}

Annual Rate Contract Of Various Works At Various Places In West Side Of Suratgarh Road, Sri Ganganagar - Dremantling Old Plaster M Skirting Raking Its A Cleaning The Surface For Plaster Mcluding Disposal Of Rubbish To The Dumping Ground Within 50 Meter Fe, Ganganagar-Rajasthan

Urban Improvement Trust has published Annual Rate Contract Of Various Works At Various Places In West Side Of Suratgarh Road, Sri Ganganagar - Dremantling Old Plaster M Skirting Raking Its A Cleaning The Surface For Plaster Mcluding Disposal Of Rubbish To The Dumping Ground Within 50 Meter Fe. Submission Date for this Tender is 22-04-2025. Paver Blocking Tenders in Ganganagar Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

48499196
Corrigendum : Annual Rate Contract Of Various Works At Various Places In West Side Of Suratgarh Road, Sri Ganganagar - Dremantling Old Plaster M Skirting Raking Its A Cleaning The Surface For Plaster Mcluding Disposal Of Rubbish To The Dumping Ground Within 50 Meter Fe
Open Tender
Indian
Rajasthan
Ganganagar
22-04-2025

Tender Documents

Tender Details

Annual Rate Contract Of Various Works At Various Places In West Side Of Suratgarh Road, Sri Ganganagar - Dremantling old plaster m skirting raking its a cleaning the surface for plaster mcluding disposal of rubbish to the dumping ground within 50 meter fend Demolishing back work manually by mechanical means including stacking of serviceable maternal and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charpe Earth work in excavation by mechanical means (Hydraulic Iscavato manual means in foundation trenches of drains not exceeding 15 m in width or 10 sum on plan) mcluding dressing of sides and ramming of bottoms, lift upto 15 m. including taking out the excavated soil and depositing and refilling of thin with watering & ramming and disposal of surplus excavated soul as directed with in a lead of 50 meter All kinds of souls Providing and laying in position cement concrete including cuing, compaction etc complete in specified grade excluding the cost of centering and shuttering All work up to plinth level 148 (1 cement 4 coarse sand 8 graded stone aggregate 40 mm nominal size) Brick work with common burnt clay FPS (Non Modular) bricks of class designation 75 in foundation and plinth with Cement mortar 16 (1 cement 6 coarse sand) Lensering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation, footings, strap beam, raft, bases of columns etc Lentering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and тепина of formwork for upto flee five level fut Suspended floors roots Landings staircases balconies, girders, cantievers bands coping bed plates, anchor blocks, sills, chimyje lintel team plinth beam etc Brick work with commun burnt clay IPSINon Modular) bricks of class designation 75 in superstructure above plinth level upto floor five level in all shapes and sizes in Cement mortar (16) Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing compaction finishing with tendering in cement sand mortar 1311 cement 3 course sandy and making good the joints and cost of plasticctal if required) cacluding the cost of centering shuticing and reitfutucment M20 grade Nominal Mix Design Mix Providing and laying in position specified grade of cemasa concrete for RCC structural elettients upto flour fine leves including curing compaction finishing with rendering in cement sand mortar 1311 cement cualse sand and making good the joints and cost of plastizeist if requited) excluding the cost of centering shuttering and reinforcement for Scans suspended floors, roofs, griders having slupes up to 15, landings, balconies, shelves, chajjas lintels, bands, plain windows sills, staircases and spiral staircases etc M20 grade Nominal Mix Design Mix Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to Noor five level Thermo-mechanically Treated bars (Conforming of relevent IS code) Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 125 mm thickness meluding hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1 2.5mm pressed mild steel welded or rigidly fived together by mechanical means, adjustable lugs with spht end tail to each jamb including steel butt hinges 25mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with CC 124(M15 grade) complete as directed by Engineer-in-charge Profile E Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (Icement: 3 coarse sand 6 graded stone aggregate 20min nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required:Windows fixed S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Alumínium beading 20x3mm with suitable screws not exceeding 150mm distance at all heights with all lead and lift with scafolding Providing and fixing Square bars or other flat welded to window, ventilatiors etc. Providing and fixing M.S. sheet Imm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint Repair to brick masonary in cement sand mortar 1:6 with new brick Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 14 cement 4 coarse sand) Plaster on new surface on walls in cement sand mortar 16 including racking of joint etc complete fine finish 12 mm thick. Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 13 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete For area of each slab from 2001 to 5000 Sqcm Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding. New work (two or more coats) over and including scrapping and priming coat with cement primer internal plaster Painting with synthentic enamel paint of approved brand and manufacture to give an even shade Two or more coats on New Work Grading reof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) Providing and fixing 20 mm thick precast terrazo tiles of approved make, with marble chips of size upto 6mm laid over roof with neat cement slurry mixed with pigment to match the shade of the tiles, including cutting grinding rubbing with machine complete on 20 mm thick bed of cement sand mortar 14 Providing and laying in position cement concrete including curing compaction etc. complete in specified grade excluding the cost of centering and shuttering 1: 1.5: 3 M 20 Grade nominal mix (1 cement, 1.5 coarse sand, 3 graded stone aggregate 20 mm nominal size). B-3, 3.1.1, BSR) Steel work in built up tubular trusses including cutting, hoisting (height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished welded type tubes. Providing and fixing steel gate, grating, and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide Extra if square, rectangular hollow tubelar sections are used or grill made by flats only Construction of embankment with approved material obtained from borrow pit with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of table 300-2 including cost of compensation for earth taken from private land complete as per MoRT&H specification clause 305. (Lead taken upto 5 km) Providing and laying factory made chamfered edge plastic coated designer cement concrete paver blocks of required strength. thickness and size/shape, made by table vibratory method, to attain superior smooth finish using PU or equivalent moulds, laid in required Grey/yelow/Red or any other colur and pattern over 50mm thick compacted bed of Coarse sand, compacting and proper embedding/laying of inter locking paver blicks into the sand bedding layer through vibratory compaction by using plater vibrator gilling the joints with fine sand and cutting of paver blocks as per required seze and pattern, finishing and sweeping extra snad in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per manufacturers sepecifications and direction of Engineer-in-charge. 80 mm thick CC interlocking paver of M-30 grade with aproved colour design and pattern Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 13 (1 cement: 3 coarse sand) including making joints with without grooves (thickness of joints except at sharp curve shall not to more than 5mm) meluding making drainage opening wherever required complete including pamting etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment) (Precast CC kerb stone shall be approved by Engineerm-charge). Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. By mechanical means with all lead Grading III Material Providing, laying, spreading and compacting stone aggregate having physical requirement as per table 400-8 and of specific sizes as per table 400-9 to Water Bound Macadam specification including spreading in uniform thickness, hand packing rolling with vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening and binding materials to fill up the interstices of coarse aggregates watering (with water browser) and rolling, making necessary earthen bund to protect edges, lighting, guarding. barricading and maintenance of diversion etc. [MoRTH specification Clause 404 & 112Using Screening Crushable type such as Moorum or Gravel Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes.) Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines of groove etc complete but excluding the cost of nosing of steps etc. complete 40mm thick with 20mm thick nominal size aggregate P& Fist quality Vitrified Porcelain Polished tiles on floor, skirting and steps etc in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1:4 including grounting the joints with white cement and matching pigment etc complete 600 x600 mm P&F Ist quality Vitrified Porcelain Polished tiles on floor, skirting and steps ete in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1:4 including grounting the joints with white cement and matching pigment etc complete. 