|
| 1 | Excavating over areas, n exc 1.5 m deep and getting out in soft and loose soil all as specified and directed by Engineer-in- Charge. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers in soft and loose soil not exc 25 cm all as specified and directed by Engineer-in- Charge. |
| 3 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed by Engineer-in- Charge. |
| 4 | Material and labour for surface preparation of existing concrete components including grinding/rubbing carefully by grinder without damaging the existing concrete including cleaning the surfaces by blower , removal of external plaster wherever exists. Cost inclusive of transportation, labour conveying debris away from the Defence land, tools and tacklers, lead and liftand clean water thoroughly complete all as specified and directed by Engr-in-Charge. |
| 5 | Demolition of cement concrete ( reinforced) as in Roofs, floors (other than groundfloors), beams, staircases, landing,chajjas and similar suspended work (upto 7.5m height ) complete all as specified and directed. |
| 6 | Demolition of cement concrete ( reinforced) as in Roofs, floors (other than groundfloors), beams, staircases, landing,chajjas and similar suspended work (from 7.5m to 15m height ) complete all as specified and directed. |
| 7 | Demolition of cement concrete( reinforced) as in Roofs, floors (other than groundfloors), beams, staircases, landing,chajjas and similar suspended work (from 15m to 18m height ) complete all as specified and directed. |
| 8 | Demolition of cement concrete ( reinforced) as in Roofs, floors (other than groundfloors), beams, staircases, landing,chajjas and similar suspended work (above 18m height ) complete all as specified and directed. |
| 9 | M & L steel TMT bars , 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.Note: Cutting of rusted reinforcement & welding shall be inclusive in this item of work |
| 10 | M & L steel TMT bars, 8 to 10mm diain stirrups, spacers and binder, cut to length bent to shape required includingcranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.Note: Cutting of rusted reinforcement & welding shall be inclusive in this item of work |
| 11 | Supply & fix MS/TS dowel pins/staple/shear pins including drilling holes in concrete and providing labour but excluding the materials for grouting the pins etc complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Material & labour for repairing of damaged concrete portion by using superfluid dual shrinkage compacted structural grade M-40 micro concrete upto required height with all leads and lift with necessary scaffolding as directed including mixing, laying, levelling, finishing and curing complete all as specified and directed by Engineer-in-Charge.Make: Fosroc / SIKA / BASF / Krishna Conchem or equivalent approved . |
| 13 | Material and Labour for reinforced cement concrete RCC(Nominal mix)Type-B1 1:2:4 using 20mm graded stone aggregates as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engineer-in-Charge. |
| 14 | Material and labour for formwork using steel shutters or 12mm marine ply to have the smooth finish to pour the micro concrete/ concrete including de-shuttering etc complete all as specified and as directed by Engineer-in-Charge. |
| 15 | Material and labour for providing and applying rust cleaner of approved make over prepared reinforcement, including removing concrete all around reinforcement including from behind the reinforcing bars by manual methods such as hammering the rebar, using wire brushes, chiseling, etc. and applying rust removing solution of approved make with cotton waste swab to reinforcements etc complete as directed by Engineer-In-Charge.Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika |
| 16 | Material and labour for providing and applying two coats of anticorrosive epoxy phenolic rebar protective system IPNet RB of Krishna Conchem or equivalent of approved make and quality comprises of resin and hardener mixed as per manufacturer\"s instructions with minimum 9-10 hours between the coats, sprinkling dry sand when 2nd coat is tacky so as to provide rough finish and ensuring air curing of minimum 10 hours after the top coat before any subsequent treatment etc. including scaffolding etc complete all as specified and as directed by Engineer-in-Charge.Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE |
