold water supply, capable to withstand temperature upto 80ºC including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers connectors etc.with clamps at 1.00 metre spacing.This include the cost of cutting chases and including testing of joints complete as per direction of Engineer In charge Concealed installation including cutting chases and making good the walls etc. complete. 32 MM OD PIPE 44 Item Code [5.7.2 BSR2022]:Item Type [building] :: Half brick masonry in foundation & plinth using bricks of designation 75. Cement mortar 1 : 4 (1 cement : 4 coarse sand). 45 Item Code [BBSR2022 16.4.2]:Item Type [building] :: Providing and fixing 12 mm thick prelaminated three layer medium density exterior gradeparticle board Grade I, Type II conforming to IS 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brassstainless steel screws etc. complete as per architectural drawings and direction of engineer in charge.Prelaminated particle board with decorative lamination onboth sides. 46 Item Code [BSR 2022 2.15]:Item Type [building] ::P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :Sub Item Code [BSR 2022 2.15 + 2.15.3]: P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : (-do-) 25mm nominal bore. 47 Item Code [BSR 2022 7.20]:Item Type [building] :: Sub Item Code [BSR 2022 7.20 + 7.20.1]: Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades ceramic glazed vitrified tiles with water absortion less than orequal to 0.08% confirming to IS:13753 & IS : 15622 on walls, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). Size 600mm x 1200mm 48 Item Code [BSR 2022-12.3.1]:Item Type [building] ::Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : Sub Item Code [BSR 2022-12.3.1 + 12.3.1]: Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 25 mm thick 49 Item Code [BSR2022 1.20.3]:Item Type [building] :: P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball (IS: 1703 mark) complete including cutting and making good the wall:PVC with PVC bend and superior internal fittings as per IS :7231 . 50 Item Code [BSR2022 1.30.1]:Item Type [building] :: P & F C.P. brass Doom Waste Coupling 32 mm dia. 51 Item Code [BSR2022 1.38.9.5]:Item Type [building] :: 1.0 mm thick stainless steel AISI -304 & IS 13983-1994kitchen sink of approved make as per Engineer-in-charge withlarge waste coupling.45 x 20 x 8& 20x16x8 (with drain board). 52 Item Code [BSR2022 1.4]:Item Type [building] :: P & F European type white glazed vitreous china 1st quality Double syphonic W.C (IS :2556 Mark) with P or S trap including cutting and making good the wall and floor. 53 Item Code [BSR2022 1.40]:Item Type [building] :: P & F 1st quality WVC pedestal for wash basin. 54 Item Code [BSR2022 1.43.3]:Item Type [building] :: P& F waste Pipe with all fitting .P.V.C. with C.P. nut 40 mm dia 55 Item Code [BSR2022 1.59]:Item Type [building] :: 1.59 P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. 56 Item Code [BSR2022 1.67]:Item Type [building] :: Removing & Re fixing of P.V.C. Cistern fittings (Syphon, Ball cock & Handle Set) complete as per direction of Enginner-in- Charge 57 Item Code [BSR2022 1.75]:Item Type [building] :: Supply of Hydraulic Seat Cover for Europeon WC of superior quality approved make in white Colour 58 Item Code [BSR2022 1.78]:Item Type [building] :: Providing and fixing new spindle for Bib cock/pillar cock for repairing purpose to solve leakage and proper functioning of tap. 59 Item Code [BSR2022 10.27]:Item Type [building] :: Providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS 2095- Part I at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thickwith flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long 60 Item Code [BSR2022 10.39]:Item Type [building] :: Providing and fixing of perforated Metal Tile Ceiling System comprising of Tile of 600mm wide and 600mm long manufactured out of 0.7mm thick aluminium alloy 3105 with beveled edge of 4.15mm width height of 32mm. The tiles shall be perforated to 1.5mm dia with open area of 23%. The Tile will be manufactured on advanced includes several leveling stages in the manufacturing process by approved manufacturers. Tile ends will be raised with pips and slops to ensure positive engagement into the spring to enable for de-mounting of individual panels. The Tile sides will be sufficiently high to ensure a minimum defl 61 Item Code [BSR2022 11.26]:Item Type [building] :: Random rubble dry stone Kharanja under floor. 62 Item Code [BSR2022 13.1]:Item Type [building] :: Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand). 63 Item Code [BSR2022 14.23.1]:Item Type [building] :: Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead:For thickness of tiles 10mm to 25mm. 64 Item Code [BSR2022 16.1.1.1 ]:Item Type [building] :: Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubularappropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,miteredand jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing paneling , C.P. brass stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in charge .Glazing and paneling to be paid for separately.For fixed portionAnodised aluminum anodised transparent 81 dyed to requiredshade according to IS1868. Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer 65 Item Code [BSR2022 16.1.2.1]:Item Type [building] :: Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,miteredand jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately).For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately).Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approvedAnodizer) 66 Item Code [BSR2022 16.10]:Item Type [building] :: Sub Item Code [BSR2022 16.10 + 16.10.1]: Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium section (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge.Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) 67 Item Code [BSR2022 16.11]:Item Type [building] :: S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws not exceeding 150mm distance at all heights with all lead and lift with scafolding. 68 Item Code [BSR2022 16.5.2]:Item Type [building] :: Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm). 69 Item Code [BSR2022 2.30.2]:Item Type [building] :: Providing and fixing Polyethylene - Aluminium -Polyethylene (PE-AL-PE) Composite Pressure Pipes as per 15450 : 2004 U.V. stablised with carbon black having thermal stabillity for hot and cold water supply, capable to withstand temperature upto 80ºC including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers connectors etc.with clamps at 1.00 metre spacing.This include the cost of cuttingchases and including testing of joints complete as per directionof Engineer In charge Concealed installation including cutting chases and making good the walls etc. complete.1620 (20mm OD) pipe. 70 Item Code [BSR2022 2.33.19]:Item Type [building] :: Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge.Shower arm. 71 Item Code [BSR2022 2.33.21]:Item Type [building] :: Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge. Hand shower with 8 mm dia 1 mt long PVC tube & wall hook complete 72 Item Code [BSR2022 2.41]:Item Type [building] :: Labour Charges for Removing & Refixing the water Storage Tank of all sizes and including all Necessary fitting complete in all respect as per approved sample and direction of engineer in charge. 73 Item Code [BSR2022 3.17]:Item Type [building] ::P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:Sub Item Code [BSR2022 3.17 + 3.17.3(1)]: P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Plain tee 75mm 74 Item Code [BSR2022 3.17]:Item Type [building] ::P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:Sub Item Code [BSR2022 3.17 + 3.17.3(2)]: P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Plain tee 110mm 75 Item Code [BSR2022 3.45]:Item Type [building] ::Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. Sub Item Code [BSR2022 3.45 + 3.45.1A]: Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. Coupler 75mm dia 76 Item Code [BSR2022 3.45]:Item Type [building] ::Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. Sub Item Code [BSR2022 3.45 + 3.45.1B]: Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. Coupler 110mm dia 77 Item Code [BSR2022 3.45]:Item Type [building] ::Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. Sub Item Code [BSR2022 3.45 + 3.45.25]: Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. Nahni Trap with Jali 4” 110mm dia 78 Item Code [BSR2022 3.45]:Item Type [building] ::Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. Sub Item Code [BSR2022 3.45 + 3.45.4A]: Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. Bend 87.5dg 75mm 79 Item Code [BSR2022 3.45]:Item Type [building] ::Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. Sub Item Code [BSR2022 3.45 + 3.45.4B]: Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make. Bend 87.5dg 110mm 80 Item Code [BSR2022 7.24.1]:Item Type [building] :: P & F 1st quality Heavy Duty Vitrified glazed MAT tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.size 600 mm X 600 mm 81 Item Code [building 2022 2.33.1]:Item Type [building] :: Providing and fixing superior quality ( jaquar continental) CP brass fittings complete as per direction of engineer in charge Pillar Cock 15 mm nominal bore 82 Item Code [building 2022 S 1.14.2]:Item Type [building] :: P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete.Flat Back (large) or half stall size 610x400x80mm. 83 Item Code [building 2022 S 2.13.1]:Item Type [building] :: P & F 15 mm. Dia Connection Pipe of approved quality/make : PVC pipe with C.P. Brass nuts upto length, 300mm 84 Item Code [buildingt 2022 S.3.16.2]:Item Type [building] :: P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 75 mm dia 85 Item Code [S 2022 2.26]:Item Type [building] ::P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:Sub Item Code [S 2022 2.26 + 2.26.5]: P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:1000 litres capacity
