Tender For Arc Of Painting Jobs For Year 2025-26 => Limited; 1 Preparation of surface, supply and application of requsite coats of primer and paint as specificied including providing ground/ base colour and colour coding bends in piping, making arrows, fluid description and line number and hazard signs on piping stencelling names and number on vessels tools consumable, all hieght, supply of all material, tools consuable, testing appliances, labour supervisior, etc to complete the painting work in all respect and per direction on Towers, Columns, Vessels, Tanks, pipelines Heat Exchangers, Machinary etc as given below : 2 Primer and paint suitable for temp.above 65 Deg.C. and upto 120Deg C with one coat of Epoxy Red Oxide Zinc Chromate permier and two coats of Epoxy finish paint Refer to Table-I S. no P2 and F1. 3 Primer and paint suitable for Temp.upto 120 Deg C one coat of Red Oxide Zinc Chromate and Two coats of synthetic enamel finish paint Ref Table -I S. no P1 and F6 4 Primer and paint suitable for Temp.upto 120 Deg C with one coat of Red Oxide Zinc Chromate and two coat of heat resisting Aluminium paint, RefRef Table -I Sr no F3 5 Paint with two coat of heat resisting Aluminium paint suitable for temp. above 120 Deg C and upto 250 Deg CRef Table I Sr no F4 6 Primer and paintwith one coat of Zinc Phospate perimer and two coats fo Chlorinated rubber paint of finish surface Ref. Table-I S.No.P3 and F2. 7 Primer and paint one coat of red oxide zinc chromate primer and two coats of anti corrosive black bitumen(IS-158)Ref.Table-I S.No. P1 and F5 8 Paint with two coat of heat resisting Aluminium paint suitable for temp. above 250 Deg C and upto 600 Deg CRef Table I Sr no F7 9 Preparation of surface of Towers, columns, vessels, tanks,heat exchangers, piping rotors,impellers,diffusers etc.by sand, ash & grid blastingprocess and including arrangement of sandash & grid blasting equipment/ tools,tackles labour supervision etc. and by buffing wheel on : 10 Application of one coat of suitable paint on Towers, column, vessels, tanks, heat exchanger,pipnig and steel structures etc.: 11 Applicatio of one coat of Synthatic enamel finish paint Ref. Table-ISr.No.F6. 12 Aplication of one coat of Epoxy finish paints Ref. Table-ISr.No. F1 13 Application of one coat of Aluminium paint on fencing of single barbed wire up to 2m height Ref Table no-1 Sr No-3 14 Painting of following transformers with synthetic enamel ready mix grey colour after preparation of surface by rubbing/ scrapping of surface, cleaning of all dust, dirt & other foreign material and application of primer including supply of all types of consumables/ non-consumable materials, tools & tackles as specified in scope of work, General Terms & Conditions of contract, Special Terms & Conditions of contract and applicable Indian Standards & CPWD Specifications of following ratings & capacities at various locations in Plant & Township 15 132/11 KV,20/26.5 MVA and / or 25/31.5 MVA Power Distribution Transformer including NGR 16 11/3.3 KV, 10 or 6.3 MVA Power Distribution Transformer including NGR 17 11KV/415 Volts, 2 MVA/1.6 MVA Power Distribution Transformer 18 11KV/415Volts, 1000/500 KVA Power Distribution Transformer 19 Lighting Transformer above 50 KVA & upto 200 KVA 20 Lighting Transformer upto 50 KVA 21 E S P Transformers 22 Painting of following motors with two coat of Epoxy painting after application of epoxy primer and strictly as per job specifications and instructions of Engineer in charge 23 11KV Motor 24 3.3KV Motor upto and including 350 KW 25 3.3 KV Motor above 350 KW upto and including 750 KW 26 3.3 KV Motor above 750 KW 27 LT motor upto 1 KW 28 LT motor above 1 KW but upto and including 3.7 KW 29 LT motor above 3.7 KW but upto and including 11 KW 30 LT motor above 11 KW but upto and including 37 KW 31 LT motor above 37 KW but upto and including 75 KW 32 LT motor above 75KW but upto and including 125 KW 33 LT motor above125KW 34 Painting of folloing motors with synthetic enamel paint after application of primer and strictly as per job specifications and instructions of Engineer in charge 35 3.3KV Motor upto and including 350 KW 36 3.3 KV Motor above 350 KW upto and including 750 KW 37 3.3 KV Motor above 750 KW 38 LT motor upto 1 KW 39 LT motor above 1 KW but upto and including 3.7 KW 40 LT motor above 3.7 KW but upto and including 11 KW 41 LT motor above 11 KW but upto and including 37 KW 42 LT motor above 37 KW but upto and including 75 KW 43 LT motor above 75 KW but upto and including 125 KW 44 LT motor above125KW 45 Painting of various sizes of poles of 11KV over head lines, street light, flood light masts with aluminium paint after cleaning and preparation of surface and application of primer strictly as per Scope of work and instructions of Engineer in charge 46 11KV overhead line rail poles/MS channel box type,flood light masts of height about 30 feet 47 Steel tubular street light poles of height about 25 feet 48 Light mast of height above 10 feet & upto15 feet 49 Light mast of height above 8 feet & upto10 feet 50 Light mast of height upto & including 8 feet 51 Railway yard/Coal yard Tower 52 Painting of PCC pole with water proof cement paint after surface preparation ,cleaning and application of primer strictly as per job specfication and instruction of Engineer In charge 53 Painting of switch yard/transformer yard, fencing ofheight upto 2.50 MR with two coats of aluminium paint after aplication of one coat of primer strictly as per job specifications and instruction of Engineer In charge 54 Painting of ladder type cable trays with one coat of Epoxy primer & 2 coats Epoxy paint 55 Upto 200 mm width 56 Above 200 mm and upto 400 mm width 57 Above 400 mm and upto 600 mm width 58 Above 600 mm and upto 800 mm width 59 Above 800 mm and upto 1050 mm width 60 Above 1050 mm width 61 For lettering/stenciling 62 up to 10 meter height of equipments walls 63 From 10 meter to 20 meterheight of equipments/walls 64 From20 meter to 30meter height of equipments/walls 65 Mandays 66 Painter