| 17 | Material and labour for providing and applying a priming cum bonding coat of two component Epoxide Resin conforming to ASTM-C-882-91 of approved make and quality to clean and sound concrete area by brush or any other established method by mixing base and curing agent 2:1 proportion by weight for joining old and new concrete as per technical specifications of manufacturer complete all as specified and as directed by Engineer-in-Charge.Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GENote-Work shall be carried out as per the manufacturers specifications & certificate on this account shall be taken from consultant and as approved by Engineer-in-charge |
| 18 | Material and labour for providing and laying 20 mm thick POLYMER MODIFIED MORTER over identified R.C.C. members in One layer in proportion as per approved make, blended to a required consistency and applying and finishing by floating, curing after initial setting time, including providing and inserting 10 mm mild steel shear key bars (minimum 3 nos per sqm), wherever required, bonding slurry, etccomplete all as specified and as directed by Engineer-in-Charge.Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE |
| 19 | Taking down cement plaster on brick or stone walls, ceilings etc, without disturbing brick work,including raking out joints, hacking for key, scrubbing down with water and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge |
| 20 | Material and labourfor rendering 10mm thick on internal wall surfaces using factory manufactured pre mix/ready mixplaster of \"Roofit Mix\" of M/s Premier Floor to Roof Materials Pvt Ltd/\"Easy plast\" of M/s Walplast Products Pvt Ltd/\"Readiplast\" of M/s Ultratech Cement Ltd\" / Soundp last PMC-1 of M/s Sound buildcare Pvt Ltd/or other approved equivalent make, having minimum composition of C:S : 1:6 using fully treated dry, well graded natural sand confirming to IS 383 suitable for plastering, having low rebound properties, low water demand for curing properties mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the Manufacturer and applied over masonry and concrete surfaces and finishing with sagol finish not less than 1mm thick, including cleaning the surfaces,curing and dubbing of plaster for levelling purpose complete all as specified & directed by Engineer-in-Charge. |
| 21 | Material and labour for rendering15 mm thick cement plaster in CM 1:4, two coats using factory manufactured pre mix/ready mix of \"Roofit Mix\"of M/s Premier Floor to Roof Materials pvt.ltd/ \"Easy plast\" of M/s Walplast Products pvt.ltd/ \"Readiplast\" of M/s Ultratech Cement Ltd/\"Soundplast PMC-1\" of M/s Sound buildcare pvt.Ltd/ or other approved equivalent make,including dubbing of plaster of 10 to 15 mm thick for levelling purpose with same ready mixplaster includingscaffolding at any height with all safety materials required for execution of work etc having minimum composition of C:S : 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechnIcal mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied over exterior masonry and concrete surfaces with base coat of 10 mm thick and finishing coat of 5 mm thick final rendering with water proofing compound @3% as per manufacturer\"s instructions, including using richer mix for making corners if necessary, at all floors and level, including making grooves of existing size wherever required,inclding sagol finish including cleaning the surfaces, curing including provide of 150mm chicken wire mesh fixed with nails at the junction of RCC columns/walls/ beams/ lintels and brick masonry at external faces before plastering including scaffolding at any height and all safety materials required for execute worketc. complete all as per specifications & as directed by the Engineer-in-Charge. |
| 22 | M&L for Integral waterproofing compound complete all as specified and dir by Engineer-in- Charge. |
| 23 | Material and labour for opening out cracks in wall surfaces in \"V\" shape by mechanicalgrinder and removing the loose material. filling with crack fillerof Dr. Fixit crack-X, shrink-free or equivalent all as per manufacturer\"s instructions and finishing the surfaces to match with existing finish complete all as specified and as directed by Engineer-in-Charge.Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE |
| 24 | Material and labour for preparation new plastered wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat ofacrylic primer upto a height of bldgroofincluding formwork/scaffolding/ladders and safety belts with precautions etccomplete all as specified and as directed by Engineer-in-Charge.Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/\"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India |
| 25 | Demolition of cement concrete(unreinforced ) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removal of rubbish to outside MD land etc complete all as specified and as per directed all as specified and as per directed |
