Tender For Establishment Of Garden Gym Near Samriti Bhawan Community Hall At W No 28 Gurha Bakshi Nagar Jammu Under Mplad, Jammu-Jammu And Kashmir

Establishment Of Garden Gym Near Samriti Bhawan Community Hall At W No 28 Gurha Bakshi Nagar Jammu Under Mplad- 1 Providing designing and fixing of Air Walker of following specifications:- Size: 1070*460*1360mm Main Post: 140 mm dia and 3.0mm thickOther Pipes: 88mm dia 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments duly oil sealed and self lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover 2 Horse rider Station: Providing designing and fixing of Rider of following specifications:-Size: 1100 x 550 x 1480mmMain Post: 140 mm dia and 3.0mm thickOther Pipes: 60mm dia 2.5 mm thick Material:Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment’s duly oil sealed and self-lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. 3 Providing designing and fixing of Exercising Bar of following specifications:- Size: 1842*542*1616mmMain Post: 140 mm dia and 3.0mm thickOther Pipes: 33mm dia 2.5 mm thick Material:Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. 4 Providing designing and fixing of Arm Wheel of following specifications:-Size: 840*640*1650mmMain Post: 140 mm dia and 3.0mm thickOther Pipes: 88mm dia 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments duly oil sealed and self lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. 5 Providing designing and fixing of Knee-Chairof following specifications:- Size: 740*600*960 mmMain Post: 114 mm dia and 2.5 mm thick Material: Carbon steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments duly oil sealed and self-lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. 6 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) 7 Providing & Fixing of I-Section paver tiles (M-30 Grade) flooring 60 mm thick cement mortar 1:4 mix & joints to be filled with cement mortar 1:3 mix (Complete Job). 8 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 9 Carriage of materials by mechanical transportincluding loading / unloading & stacking complete.• Sand/Crusher Dust for an average distance 10 Km by MT 10 Carriage of materials by mechanical transportincluding loading / unloading & stacking complete.• Stone aggregate below/above 40mm Nominal size Crushed for an average distance of10 kms.

INR 600 /-

INR 5000.0 /-

INR 2.50 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB