Supply, Installation & fittings of Internal Electrification items along with related accessories for installation of 4 TPH rice processing unit at Sonitpur under APART Project-- 1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FRLS (Fire Retardant Low smoke) PVC insulated copper conductor single core cable in surface PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C 2 Wiring for circuit/ submain wiring alongwith earth wire with the following size of FRLS PVC insulated copper conductor single core cable in surface PVC conduit as requried.2 X 1.5 sq. mm + 1 X 1.5 sq.mm earth wire 3 Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface PVC conduit as required.2x2.5 sq.mm. + 1x2.5 sq.mm. earth wire 4 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as requried. 5 Supply and drawing following sizes of FRLSH (Flame Retardant Low smok & Halogen) PVC insulated copper conductor, single core cable in the existing surface GI conduit as required.a) 3 x 1.5 sq.mm. 6 Supply and drawing following sizes of FRLSH PVC insulated copper conductor, single core cable in the existing surface GI conduit as required.a) 3 x 2.5 sq.mm. 7 Supply and drawing following sizes of FRLSH PVC insulated copper conductor, single core cable in the existing surface/recessed steel conduit as required.a) 3 x 4 sq.mm. 8 Supplying and fixing of following sizes of PVC conduit along with accessoriesin surface as required.20 mm. 9 Supplying and fixing of following sizes of GI conduit along with accessoriesin surface as required. (Conduit shall be reputed and shoud be relevant IS standard and ISI marked)20 MM dia with 1.40mm wall Thickness. 10 Supplying and fixing of following sizes of GI conduit along with accessoriesin surface as required. (Conduit shall be reputed and shoud be relevant IS standard and ISI marked)25 MM dia with 1.40mm wall Thickness. 11 Supplying and fixing suitable size 3/6 module GI box with modular plate and cover infront on surface including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switchconnection,etc. required. (Box shall be reputed and should be relevant IS standard and ISI marked) 12 Supplying and fixing suitable size 3/6 module GI box with modular plate and cover infront on surface or in recessincluding providing and fixing 6 pin 5/6 amps & 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switchconnection,etc. required. (Box shall be reputed and should be relevant IS standard and ISI marked) 13 Supplying and fixing 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double Pole 14 Supplying and fixing 16 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single Pole 15 Supplying and fixing following rating, TP, 415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 Amps 16 Supplying and fixing following rating, TPN, 415 volts, C Curve MCBin the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 17 Supplying and fixing following rating, Four pole, (3 phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing, MCB DB complete with connections, testing and commissioning etc. as required.40Amp(30mA) 18 Supplying and fixing following rating, Four pole, (3 phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing, MCB DB complete with connections, testing and commissioning etc. as required.63 Amp. 19 Supplying and fixing of following ways surface/recess mounting, Horrizontal type, 415 volts, Double door, TPN distribution board of sheet steel, dust protected, duly powder painted, inclusive of 100 amps tinned copper bus bar, common neutral link, earth bar, duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocksdin bar for mounting MCBs (but without MCBs and incomer) as required. 12 way (8 + 36), double door. 20 Fabrication, Supply Installation Testing and Commissioning of MCC Panel- Machine&Milling Section with all Electricals Reputed materials the panel shall have fabrication with 2mm and 1.5 mm CRCA (Cold Rolled close Annealed) sheet and shall be powder coated and shall haven neo print rubber gasket on the doors. The panel shall be fitted with Copper Bus bar of necessary size fitted with push button operated direct online starter/star delta starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorrosion treated sheet steel or iron clad enclosure and fixing the same to suitable capacity wires for 230/440 V 1/3 phase motor upto 50 HP.