}

Tender For Construction Of Material Testing Lab At Ganga Barrage District Kanpur For Material Work - Earth (Incl. Cartage) 2 Local Sand 3 Cement (P.P.C) 4 Cement (Opc) 5 40 Mm Grit (From District Gwalior (Mp) Quarry) 6 10-20 Mm Grit (From Distr, Kanpur Nagar-Uttar Pradesh

Uttar Pradesh Jal Nigam has published Tender For Construction Of Material Testing Lab At Ganga Barrage District Kanpur For Material Work - Earth (Incl. Cartage) 2 Local Sand 3 Cement (P.P.C) 4 Cement (Opc) 5 40 Mm Grit (From District Gwalior (Mp) Quarry) 6 10-20 Mm Grit (From Distr. Submission Date for this Tender is 10-04-2025. Construction Material Tenders in Kanpur Nagar Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

48504674
Tender For Construction Of Material Testing Lab At Ganga Barrage District Kanpur For Material Work - Earth (Incl. Cartage) 2 Local Sand 3 Cement (P.P.C) 4 Cement (Opc) 5 40 Mm Grit (From District Gwalior (Mp) Quarry) 6 10-20 Mm Grit (From Distr
Open Tender
NCB
Uttar Pradesh
Kanpur Nagar
10-04-2025

Tender Documents

Tender Details

Tender For Construction Of Material Testing Lab At Ganga Barrage District Kanpur For Material Work - Earth (incl. Cartage) 2 Local Sand 3 Cement (P.P.C) 4 Cement (OPC) 5 40 mm Grit (From District Gwalior (MP) Quarry) 6 10-20 mm Grit (From District Gwalior (MP) Quarry) 7 Coarse Sand (From District Bhind (MP) Quarry) 8 Steel 8 mm 9 Steel 10mm 10 Steel 12mm 11 Steel 16mm 12 Steel 20mm 13 Steel 25mm 14 MS Angle, Channel, Tee, Sheet, Pipe etc. 15 Brick M-150 16 Brick M-100 17 Extruded burnt flyash clay sewer bricks conforming to I.S 4885 - 1988 18 Stone Boulder 25-40 kg (From Khera Thakur Quarry) 19 Interlocking Tiles (I Shp.) 30 Mpa 80mm Grey 20 Interlocking Tiles (I Shp.) 30 Mpa 100mm Rubber moulded Coloured 21 Kerb Stone M20 (R.M.C.C.) 12x12x6 22 Plane Glass 4.00 mm thk. 23 Glass Strip 40mm wd. 4mm thick. 24 Glazed Tiles 300mmx450mm 25 Chequered Tiles Precast 300mmx300mm 26 Vitrified Tiles 600mmx600mm 27 Vitrified Tiles Anti Skid 600mmx600mm 28 Oil Bound Distemper (White) 29 Oil Bound Distemper (Coloured) 30 Synthetic Enamel 31 Exterior Emulsion Paint (Apex) 32 Red oxide Zinc chromate primer (Metal) 33 Primer (Wood) 34 Water Proof Cement Paint 35 Mosquito/Fly Proof SS G-304 wire Mesh; 0.50 mm Dia; 1.40 mm wd. 36 Block board construction flush door with commercial ply on both faces 30 mm thick. 37 Block board construction flush door with commercial ply on both faces 35 mm thick. 38 False Ceiling Perfo.Tiles 60cmx60cmx12mmthk. 39 False Ceiling Perfo. Deco.Tiles 60cmx60cmx12mmthk. 40 White Cement 41 Granite 42 Red Sand Stone 40 mm 43 Red Sand Stone 30 mm 44 Flush Door 30mm thk. commercial ISI 45 Acrylic emulsion paint 46 Cement base wall care putty 47 Cement primer 48 Tarpine Oil 49 Water-proofing Cement Compound/Polymer modified cementation coating 50 Bitumen VG-10 grade 51 Glass Fiber cloth 52 Cinder 53 Polyvinyle chloride sheet 400 micron thk. 54 ATT Oil 55 Block board construction flush door with commercial ply on both faces 25 mm thick 56 For flush door shutters Extra for providing teak veneering on one side instead of commercial veneering 57 Supplying Anodised aluminium sections for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, dash fasteners of required dia and size, including necessary filling up material for the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 58 Supplying stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., with necessary stainless steel nuts and bolts complete, necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 59 Water proofing cement paint

Key Value

Document Fees
INR 5900 /-
EMD
INR 140000.0 /-
Tender Value
Refer document

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail