Replacement And Rectification, Fabrication Erection Of Various Bends, Overhaul Of Various Equipments Pertaining To Ash Pump House Stage-I /Dr.Nttps During The Year 2025-2026., ibrahimpatnam-Andhra Pradesh

Replacement And Rectification, Fabrication Erection Of Various Bends, Overhaul Of Various Equipments Pertaining To Ash Pump House Stage-I /Dr.Nttps During The Year 2025-2026.-Arranging dummy plate for 1st, 2nd and 3rd series at suction side of ash slurry pumps Overhaul of Hydroseal Ash slurry disposal pump TypeD-85-D Overhaul of Hydroseal Ash slurry disposal pump type D-135-8 Draining the existing water and maintain a minimum level in case of passage of water through plug valve in 1st and 2nd Ash slurry pumps during replacing of 1st row ash disposal pump Metal building up of eroded parts of Hydroseal Ash slurry disposal pumps type D-135-8 and D-85-D Replacement of V-Belts of D-85-D & D-135-8 of Ash Disposal Pumps Patch welding work on MS line inside and out side the Ash pump house upto Butterfly valve. Fabrication of 300 / 400mm spool pieces Replacement of 300/400 mm damaged spool pieces in ash series Replacement of damaged 400 NB M.S. Pipe Replacement of damaged 300 NB M.S pipe Replacement of damaged 200mm MS pipe with new one Replacement of damaged 80/100mm MS pipe with new one Arranging single / double sleeve joints in place of damaged sleeve or hole formed side of the sleeve joint of 400 mm MS/CI pipe in side the ash pump house Opening of the sleeve joint in the Ash pump house wherever necessary for flushing of the lines to clear the ash settled in the pipes and fixing the same after completion of the work. Replacement of worn-out / leaking / damaged sleeve gaskets in ash pump house Removal of accumulated ash back side of the pump house Overhaul of 300/400 NB Butterfly valves on discharge side of Hydro seal pumps Replacement of damaged bed bolts of D-135-8 & D-85-D ash slurry pumps Replacement of liner gasket/shell for D-85-D Ash slurry pumps Replacing broken / hole formed inner shell of D-85-D & D-135-8 of Ash Disposal Pumps Replacement of worn-out/damaged 300/400 NB M.S bends Replacement of worn-out/eroded 300/400NB MS bends in Ash pump house wherever necessary, with fabricated 300/400NB MS bends including fabrication, erection, strengthening/ shrouding and breaking of the existing concrete pedestal. Extra strengthening of 300/400NB MS bend providing shrouding pipe on bottom position to increase the life of the bend Replacement of 200mm gate/globe valves Replacement of 150mm gate/globe valves Replacement of 100mm gate/globe valves Replacement of 65mm gate/globe valves Overhaul of Bliz pump 200 T capacity at ash pump house Labour charges for overhaul of seal water pumps Isolation of the sump by closing plug valve, chipping, Cleaning and removing the settled ash on the sides and bottom of the sump, replacing the liner plates, wherever necessary cleaning and agitating nozzles and welding nozzles whenever necessary restoring normalcy by opening the plug valve of Ash slurry sumps 1 & 2 Chipping the hard settled ash in and around the plug valves seating and in the plug hole, removing the ash and cleaning the valve seat and plug hole Replacement of 400mm gate/globe valves Replacement of 300mm gate/globe valves Upkeeping of Ash Pump House Building and surrounding area. Replacement of discharge adaptor Joint gasket for D-135-8 Ash slurry pump Replacement of discharge adaptor piece for D-135-8 Ash slurry pump

Refer document

INR 4715.0 /-

INR 9.43 Lakhs /-