| 26 | Material and labour for 100 mm thick cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing, path and finishing the surface even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Dismantling structural steel work including doors, gates, stairs but excluding framed truss etc. complete all as specified and directed. |
| 28 | S & F for structural steel work of Fe-290 Gde E-165 as Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete all as specified and directed. |
| 29 | S&F for structural steel work in Fe-290 Gde E-165for 6mm thick Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment |
| 30 | Material and labour for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer with necessary scaffolding / shuttering etc completeall as specified and as directed.Make: Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux |
| 31 | Dismantling of 150mm cast irondrain pipes, jointed in cement mortar and taking out of trenches, if required completeall as specified and as directed |
| 32 | S& F for 150mm Ductile iron pipe of K7 class having zinc coating with black bituminous coating on external layer with EPDM Tyton rubber ring jointing except all CI pipe fittings such as spigot bends, Tee pieces etc complete all as specified and directed by Engineer-in- Charge. |
| 33 | Demolition of cement concrete / cement lime concrete/mud faska (unreinforced in roof and terrace other than ground floor) of any description along with existing treatment APP including any type of tiles and removal of rubbish to outside MD land etc complete all as specified and as directed. |
| 34 | M & L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfaces complete all as specified and directed by Engineer-in- Charge. |
| 35 | M & L for APP based polymeric membrance minimum weighing 3 Kg/ Sqm & minimum 3 mm thickness reinforced with polyster non woven fabric (wt not less than 150 gms/ sqm) land on primed surface by forced application complete all as specified. including cement mortar screed 15mm thick inCM 1:6 mixed with water proofing compound and jointed,pointed in CM 1:3 mixed with 5% crude oil by weight of cement with solar reflcetive paint for slab and parapet wall portions. |
| 36 | Supply and fixing of sign board with LED backlit of size 20\"x2\" (6mtrx0.6mtr) made with ACP (Aluminium composite panel) board 3mm thick for writing words (MILITARY ENGINEER SERVICES, AGE B/R MALAD, GE NORTH SANTACRUZ, MES PUMP HOUSE etc) in multicolour configuration as directed, each board having average 65-70 words with Logo of military engineer services on both ends in colour (minimum height of words & logo to be 150mm). ACP board panel 3-4mm thick weighs typically 0.4 kg/sq ft, cut into words and fixed on acrylic sheet 3mm thick & back side of ACP board is sticked with Epoxy glue of low viscosity water resistant nature typically used on Wood, Alloy Steel, Glass, Ceramic, Aluminium, Plastic.Acrylic sheet to be fixed on aluminium frame having minimum thickness of 1 mmfrom front and tin/ACP box of 8 to 10 inches width provided on back side of acrylic sheet to support LED lighting frame illuminating on acrylic sheet. LED strip used shall be of white/warm white colour of supply voltage 220-240V of IP-67 grade and having waterproof nature. MS frame work for fixing of sign board and aluminium section for supporting of tin/ACP board. Electric point with conduit and switch board all as specified and directed by engineer in charge.Note - The rates are inclusive of all CP & taxes etc. |
| 37 | Material and labour for strengthening structural elements with non metallic composite fibre wrapping system comprise of unidirectional carbon fiber sheet (430 GSM) and compatible saturate profiling, applying compatible primer on prepared substrate, filling the holes and uneven surface with thixotropic epoxy putty etc, complete mechanized wetting of fibre sheet, cutting the fabric into required size, mixing the saturant and filling in tub area of saturation machine,placing the fibre on metallic rods and pass through the rollers of machine and saturate the tub ensuring complete wetting ( 65% fibre volume fraction ) of fibres, removing the fibre on rod and placing the new fibre sheet, wrapping the fibre sheet to structural elements at desired orientation using tampering roller to avoid any voids etc, repeating the same procedure for multiple layer with interval of 8 hrs, applying second coat of saturate after minimum 12 hrs after first coat, rectify air voids if any and finally rendering with 10mm thick in CM 1:6 including finishing even and smooth without using extra cement complete all as specified and directed by engineer in charge. Mode of measurement - Per sq.mt of surface area of carbon fibre sheet without lapping. Make- FOSROC/FIXIT/KrishnaConchem/Sika |