450 x450 mm Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS 13753 & IS 15622 of size 200mm x 300mm in walls, floors, steps, pillars ete laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar) P&F WVC wash basın (1st quality, IS 2556 Mark) of approved make with C1 Brackets duly pamted, 1 NO 15 mm. CP Pillar cock (1S 8934 mark) & 32 mm CP brass waste coupling of approved make. 25 mm G1 Waste pipe complete including cutting & making good the wall Size 550mm x 400mm P&1 Ist quality WVC Urinal (IS 2556 mark) with 25mm dia G1 waste pupe, dome waste couplings, concealed tron brackets on screwS ete complete Flat Back (small) size 456355265mm P&F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm Makrana 11 quality marble having light spots Providing & Fixing Premium Quality white glazed vitreous china Sanitary Wares (18 2556 Mark) of approved make as per direction of Engineer-in-charge including cutting and making good the wall and floor Universal (anglo-Indian type) with Por S trap Double Syphonic European W.C. with mounted W.V.C flushing cistern of 10 litre capacity complete with all necessary internal fittings with Hydraulic seat cover. P & F Indian type white glazed vitreous china Ist quality W.C. orissa pan (IS 2556 Mark) with 100 mm vitreous china Por S trap including cutting and making good the wall and floor: Size 530x410mm. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/e fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge (Internal work Exposed on wall) 15mm P&F Bib cock (IS 8931 Mark) Superior quality of approved make Brass 400gm 15mm nominal bore P&F Full-way Valve (IS 778 Mark) or wheel valve of approved make Gun metal 25 mm nominal bore P&FPVC storage tank confirming to (15 12701 indicating the BIS license No) of approved make with cover, 25mm dia I M long G1 Over-flow pipe & 25 cm long wash out pipe with plug & socket, including making connection etc, complete of approved design 1000 liters capacity P&Frigid PVC pipe (IS 4985 mark) class 11 (4 Kg Per Cm 2 approved quality/make including jointing the pipe with solvent cement rubber ring and lubricant 110mm dia Construction of soakage well in all types of soil of approved drawing top 50cm portion in 450mm thick masonry with CM 1.6. 80mm thick stone slab covering, jointing of slab in CM 13. Ralthal, Kharanja 40mm thick M-15 grade CC flooring earth work etc complete incl disposal of surplus earth within alead of 50mtr Inner dia 90cm & 10 to 12 mir deep Construction of septic Tank in all types of soil with 40 Cm thick masonry in CM 16, 15 Cm thick CC bed of 15 10, M 15 grade CC flooring & over stone slah covering 80 mm thick slab jointing of slab in CM 13 Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 16 finished with neat floating cement, 4 Nos Cl foot rests of approved design two No 450 mm dia each Ferro cement cover with frame, earth work ete complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr Size 400 x140x150 cm (for 50 users) Size 230 x110 x150 cm (for 20 users) Size 200x100x130 cm (for 10 users) Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters. Floors ete laid on 12mm (Av) thick base of cement mortar 13 (1 cement 3 coarse sand) jointing with white cement mortar 12 (1white cement 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Black/South 1501 Cm2 to 3600 Cm2 Tiles Finishing walls with water proofing cement paint of required shade including all scaffolding. New work (Two or more coats applied @ 3.84 kg/10 sqm). P&F Kitchen & Lab. Sink of approved make with C.I brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor: 1.0 mm thick stainless steel AISI 304 & IS 13983-1994 kitchen sink of approved make as per Engineer-in-charge with large waste coupling. 24 x 18 x 8 20x16x8 Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4, with ceiling pointing in cement sand mortar 13 complete as per specification and instruction of Engineer In Charge Upto 2.00 metre. Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) Light shade using white cement P&F European type white glazed vitreous china Ist quality W.C pan (IS: 2556 Mark) with Por S trap including cutting and making good the wall and floor P&F Ist quality WVC Urinal (IS 2556 mark) with 25mm dia G.I waste pipe, dome waste couplings, concealed iron brackets or screws etc complete WVC Flat Back size 430x260x350 mm/Wall corner 340x410x265 type liped front. Water tanker 6 kl. capacity etc.

Corrigendum Details

Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
1 05-04-2025 Date Extend 22-04-2025

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
INR 25 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail