Tender For Furniture Work At New Nagar Parishad Building M.C. Bundi - Providing & Fixing in position, following Acoustical Panelling on 50 x 50 mm sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 gsm synthetic wool 50 mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour, finishing etc complete Fabric wrapped Compressed polyester fibre nonwoven 9 mm panels 2 Providing & Fixing in position, Carpet more than 800+ gsm, made with100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions &Complete in all aspects including all materials labour, finishing etc complete 3 Providing and fixing wall panelling on existing wood frame as per specification and drawing using : 6 mm teak ply one side BWR ISI marked 4 Supplying and fixing wood work in frames of wall panelling, false ceiling partition wall etc. as per approved design and drawing including antitermite treatment. Sal wood 5 Providing & Fixing in position Acoustical Doors along with 150 x 150 mm teak wood frame, doors made from 50mm Teak wood frame 600 x600 c to c filled with 1000 Gsm synthetic wool 50mm thick and 3mm Tecsound from both sides, 12mm waterproof ply & veneer from both sides , including 150mm heavy duty SS hinges (Geze / Dorma or eq.) 4 no each leaf, with Door-closer (Dorma/Geze or eq.) including cost of required Cut-Outs, decorative mouldings/finishing-items / melamine polish & Scaffolding as per Architectural & Acoustical Design & Instructions & Complete in all aspects. including all materials labour, finishing etc complete 6 Providing,making and fixing dias table furniture(Racks & leg supports of dias table) by jointing,made of 25mm thick Block board of approved ISI make and laminated with 1mm thick laminated sheet on both sides matching with wall panelling shade and design by means of adhesive, nails, screws rawl plugs etc ,edges of all these members are restored by fixing of plain/moulded teak wood 27x10 mm beading with the help of nails,adhesive etc complete with melamine polish for all sizes as per enclosed drawing and the direction of Engineer -in- charge (Area of block board will be measured horizontal & vertical for payment) 7 Providing ,making and fixing dias table furniture(Top of dias table)on rack support ,made of 35mm thick Block board of approved ISi make and laminated with I mm thick laminated sheet on both sides matching with wall panel! ing shade and design by means of adhesive, nails, screws raw! plugs etc ,all the edges of table lop arc restored by fixing of moulded teak wood 37x25 111111 beading with the help of nails,adhesivc etc complete with melamine polish for all sizes as per enclosed drawing and the direction of Engineer -in- charge(Top plan area of block hoard will be measured fo1r ment) 8 Providing, making & fixing table almirah shutters made of 25mm thick Block board of approved ISI make and laminated with Imm thick laminated sheet on both sides matching with wall panelling shade and design by means of adhesive, nails, screws rawl plugs ete edges of all these members are restored by fixing of plain/moulded teak wood 27x10 mm beading with the help of nails, adhesive ete complete with melamine polish for and required stainless steel fittings such as hinges,handles.tower bolts, magnets, chains & lock (Godrej make) ete for all sizes as per drawing and the direction of Engineer-in-charge (Area of block board will be measured horizontal & vertical for payment) 9 Supplying and placing of 3-seater sofa with arm fully cover superior quality PU leatherites/fabric cusion with four legs.Inner size of sofa Seat 5 6 X 21 X and back 5 6X20 Inner structure made by chir wood frame 1 x 1.5 spring fitted on frame with 1.25 mm small steel stopper, nails, four ss legs (202grade) and foaming pasted by adhesive and F-nails compressed by auto nail machine. 40 Density 4 th. foam seat,32 density 2th. foam back and 32 density 1th. foam arms and zik-zek spring 1.5mm th., 12mm th.commercial ply.including cost of material and labour completed with all repect as per enclosed drawing and as per direction of Engineer incharge. 10 Supplying and placing of 1-seater sofa with arm fully cover superior quality PU leatherites/fabric cusion with four legs..Inner size of sofa Seat 21 *21 and back 21 *20 . Inner structure made by chir wood frame 1x1.5, spring fitted on frame with 1.25 mm small steel stopper, nails, four ss legs(202 grade) and foaming pasted by adhesive and F-nails compressed by auto nail machine. 40 Density 4 th. foam seat, 32 density 2th. foam back and 32 density 1th. foam arms and zik-zek spring 1.5mm th., 12mm th.commercial ply.including cost of material and labour completed with all repect as per enclosed drawing and as per direction of Engineer incharge. 11 Supplying and placing of ghana teak wood grade-1 wooden centre table (teak wood) 3 * 2 * 1 6 With 10mm th. Glass top and Melamine polish. Wooden structure are 2 *2 square legs, 3X1.5 Top, 2X1.5 bottm cross wooden bars and 1.5 th. wooden strips at bottom plateform with maximum 50% opening, including cost of material and labour completed with all repect as per enclosed drawing and as per direction of Engineer incharge. 12 Supplying and placing of modular office table wooden/pu 6X4and 26 hieght.Size make in 42mm th.prelaminated board base top and side support and other part of table 17mm th. Prelaminated board base comleted. Covered by 2mm th. PVC as bend pasted by glue /adhesive hot melt and trimming by auto as bend machine. Both side of table 15X42X28 side unit with storage and computer facility, locks,handles ete including cost of material and labour completed with all repect as per enclosed drawing and as per direction of Engineer incharge. 