(Working Load 300 KW) with equipment name plate on each switching door.MANUAL OPERATION WITH PROCESSINTER LOCKING &MONITORING. (The size and quantity of outgoing feeder shall be as per the given load details and at least 1 spare of each type, and 4 additional feeder for lighting and power DBs.) 21 Fabrication, Supply Installation Testing and Commissioning of MCC Panel- Pre cleaning Section with all Electricals Reputed materials the panel shall have fabrication with 2mm and 1.5 mm CRCA sheet and shall be powder coated and shall haven neo print rubber gasket on the doors. The panel shall be fitted with Copper Bus bar of necessary size, fitted with push button operated direct online starter/star delta starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorrosion treated sheet steel or iron clad enclosure and fixing the same to suitable capacity wires for 230/440 V 1/3 phase motor upto 30 HP. (Working Load up to 45KW) with equipment name plate on each switching door.MANUAL OPERATION WITH PROCESSINTER LOCKING &MONITORING. (The size and quantity of outgoing feeder shall be as per the given load details and at least 1 spare of each type, and 4 additional feeders for lighting and power DBs.) 22 Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps C curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 23 Supplying and fixing of 20 amps, 240/415 volts, motor start stop push button switch with suitable type pvc/sheet steel enclosure, on surface complete with connections, testing and commissioning etc. as required. 24 Supply, installation, testing and commissioning of high bay light , suitable for ceiling mount hanging and continuous application, with Constant current output Switches able electronic driver, having a system level lumen of 2600 lumens and maximum wattage 55W, minimum efficacy 115lm/W, ....etc complete as required 25 Supply, installation, testing and commissioning of LED flood light outdoor type with IP65 rating , suitable for ceiling or wall mount and continuous application, with Constant current output Switches able electronic driver, having a system level lumen of 4000 lumens and maximum wattage 120W, ....etc complete as required 26 SITC of LED Batten light, suitable for wall/surface mounting, with Constant current output Switchesable electronic driver, having a system level lumen of 4000 lumens and maximum wattage 40W, minimum efficacy 100lm/W, colour temperature 4000K, ...etc complete as required 27 SITC of 240V, 50 Hz, 380 rpm Ceiling Fan having minimum 225 CMM air delivery of approved makes as per relevant standard and tender specifications including all accessories like down rod, blades, canopy, etc complete in all respects as per IS: 374-1979 & approved drawings, specs. of this tender & directions of Engineer-in-Charge. 1200 mm 28 SITC of following size Al/Cu.armoured cable in existing DWC pipe /on cable tray/surface/cable trench as required .3.5cx 300 sqmm AL armoured XLPE cable of 1.1 kv grade. 29 SITC-Supply laying testing & commissioning of following size Aluminium armoured cable in DWC/HDPE pipe/ cable trench as required.3.5cx70 sqmm AL armoured XLPE cable of 1.1 kv grade 30 SITC of following size Copper armoured cable on cable tray/surface/cable trench as required.3.5cx 50 sqmm Copper XLPE/PVC Insulated armoured FRLS cable of 1.1 kv grade. 31 SITC of following size Copper armoured cable on cable tray/surface/cable trench as required.3.5cx 35 sqmm Copper XLPE/PVC Insulated armoured FRLS cable of 1.1 kv grade. 32 SITC of following size Copper armoured cable on cable tray/surface/cable trench as required.3.5cx 25 sqmm Copper XLPE/PVC Insulated armoured FRLS cable of 1.1 kv grade. 33 SITC of following size Copper armoured cable on cable tray/surface/cable trench as required.4cx 16 sqmm Copper XLPE/PVC Insulated armoured FRLS cable of 1.1 kv grade. 34 SITC of following size Copper armoured cable on cable tray/surface/cable trench as required.4cx 10 sqmm Copper XLPE/PVC Insulated armoured FRLS cable of 1.1 kv grade. 35 SITC of following size Copper armoured cable on cable tray/surface/cable trench as required.4cx6 sqmm Copper XLPE/PVC Insulated armoured FRLS cable of 1.1 kv grade. 36 SITC of following size Copper armoured cable on cable tray/surface/cable trench as required.4cx4 sqmm Copper XLPE/PVC Insulated armoured FRLS cable of .750 kv grade. 37 SITC of following size Copper armoured cable on cable tray/surface/cable trench as required.4cX2.5 sqmm Copper XLPE/PVC Insulated armoured FRLS cable of .750 kv grade. 38 Supply and End Termination with brass double compression gland and suitable size of aluminium lugs for 3.5CX300 sqmm XLPE/PVC insulated armoured AL cable 1.1 kv grade as required. 39 Supply and End Termination with brass double compression gland and suitable size of aluminium lugs for 3.5CX70 sqmm XLPE/PVC insulated armoured AL cable 1.1 kv grade as required. 40 SSupply and End Termination with brass double compression gland and suitable size of copper lugs for 3.5CX50 sqmm XLPE/PVC insulated armoured copper cable 1.1 kv grade as required 41 Supply and End Termination with brass double compression gland and suitable size of copper lugs for 3.5CX35 sqmm XLPE/PVC insulated armoured copper cable 1.1 kv grade as required. 42 Supply and End Termination with brass double compression gland and suitable size of copper lugs for 3.5CX25 sqmm XLPE/PVC insulated armoured copper cable 1.1 kv grade as required.. 43 Supply and End Termination with brass double compression gland and suitable size of copper lugs for 3.5CX16 sqmm XLPE/PVC insulated armoured copper cable 1.1 kv grade as required. 44 Supply and End Termination with brass double compression gland and suitable size of copper lugs for 3.5CX10 sqmm XLPE/PVC insulated armoured copper cable 1.1 kv grade as required 45 Supply and End Termination with brass double compression gland and suitable size of copper lugs for 4CX6 sqmm XLPE/PVC insulated armoured copper cable 1.1 kv grade as required.. 46 Supply and End Termination with brass double compression gland and suitable size of copper lugs for 4CX4 sqmm XLPE/PVC insulated armoured copper cable 1.1 kv grade as required 47 Supply and End Termination with brass double compression gland and suitable size of copper lugs for 4CX2.5 sqmm XLPE/PVC insulated armoured copper cable 1.1 kv grade as required 48 Supplying and installing 300mm width X50 mm depth X 1.6 mm thickness size of perforated HOT DIP galvanised G.I cable tray (Galvanisation thickness not less than 50 micron) with perforation not more than 17.5% in convenient section, joint with connector suspended from the ceiling with G.I/M.S suspenders including nuts & bolts painting suspenders etc as required. . (Tray materials should be ISI marked and relevant IS standard) 49 Supplying and installing 150mm width X50 mm depth X 1.6 mm thickness size of perforated HOT DIP galvanised G.I cable tray (Galvanisation thickness not less than 50 micron) with perforation not more than 17.5% in convenient section, joint with connector suspended from the ceiling with G.I/M.S suspenders including nuts & bolts painting suspenders etc as required. 50 Supplying and installing 100mm width X50 mm depth X 1.6 mm thickness size of perforated HOT DIP galvanised G.I cable tray (Galvanisation thickness not less than 50 micron) with perforation not more than 17.5% in convenient section, joint with connector suspended from the ceiling with G.I/M.S suspenders including nuts & bolts painting suspenders etc as required. 51 Supplying and installing 300mm width X50 mm depth X 1.6 mm thickness size of perforated HOT DIP galvanised G.I cable tray TEE with perforation not more than 17.5% in convenient section, joint with connector suspended from the ceiling with G.I/M.S suspenders including nuts & bolts painting suspenders etc as required. 52 Supplying and installing 300mm width X50 mm depth X 1.6 mm thickness size of perforated HOT DIP galvanised G.I cable tray Bend with perforation not more than 17.5% in convenient section, joint with connector suspended from the ceiling with G.I/M.S suspenders including nuts & bolts painting suspenders etc as required. 53 Supplying and installing 150mm width X50 mm depth X 1.6 mm thickness size of perforated HOT DIP galvanised G.I cable tray TEE with perforation not more than 17.5% in convenient section, joint with connector suspended from the ceiling with G.I/M.S suspenders including nuts & bolts painting suspenders etc as required. 54 Supplying and installing 150mm width X50 mm depth X 1.6 mm thickness size of perforated HOT DIP galvanised G.I cable tray BEND with perforation not more than 17.5% in convenient section, joint with connector suspended from the ceiling with G.I/M.S suspenders including nuts & bolts painting suspenders etc as required. 55 Supplying and installing 100mm width X50 mm depth X 1.6 mm thickness size of perforated HOT DIP galvanised G.I cable tray TEE with perforation not more than 17.5% in convenient section, joint with connector suspended from the ceiling with G.I/M.S suspenders including nuts & bolts painting suspenders etc as required. 56 Supplying and installing 100mm width X50 mm depth X 1.6 mm thickness size of perforated HOT DIP galvanised G.I cable tray BEND with perforation not more than 17.5% in convenient section, joint with connector suspended from the ceiling with G.I/M.S suspenders including nuts & bolts painting suspenders etc as required. 57 Supplying and installation of different size of Reducer perforated HOT DIP galvanisedwith perforation not more than 17.5% in convenient section, joint with connector suspended from the ceiling with G.I/M.S suspenders including nuts & bolts painting suspenders etc as required. 58 Supplying and Laying of 6 SWG G.I Wire at 0.5 mtr below ground for conductor earth electrode for equipment earthing including connection/termination with G.I thimbel/lug. 59 Supplying and Laying of 25mm X 5mm G.I Strip at 0.5 mtr below ground for conductor earth electrode for equipment earthing including connection/termination with G.I thimbel/lug, nut & bolt washer etc. (Jointing shall be done by overlaping) 60 Supplying and Laying of 25mm X 5mm G.I Strip with 40 mm dia G.I Pipe of 3 metermtr below ground for conductor earth electrode for equipment earthing including connection/termination with G.I thimbel/lug, nut & bolt washer etc. (Jointing shall be done by overlaping) including excavation, pit digging and filling with proper earthing chemical. 61 Supplying and Installation of 20 mm Copper Air terminal rod of 3 mtr length for lightning arraester and connection/termination with 8 mm round conductor. 62 Supplying and Laying of 8 mm Al round conductor on ROOFfor conductor earth electrode for lightening arraester earthing including connection/termination with G.I thimbel/lug and PVC insullated conductor holder to avoid connection with metal truss.
