Providing Open Gym Equipments Children Play Equipment At Dasari Veedhi Of Ward No75 In Zone 6 Area Of Gvmc Limits, VISAKHAPATANAM-Andhra Pradesh

Providing Open Gym Equipments Children Play Equipment At Dasari Veedhi Of Ward No75 In Zone 6 Area Of Gvmc Limits-DOUBLE BOARD AB Switch , AERIAL STROLLER DOUBLE Knee Excise (L x W x H): Supply, Delivery, Installation and Commissioning of Knee Excise with main frame shall be minimum of 100mm NB dia of thickness not less than 5.00mm, handle frame & Seat frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Connecting link pipes shall be minimum of 25mm NB die of thickness not less than 3.60mm are of B class Medium grade of make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded. Maximum wait of 20 kgs 7 TRIPPLE TWISTER with prime pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Standing twister plate support pipe shall be minimum of 80mm NB dia of thickness not less than 4.5mm, Bottom frame support shall be inimum of 32mm NB dia of thickness not less than 3.6mm & Handle ring shall be minimum of 25mm NB dia of thickness notless than 3.60mm are of C class heavy grade with hot dipped galvanised with minimum of 60 microns zinc dipped joint with robotic welded. The twister plate is hinged over 80NB standing pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 90 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed for safety against ntrapment, corrosion & water resistant. The foundation pipes with anchoring shall be 750mm deep with inimum of 100mm NB dia supported with M.S. Angle . All plastic parts should solid poly propylene Co-olymer (PPCP) and UV stabilized should be used. All roducts of equipment should be manufactured as perEN 16630 safety norms and to be produced with one year warranty 8 FORE ARM TWIRL DOUBLE with centre pipe shall be of minimum 100mm NB dia of thickness not less than 5.00mm, Support frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & TAI CHI SPINNER rings shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of ?B? class Medium grade with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded with Handle knobs are made from high quality nylon material. 9 SKY WALKER DOUBLE with main frame shall be minimum of 100mm NB dia of thickness not less than 4.50mm & Handle pipes shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of ?B? class Medium grade with hot dipped galvanized with minimum of 60 microns zinc dipped joint with grips on top end. The handle pipes are hinged over 40NBmain frame with the help of especially Good quality bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e. 10 OVATE STEPPER with prime stand pipes hall be minimum of80mmNBdiaofthicknessnot lessthan4.50mm,pedallink pipe shall be minimum of 50mm NB dia of thickness not less than 4.1mm, handle frame pipes shall be minimum of 32mm NB dia of thickness not less than 3.60mm and handle grips shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of ?B? class Medium grade of with hot dipped galvanized with minimum of 60 microns zinc dipped joint with robotic welded. 16 Providing Open Gym equipments Children Play Equipment at Dasari veedhi Four Seater MGR ( PGMR 05 ) Technical Specification: ?MGR frame : MGR Frame made from 40NB pipes welded together with bottom end over a circular plate meant for assembling bearing assembly. The top end of the pipe is welded with a ISF & a plate for mounting the animal (duck) over it. The four 40NB pipe are hold together with four 25NB pipe to form a strong structure. The GI plated bowl is used to cover the top of the bearing assembly. ?Seat frame :20NB GI pipe bend and joint to form a frame structure with flat plate to mount seat. The frame is bolted to the MGR frame outer end. The frame is provided with spacers for foot rest. Hand Grip conforming to EN1176-1:1998. ?Bearing assembly :Bearing assembly with two bearings 1. Ball Bearing used for smooth rolling action. 2.Taper Roller Bearing take vertical thrust due to rolling moment & applied weight. The whole structure is mounted on heavy-duty bearing shaft permanently lubricated with water sealant. ?Center support : 80NB hot dip galvanized centre support pipe of length 500mm conforming to IS 1239 with GI thickness of 60µ .This pipe is welded with a 150x150mm base plate at bottom for fixing the foundation angles ISA & Circular plate on top with OD 200mm for assembling the bearing. ?Seat: MGR seat is made up of Fibber reinforced plastic(FRP). The attractive seat is made up of 3-5 mm thick fibe reinforced plastic. Seat designed to accommodate one child per seat with backrest; The seat is bolted to the assembly with special structure. The FRP material is tested for abrasion resistance & UTS(ultimate tensile test). 17 Providing Open Gym equipments Children Play Equipment at Dasari veedhi Malty Seater See Saw ( PGSS 10 ) Descriptions ? Product Area : 0.5m X 3m (1.6ft X 9.8ft) ? Safe Play Area : 1.5m X4m (4.9ft X 13.1ft) ? Ideal For : 3-10 Years ? Friends at a time : 4 Technical Specification: ?Handle grip: Hand Grip conforming to EN 1176-1:2008 for requirement of hand grip. It is made from 20NB Galvanized pipe with end caps ?See-saw lever: See Saw Lever made from 80NB Galvanized Pipe of 2950mm long conforming standards IS 1239 with strong load carrying capacity ?Seat :It is made from rotational moulded material. It is 295x190x70mm 18 Providing Open Gym equipments Children Play Equipment at Dasari veedhi S Loop Climber( FGPGSL 49) Technical Specification: ?SIDE FRAME:40NB MSpipe of length 2950mm , and 25NB MSpipe of length 500mm which are power coated conforming to IS 1239 with thickness of 60m are welded to each other to form a climbing structure for the child. A flat of 50mmX10mm is welded at the top of the side frame to be bolted to the top part. ?TOP PIPE: 80NB MSpipe of length 2955mm which are power coated and conforming to IS 1239 with thickness of 60m, profile plates of size 350X50X5 are welded on both the ends of the pipe. ?END CAP: MSend cap of 40NB are used in the side frame ?S Hook: Loops are hooked on Top pipe using Stainless Steel S-Hook of Dia 8mm ?LOOP: Loop is made up of 15 NB MSpipe for hanging purpose the loop pipes are placed at a equal interval form each other and are welded directly to the top pipe. ?Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron. ?Pipe Materials or Class: Medium Duty (B Class) & Light Duty (A Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe ued. ?Powder coating: shall be done of pure polyester exteriors ultra-stabilized powder Paints. Thickness maintained is a minimum of 60-70microns. ?Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. 19 Supply, Delivery, Installation and Commissioning of Roller Slide of Arihant / Equivalents make including transportation, installation, commission, Loading and Unloading etc.excluding civil work. for complete finished item of the work1) Pipes: Material Specification: The Spiral Slide is made up of Fiber Reinforced Plastic (FRP) in 3 parts with holding having shell thickness of 3 to 4mm. The slide is supported on a center support of 80 NB pipes. The landings supports of the slide are supported by 20 NB pipes. The Slide ladder is made up of 40 NB MSPipe & ladder hand ?railing is made up of 25 NB MSPipe. The triangular steps of the ladder are made up of 16 SWG G. I. Sheets. The safety railing of the slide is made up of 15 NB & 20 NB G. I. Pipe. The trader sand risers of the ladder are designed in such a way it won?t entrap child?s foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it.2) ) Nut and Bolts: Galvanized/ s.s./ Allen bolt/button head Allen bolt and nuts/nylon lock nuts are used with PVS bolt caps. 3) ) Material: Fibre Reinforced Plastic) with anti-skid surface on top 4) FRP (Fibre reinforced plastic): All the fibre reinforced plastic materials are processed by the hand laid process which is considered to be the best of its type. 20 Supply, delivery and Installation of Children play equipment of Rain bow climber with the following specifications exlcuding of civil work 1) Main frame structure: Main pipe 42.5mm OD support pipe hinged over with 25mm outer dia pipes. 2) Pipes: All metal pipes should be used heavy duty of Tata/Jindal make only with hot dipped galvanized pipes conforming to IS 1239 (Part 1) with GI thickness not less than 60 micron. 3) Welding: Welding shall be done with MIG welded and prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process should dressed of removing all sharp edges and burrs. 4) Powder Coating: It will be done with pure polyester raw material. Dry film thickness maintained within the range of 50-70microns. 5) Colour: Multicolour for optional or customized and as per RAL shade. 21 RIDERS:

Refer document

INR 13545.0 /-

INR 13.54 Lakhs /-