| 38 | Material and labour forcleaning with bleaching powder and removing all scale and dirt etc from tanks exc 250 but not exc 500 Ltrs capacityand from mouths of circulating pipes etc. complete all as specified and as directed. |
| 39 | All as per item No 38 described here-in-before but capacity exceeding 500 Ltrs but not exceeding 1000 Ltrs |
| 40 | All as per item No 38 described here-in-before but capacity exceeding 1000 Ltrs but not exceeding 2000 Ltrs |
| 41 | Dismantling PVC water tanks exc 250 ltr but n. exc 500 ltr capacity and removing to store. |
| 42 | Dismantling PVC water tanks exc 500 ltr but n. exc 1000 ltr capacity and removing to store. |
| 43 | Dismantling PVC water tanks exc 1000 ltr but n. exc 2000 ltr capacity and removing to store. |
| 44 | M & L for Rotational moulded polyethylene water storage tanks of capacity 500 Ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed by Engineer-in-Charge. |
| 45 | M & L for Rotational moulded polyethylene water storage tanks of capacity 1000 Ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed by Engineer-in-Charge. |
| 46 | M&L Rotational moulded polyethylene water storage tanks (Cylindrical verticval with closed top) hoisted & fixed in position in repairs all as specified of 2000 ltrs capacity complete all as specified and directed.. |
| 47 | S&F in repairs gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia all as directed. |
| 48 | S&F in repairs gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 25 mm dia all as directed. |
| 49 | S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight210 gms), fixed in repairs complete. |
| 50 | S&F in repairs Ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe of 25mm dia complete all as specified and directed. |
| 51 | Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed. |
| 52 | Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed. |
| 53 | Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed. |
| 54 | Mild steel galvanized steel tubing medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floors complete. |
| 55 | Mild steel galvanized steel tubing medium grade 20 mm bore with all fittings and fixed complete to walls and ceiling or laid in floors complete. |
| 56 | Mild steel galvanized steel tubing medium grade 25 mm bore with all fittings and fixed complete to walls and ceiling or laid in floors complete. |
| 57 | Demolition and breaking up drain pipes 100mm dia (Salt glazed ware, AC or Reinforced concrete) setin cement mortar |
| 58 | S & F for PVC SWR Single socketed rain water pipes/soil waste pipes with rubber ring joints in any length of 110mm dia fixed to wall. |
| 59 | S & F forPVC SWR Single socketed rain water pipes/soil waste pipes with rubber ring jointsin any length of 75mm dia fixed to wall. |
| 60 | S&F 110mm bore PVC (SWR) bends any radius |
| 61 | S&F 75mm bore PVC (SWR) bends any radius |
| 62 | S&F PVS(SWR) Vent cowl 110mm dia. |
| 63 | S&F PVS(SWR) Vent cowl 75mm dia. |
| 64 | S&F in repairs, bib taps fancy type chromium plated, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule of 15mmbore complete all as specified and directed. |
| 65 | S&F for2 way bib cock with side handle, flange and aerator bore dia of 15mm as in repairs complete all as specified and as directed by Engineer in Charge.Make Cera Cat No F1003161 or equvalent |
| 66 | Supply and fix in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 67 | S&F in repairs, angle cock/conceal stop valve fancy type cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mmbore complete all as specified and directed. |
| 68 | S&Fin repairs Pillar taps fancy type cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes 15mm bore complete all as specified and directed. |
| 69 | S&F in repairs vitreous china wash down white water closet pan (squatt pattern orrisa pattern complete size 580 x 440mm with integral footrest (excl flushing cistern & flush pipe) incl lime concrete etc complete all as specified and directed. |
| 70 | S&F in repair, vitreous china wash down water closet pan (Pedestal pattern), white with \"p\" or \"s\" trap (excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. complete all as specified and directed. |
| 71 | S&F PVC flushing cistern 10 ltr capacity white with inlet ball valve float flush pipe and handle including brackets and fixed in repair make : Slimline/Commander/Hindustan. |
| 72 | S&F in repairs flush pipeof polyethylene of low or high density of PVC 32 mm dia to squatt pattern closet including all joints and making good to the floor for low level cistern |
| 73 | S&F in repairs cast iron Nahani trap 75mm with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) |
| 74 | S&F PVC connection 15 mm dia and 450 mm long with both end socket fixed in repairs. |
| 75 | S&F in repair, vitreous china wash basin, white, flat back of size 550mm x 400mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed. Note:- Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately. |
| 76 | S&F in repairs vitreous china urinals,flat back of size 465mmX355mmX265mm,white with grating and union for discharge pipe including connecting to waste pipe complete all as specified and directed. |
| 77 | Supply only 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 78 | M&L for 75mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing path and finishing the surface even and fair without using extra cement all as specified and directed. |
| 79 | M&Lfor machine pressed precast concreteinterlocking paver block with grey cement and pigment any shape and size conforming to IS 15658- 2006 of 60mm thickness, M-35 grade including 25mm thick sand cushion below paver blocks and filling the joints with sand complete all as specified and directed. |
| 80 | M&L forchequered cement concrete tiles (glossy finish) with gray cementand no pigment 20 cmx 20 cmx25mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, over 15 mm thick cement screed bedding layer in cement mortor 1:6 complete all as specified and directed. |
| 81 | Providing, cement concrete of Type B1 1:2:4, 20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. |
| 82 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for. |
| 83 | Dismantling of Asbestos Cement corrugated sheet in roof coverings |
| 84 | S&Fframed work such as grills, gratings,barred iron doors, ladders, brackets of chajjasetc with ends of bar shouldered and/or Riketed or forged into spikes, framed guard bars etc confirming to Fe-290, Gde -E-165 complete all as specified and as directed by Engineer-in-Charge. |
| 85 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 86 | S & F Pre-painted galvalumealuminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensilestrength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 87 | M&Lfor preparing new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer. |
| 88 | M &L for preparation of old painted surfaces of steel of any description and in any position over 10 CM width or girth ,not otherwise described, and applying one coat of synthetic enamel paint complete including necessary scaffolding arrangement as required at site all asspecified and directed. |
| 89 | Demolition and breaking up drain pipes 150mm dia (Salt glazed ware, AC or Reinforced concrete) setin cement mortar |
| 90 | S&F UPVC (SWR) single socketed rain water pipes/ soil waste pipes with rubber ring joints, 150mm dia, fixed to walls complete all as specified and as directed by Engr-In-Charge. . |
| 91 | S&F UPVC (SWR) bends any radius, 150mm dia complete all as specified and as directed by Engr-In-Charge. |
| 92 | Demolition ofbrick work built in cement mortar and removal of debris out of MD land complete all as specified and directed by Engr-in-Charge. |
| 93 | M&L brick work with sub class \"B\" bricks, straight or curved on plan exc 6 m mean radius, built in cement morter 1:6 complete all as specified and directed by Engr-in-Charge. |
| 94 | M&L for 10mm thick rendering with cement mortar 1:6 on internal wall surfaces finishing even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 95 | M&L for Rendering 15mm (10+5mm) thick in CM 1:4 on brick or concrete surface finishing even and smooth without using extra cement but using of water proofing compound complete all as specified and directed.Note: Water Proofing Compound shall be measured saperatly. |
| 96 | Supply only integral water proofing compound. |
| 97 | M&L for preparation ofnew plastered surfaces of wall and applying two coats of Distemper oil emulsion over a coat of priming plastered and other surfaces with alkali resistant priming paint over 1.5 mm thick layer of wall care putty on wall complete all as specified and directed. |
| 98 | M&L two coats of Cement base paint over a coat of cement primerincluding preparation of new plastered wall surfaces. |
| 99 | M&L for PVC (SWR)floor trap, 75mm dia of outlet plain with grating including jointing with solvent cement Complete all as specified and as directed by Engineer-in-Charge. |
| 100 | Note:Deduct Credit for demolished / dismantled material of Rs. (-) 92,859.50 (Minus) as listed in Schedule of Credit.Tenderers will not quote against this item being a tentative amount to be considered to arrive at the \"Contract Sum\" |
