Tender For Purchase Of Furniture, bhopal-Madhya Pradesh

Tender For Purchase Of Furniture; 1 Compactor -The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS : 513 . Each body shall have a main unit plus add on units. Finish shall be Epoxy polyester powder coated thickness of 40 microns. Shelf construction shall be made from CRCA steel 0.8 mm thick IS:513 .Uniformly distributed load capacity of 80 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3.15 mm thick conforming to IS : 10748 . Finish shall be epoxy polyester powder coat of approved color & shade with a dry film thickness of minimum 40 microns .The Movements shall be Drive Type configuration. Fittings shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it gets locked on channels when all the units are brought together. The Recess handle lock is of Godrej make & placed at suitable height. This arrangement occupies a space of 90.0 mm. Each Drive Type units shall have Locking Knob near the drive wheel for manual locking of individual units when a person is using those units. Knob shall be rotated to unlock position when units are to be moved. End stoppers shall be provided to prevent derailment. Door locking shall be having hinged doors of recessed die cast handle cum lock giving 3 way locking through a lever & shooting bolts . Guide channels shall have J section 2 mm thick HR & 25 mm Square bright bar. Fasteners shall be galvanized/ blackodised /Zn plated .The label holder shall be made from 2 mm thick clear transparent acrylic sheet. Fascia(tiling) 3 tile pattern fascia option on drive side panel plus 3 tile pattern fascia on non-drive side panel plus 3 tile pattern fascia option on back panel of single last plus 3 tile pattern fascia option on back panel of single static . The tiles are held together by stiffeners & fasteners in 2 vertical metal trims. The productshould bear IGBC Green Pro certificate for the product, ISO Standards – ISO –9001:2015 (QMS Systems), ISO 14001:2015 (Environmental Management Systems) and ISO45001 – 2018 (Occupational Health & Safety Management Systems), And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design. OEM should have Green Co and Green guard UL certified for Compactor TWO BAY (SINGLE BODY MOVABLE H : 2080mm x W : 457mm X D : 915mm) TWO BAY ()DUAL BODY MOVABLE H : 2080mm X W : 457mm X D : 915mm) TWO BAY (SINGLE BODY FIXED H : 2080mm X W : 457 mm X D : 915mm ) THREE BAY (SINGLE BODY MOVABLE H : 2080mm x W : 457mm x D : 915mm) THREE BAY ()DUAL BODY MOVABLE H : 2080mm X W : 457mm X D : 915mm) THREE BAY (SINGLE BODY FIXED H : 2080mm X W : 457mm X D : 915mm ) 2 Office Chair -TC-V H : 890mm ±10 x W : 600mm ±10 x D : 600mm ±10. Medium Back Chair Made Of Good Quality Products Of MSPL Standard Models. Seat Plywood Made Of 12mm Hot Pressed . Upholstery PVC Structure Moulded With Prime Quality High Stretch Fabric Mesh. Seat Are Firmly Connected To The Base Structure 25mm Dia Round Metal Pipe. Understructure Base Made Of Chrome Plated 25mm Dia Round Metal Pipe Powder Coated. Chair Max Height 930mm. 470W x 450D Base Seat 60mm Thick Moulded With PU Foam D - 45kg/m3, H-20mm & W-470mm x H-530mm Back Seat PP Structure Moulded With Fabric Mesh . 475/580 Arm Rest Fixed Type PP. Arm Rest Height From Seat 180mm. Height From Seat To Ground 460mm. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design. 3 Office Table -Legend -02 W: 1500mm x D: 750mm x H: 750mm Table Top 25mm Thick PLPB Board With 2mm PvcEdgebanded Finish With As Per Approved Laminate Shade. Metal Structure Size W: 1450mm x D: 700mm x H: 725mm .Under structure Made Of Prime Quality CRCA 38x38mm Square Metal Pipe. Metal Modesty Panel Perforated Sheet With 0.8mm Thick Powder Coated. Worstation Provided Mobile Drawer ( 3D ) with Telescopic Channel, Fittings & C Type Handles & Lockes. Legs Of The Storage Movable PVC Casters. Legs Of The Workstation Hard Rubber Shoes. All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations. CO2 Welding Shall Be Used. All Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil, Grease, Dust, And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m² . Automatic Spray Coating Shall Be Applied To Be Followed By a Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.

INR 1000 /-

INR 45000.0 /-

INR 15 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB