Tender For Rate Contract For Cutting Welding Threading Work Under Sub Dn. 2Nd, Bikaner - 1 Part A :- 2 Turning Of Various Sizes Of Cid Joints Class- 10/ 15 Complete Set (Labour Charges), The Joints Will Be Supplied By The Junior Engineer Concern Of De, bikaner-Rajasthan

Tender For Rate Contract For Cutting Welding Threading Work Under Sub Dn. 2Nd, Bikaner - 1 PART A :- 2 Turning of various sizes of CID Joints Class- 10/ 15 Complete set (Labour Charges), The Joints will be supplied by the Junior Engineer concern of Department and carting to workshop and after turning of these joints, firm is liable to transport upto Junior Engineer concerns store own his cost. 3 80 mm dia 4 100 mm dia 5 125 mm dia 6 150 mm dia 7 200 mm dia 8 250 mm dia 9 300 mm dia 10 350 mm dia 11 Threading on GI Pipes different diameter as below (Rate Per Mouth Threading). The Pipes will be supplied by the Department and carting to workshop and after threading of these pipes, firm is liable to transport upto Junior Engineer concerns store own his cost. 12 65 mm 13 Cutting of GI/MS/CI Pipes of any class as below (Rate per Mouth- One cutting only making two pieces). The Pipes will be supplied by the Department. 14 65 mm 15 Welding on M.S. / G.I./CI Pipes and other material by Electric Welding, this includes all the material like welding rods/ equipment like welding machine/ generater, if required for job. 16 At Workshop 17 On Site 18 Making of GI Assembly pipe for various sizes including threading, tightening, welding of flange and welding with MS Patti, holes and cable grove making as per required length of 3.00 M/ 6.00 M (Pipse and flangse shall be providedand carting these to workshop by the the department). Length of MS strip will be 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flange. Holes in the flanged will be standard size and above 12 mm dia. in size. After tightening the pipe and flanged, welding will be done at junction of flange and pipe complete in all respect. After preparing of Assembly Pipes, the firm is liable to transport these toconcerns divisional store own his cost. 19 65 mm 20 Supplying of MS Rods for different sizes of sluice valveand should be supplied as according to size of old rods including material and finishing for the following sizes. 21 Sluice Valve Size 80mm 22 Sluice Valve Size 100mm 23 Sluice Valve Size 125mm 24 Sluice Valve Size 150mm 25 Sluice Valve Size 200mm 26 Supplying of Chuck Nut for different sizes of sluice valveand should be supplied as according to size of Check Nut including material for the following sizes. 27 Sluice Valve Size 80mm 28 Sluice Valve Size 100mm 29 Sluice Valve Size 125mm 30 Sluice Valve Size 150mm 31 Sluice Valve Size 200mm 32 Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge. 33 MS pipe specials up to 600mm dia (with minimum 5mm thickness sheet)

INR 500 /-

INR 24000.0 /-

INR 12 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB