Tender For Cnb Nimbhora Tq.Kanna Dist.Chhatrapati Sambhajinagar - Excavation in all kinds of soil & soft murum including boulders upto 0.60 m diameter (0.113 cum) for canal, seating of embakement, filter drains / catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road / embakement as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with lead upto 1KM and 6 M lift. 2 Excavation in hard murum including boulders upto 0.60 m diameter (0.113 cum) for canal, seating of embakement, filter drains/catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with lead upto 1KM and 6 M lift. 3 Excavation in soft rock without blasting including boulders upto 0.60 m diameter (0.113 cum) for canal, seating of embakement, filter drains / catch water drains etc., and placing the excavated soft rock neatly in dump area or for formation of service road as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with lead upto 1 KM and 6 M lift. 4 Excavation in hard rock of all toughness by blasting including boulders above 0.60 m diameter (0.113 cum) minimising the damage to side slopes of excavation and placing the excavated rock neatly in dump area as directed including cost of all materials, machinery, labour, levelling bed etc., complete with lead upto 15 M and 6 M lift. 5 Providing laying rubble soling below foundation in layers including filling with rubble chips, murum etc. complete as directed. 6 Providing and fixing including Cutting, bending hooking, laying in position and tying M. S./HYSD/TMT bars for reinforcement of R. C. C. works as per detailed drawing etc. completed 7 Providing and laying in situ cement concrete of grade M 150 (40 MSA) of trap /granite / gneiss /quartzite graded metal for PCC with or without surface reainforcement RCC concreting requiring heavy of special type of shuttering for works of gallery, sluice, spillway crest, spillway down stream face, energy dissipating structurs, intake structurs, training walls piers, abutment etc with batching plants and Transit mixer with shuttering and scaffolding curing eto completed with an initial lead 50 m. and lift 1.50 m. 8 Back filling upto ground level behind the ground level behind the canal structures etc. completed (without royalty) with suitable material of approved quality in layers not exceeding 20 cm. without disturbing the structure etc. completed. 9 Providing casing embankment using selected impervious material available directly from excavation in layers including cost of materials, machinery, labour, all other operations such as collection of material, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges/ sides, watering compacting each layer to density control of not less then 95 percent or as stipulated using vibratory compactor etc., completed with lead upto 1 km for watering and 6m lift. 10 Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per sqm using stones and stone chips from approved sources including cost of all material, labour, hand packing/wedging stone chips, finishing etc.completed with lead upto 50 m and lifts as directed. 11 Providing and and fixing canal information bord of 1.2 x 0.75 m prepared on 16 gauge M. S. Sheet with angle iron frame of size 35 x35x3 mm with cross bracing of size 25 x 25 x3 mm including painting with one coat of zinc chromate storing primer and two coats each of green / white back ground and back side grey store enameld bonded with red retro reflective sheets Engineering grade, border/letters/numeral / arrows coated non peal able crystal clear protective transparant coat retaining 100% reflection including two angle ron post of size 50 x50x 5 mm of 3.65 m long inflated at bottom drilled on top and painted with black bonds of 30 cm with four numbers high strength of G. I. bolts and nuts of size 10 mm dia. 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing, in ground with cement concrete in M-15 block of size 60 x60x 75 cm as directed by Engineer-in- 12 Insurance 13 Royalty 14 GST 15 Tender Amount Rs.1952711/-