13 Supplying and placing of best in class executive high back revolving office chair with neck support and superior comfort design with 40 density Pu foam with chrome finish structure, handles upside covered for pu arms rest,tilting mechanisum air gas pump for backward and foreward movement, locking for writing position, Class three base make in iron moulded 5 Nos legs(1.5 mm th. heavy).including cost of material and labour completed with all repect as per enclosed drawing and as per direction of Engineer incharge. 14 Supplying and placing of Computer table Size 4X2 and height 26make 17 mm th. prelaminated board base Top and one side drawer, storage and key board, CPU,PUS Stand facility atteched including cost of material and labour completed with all repect as per enclosed drawing and as per direction of Engineer incharge. 15 Supplying and placing of wooden table(ghana teak wood grade-1) 6X3 and height 26 make 35mm th. plb wooden base top and Melamine polish. Wooden structure are 3X3 square legs.3X1.5 Top and bottm cross wooden bars, including cost of material and labour completed with all repect as per enclosed drawing and as per direction of Engineer incharge. 16 Supplying and placing of working table size 4X2 and height 26 in iron Each frame 1X1 Square pipe 16 gauge, side box 3nos of drawer with lock and 17mm th. Plb Top and PVC beading, spray paint on frame with handles and locks. including cost of material and labour completed with all repect as per enclosed drawing and as per direction of Engineer incharge. 17 Supplying and placing of best in class medium back staff chair with spine Each support and superior comfort design,capsule pipe frame support in bottom for flexibality and comfart in seating.used 32 density 2 th. PU leatherites/fabric cusion back 16X16and seat 16X16 with pvc arms.including cost of material and labour completed with all repect as per enclosed drawing and as per direction of Engineer incharge. 18 Supply of Wooden Conference Chair (Ghana Teak wood grade-1)size 1 6 *16 seat and 1 6 *26 back.2 2 *2 legs and rest of structure 1.5 back wooden seat cushion foam with fabric and back wooden strip.with melamine polish. including cost of material and labour completed with all repect as per enclosed drawing and the direction of Engineer -in- charge. 19 Supplying & Placing three seater airport sofa. The seat and back shall be made up of high quality cold rolled MS perforated sheet of 1.2mm thick, pressed and welded to form the shape. The seat and back electrostatically coated with epoxy powder and then cured under heat to allow it to form a skin. The armrest shall be made up of mild steel powder coated tube with 1.2mm thick. The base structure shall be supported by MS powder coated with 40-60µ (DFT). There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 440 plus/minus 10 mm(D) X 405±10 mm(H) from ground. Overall height shall be = 775 plus/minus 10 mm, overall depth = 710 plus/minus 10 mm & overall width = 1675 plus/minus 10 mm.Including cost of material and labour completed with all repect as per enclosed drawing and the direction of Engineer incharge. 20 Supplying & Placing four seater airport sofa. The seat and back shall be made up of high quality cold rolled MS perforated sheet of 1.2mm thick, pressed and welded to form the shape. The seat and back electrostatically coated with epoxy powder and then cured under heat to allow it to form a skin. The armrest shall be made up of mild steel powder coated tube with 1.2mm thick. The base structure shall be supported by MS powder coated with 40-60μ (DFT). There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 440 plus/minus 10 mm(D) X 405 plus/minus 10 mm(H) from ground. Overall height shall be = 775 plus/minus 10 mm, overall depth = 710 plus/minus 10 mm & overall width = 2325 plus/minus 10 mm.Including cost of material and labour completed with all repect as per enclosed drawing and the direction of Engineer incharge. 21 Supplying & placing cabinet with an overall size 750mm X 450mm X Each 600mm. The cabinet shall be made up of Pre- laminated particle board with approved laminate and finish as per approved shade. The top shall be made up of 25mm thick and other parts like side, back, shutter, facia, skirting shall be 18mm thick. The edges shall be sealed with thin strip of impermeable PVC. The storage shall be supplied with 2 nos. of shelves. Door shutters shall be provided for opening and closing the cabinet, Including cost of material and labour completed with all repect as per direction of Engineer incharge. 22 Supplying and placing of Judge chair made in Ghana Teak wood grade-1.Seating H 20 x D 21 x 24 and Bracekts H 50 x W 21 with full arms and Handle 3 and Legs 3 with wooden structure. The seat should be made of 18mm MR Grade plywood and back should be made of 12 mm plywood and frame, legs, handle should be of complete sagwan wood with Melamine Polish. The seat Cushion of the chair should be made up of 50mm thick High Density of 40+2 kg. Cub.M and back cushion should be made up of 38mm thick High Density 32+2 kg./cub.M and good quality approved valvet fabric.Including cost of material and labour completed with all repect as per direction of Engineer incharge.
