Tender For The Work Of Supply & Erection/Installation Of Tail Less Unit, D.O. Fuse Set, Boots And Sleeves & Diffrent Types Of Material Use In Dtr Protection(Bp 2024-25 Part-1) Edd-Ikasganj Under The Juridiction Of Edc, Kasganj On Semi Turn-Key Basis. - Su, kasganj-Uttar Pradesh

Tender For The Work Of Supply & Erection/Installation Of Tail Less Unit, D.O. Fuse Set, Boots And Sleeves & Diffrent Types Of Material Use In Dtr Protection(Bp 2024-25 Part-1) Edd-Ikasganj Under The Juridiction Of Edc, Kasganj On Semi Turn-Key Basis. - Supply Of Material by the Contractor 2 Do Fuse Set 3 M.S. Top Channel (125x65x2240 mm.) 4 Holding Clampsfor MS Top Channel 5 Tail Less Unit 500A/650V with fitting suitable for PCC/STP Pole. 6 Nut, Bolt & Washer 7 M.S. Angel with clamp and nut & bolt 8 M.S. Earthing with earth rod as per respo norms 9 Boots & Sleeves 10 Al Lugs 120 Sq.mm 11 Distribution Panel Box No.2 Circuit with stud type tail less unit 500 Amp, 650 V with brass holding studs, copper contacts, Height of Tail less unit 48 inch width 3 inch and pannel size H-1650+300 mm, W-750 mm, D-520 mm & thickness of CRCA sheet Gauge 14x16 along with Alu busbar of size 50x6 mm for Phases & neutral with color code heat shrink sleeve and mounting stand of 40x40x5 mm MS Angle with earthing arrangement. 12 Distribution Panel Box No.3 Circuit with stud type tail less unit 500 Amp, 650 V with brass holding studs, copper contacts, Height of Tail less unit 48 inch width 3 inch and pannel size H-1650+300 mm, W-1400 mm, D-520 mm & thickness of CRCA sheet Gauge 14x16 along with Alu busbar of size 50x6 mm for Phases & neutral with color code heat shrink sleeve and mounting stand of 40x40x5 mm MS Angle with earthing arrangement. 13 Distribution Panel Box No.4 Circuit with stud type tail less unit 500 Amp, 650 V with brass holding studs, copper contacts, Height of Tail less unit 48 inch width 3 inch and pannel size H-1650+300 mm, W-1400 mm, D-520 mm & thickness of CRCA sheet Gauge 14x16 along with Alu busbar of size 50x6 mm for Phases & neutral with color code heat shrink sleeve and mounting stand of 40x40x5 mm MS Angle with earthing arrangement. 14 Safe Carriage of following/ any other material from Electricity Store Center Soron/Etah/Aligarh to pit site of work from the Kaccha & Pakka Road including loading & unloading at the respective ends including the cost of arrangement of labour, T&P etc. which required for Topper completion of work. 15 LT XLPE Cable Al. 1x120 Sq.mm. 16 ACSR Weasel Conductor for Jumpering 17 Erection of Material 18 Erecetion/Installation of D.O. Fuse Set 19 Fixing of M.S. Top Channel (125x65x2240 mm.) with all accessories. 20 Foundation of Distribution Panel Box No.2 Circuitwith fixing arrangement & replacement of Cable with Lugs. 21 Foundation of Distribution Panel Box No.3 Circuitwith fixing arrangement & replacement of Cable with Lugs. 22 Foundation of Distribution Panel Box No.4 Circuitwith fixing arrangement & replacement of Cable with Lugs. 23 Installation of Pipe Earthing upto 60 Feet min Water Lable as per RESPO norms. 24 Fixing of Tail Less Unit 500A/650V with fitting suitable arrangement like Bus Bar etc. for PCC/STP Pole. 25 Erection of M.S. Earthing with earth rod as per respo norms. 26 Installation of Boots & Sleeves with fixing arrangement.

INR 3540 /-

INR 88000.0 /-

Refer document