|
| 1 | Earth work in all kind of soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depthand the Earth transported by transport vehicles with supply of all material labour transporation , taxes , tollage , royalties etc all complete but excluding GST as directed by Engineer-in-charge. |
| 2 | Filling in foundation and plinth with filling sand(saline) including watering and rammingandwith supply of all material labour transporation , taxes , tollage , royalties etc all complete but excluding GST as directed by EIC.as directed by the Engineer-in-charge . (NB- 10% void shall be deducted from measured Qnty) |
| 3 | Cement concrete (1:1.5:3) using 12mm to 20mm size C.B.G. chipsfor Ground floor, foundation & plinth etc. of approved quality mixing, hoisting, laying, compacting, curing withsupply of all materials, labour, T&P, taxes, tollage transportations, staging, scaffolding, curing, etc. all complete but excluding GST as per direction of Engineer-in-charge. |
| 4 | Supply Tor/TMT steel of Fe-500 confirming to IS-1786 including cutting, straightening, bending, binding & placing the grills in position for RCC works including binding the grills with binding wire of 18 to 20 gauge including cost of steel, all labour, materials, transportation charges, T&P, taxes, etc. all complete but excluding GST as per the direction of Engineer-in-charge. (NB: No payment shall be made for extra weight than theoretical co-efficient). |
| 5 | Providing rigid smooth leak proof centering & shuttering made ofsteel/ply, plankof approved quality for R.C.C.structures and deshuttering and removing the same after due period with supply of all materials, labour, T&P, taxes, royalties, tollage, etc. all complete but excluding GSTas directed by Engineer-in-charge. |
| 6 | R.C.C. foundation and footing bases of columns mass concrete & pre-cast slab etc. |
| 7 | Brick work in Fly Ash Bricks of size 25cmx12cmx8cm having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) includingsplay/cutting, racking out the joints curing, hoisting, staging at any heightwith cost and supply of all materials, labour, T&P, taxes, royalties, transportation charges, curing, testing charges etc. all complete but excluding GST as per direction of Engineer-in-charge |
| 8 | For F&P |
| 9 | 12 MM thick Cement plasterin ground floor with cement mortar (1:6) proportion, over brickwork including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary includingsupply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, testing charges, tollage, royalties, etc. complete but excluding GST & as per direction of Engineer-in-charge |
| 10 | Supplying HDPEWaterpipes of different dia. and required accessories conforming to IS-4984, Pressure rating PN-06 kg / Sq. cmfor water supply & sanitary worksIncludingcost oftransportation charges, loadind & unloading charges with supply of all labour, T&P, all taxes, staging, but excludingGST etc all complete as per direction of Engineer-in-charge. |
| 11 | 160 mm dia OD HDPEWaterpipe |
| 12 | 200 mm dia OD, HDPEWaterpipes |
| 13 | 160 mm Coupler Elector fusion |
| 14 | 200 mm Coupler Elector fusion |
| 15 | 160mm T Electro fusion |
| 16 | 200 mm T Electro fusion |
| 17 | 160 mm short Bend 90/60/45 |
| 18 | 200 mm short Bend 90/60/45 |
| 19 | 160 mm collar |
| 20 | 200 mm collar |
| 21 | Three core flat cable with 10Sqmm for Sumersible pump set. |
| 22 | Supply, Fitting & fixing of the following size of upvc Reducer socketincluding cost & supply of all materials, labour, Transportation, T&P, all taxes,etc all complete as directed by Engineer-in-charge. excluding GST |
| 23 | Reducer Socket 250 mm to 200 mm |
| 24 | Reducer Socket 200 mm to 160 mm |
| 25 | Laying of 160mm dia. & 200 mm dia. OD HDPE pipe excluding valves including cutting the pipes to required length,Electro Fusion welding to the joints & accessiories Fittings , conveying the pipes to work site with loading at one end and unloading at the other end, providing light & barries,pegs,threads,with Suppy of all labour, T & P, materials,tollage,taxes, port entry fees testing of Pipe line & Flushing the Pipe line with proper means etc. all complete as per direction of Engineer-in-charge.excludingGST |
| 26 | Providing and fixing of 160 mm outer dia. C.I. sluice valves(withcaps) of Kiloskar make complete with bolts,nuts,rubber insertions etc. withsupply of all materials, labour, T&P, transportation charges, hire & running charges of all equipments, water sprinkling, royalties,Taxes, Port entry fees, excluding cost of GST,etc. all complete as directed by the Engineer-in-charge. |
| 27 | Providing and fixing of 200 mm outer dia. C.I. sluice valves(withcaps) of Kiloskar make complete with bolts,nuts,rubber insertions etc. withsupply of all materials, labour, T&P, transportation charges, hire & running charges of all equipments, water sprinkling, royalties,Taxes, Port entry fees, excluding cost of GST,etc. all complete as directed by the Engineer-in-charge. |
| 28 | Providing and fixing of 100 mm dia. C.I. double acting air valves(withcaps) kiloskar make complete with bolts,nuts,rubber insertions etc. withsupply of all materials, labour, T&P, transportation charges, hire & running charges of all equipments, water sprinkling, royalties,Taxes, Port entry fees, excluding cost of GST,etc. all complete as directed by the Engineer-in-charge. |
| 29 | Supply Star Delta starter with thermostate and dry run protection along with start/stop push botton.Trip,start,stop indicators and selector swich for Auto and Mannual Swich with MCCB & MPCB with Suitable incomer 15 KW,Panel will be Supplied one incomer 30KV and two feeder Star Delta for KW.with supply of labour and material,machinery, cost of fuel, electrode, gas, consumables hire and running charges of all kind of equipments,taxes,tollagesetc all complete but excluding GSTas per direction of Engineer-in-charge. |
| 30 | Providing, supplying, fitting, fixing of M.S. grills, made of solid square bar/ MS Flat/MS angle/MS Chennel etc fixing position with screws, clams, nails includingf approved quality & design including fabrication charges,with supply of labour and material,machinery, cost of fuel, electrode, gas, consumables hire and running charges of all kind of equipments,taxes,tollagesetc all complete but excluding GSTas per direction of Engineer-in-charge. |
| 31 | Painting two coats with approved quality & shade enamel paint onnew iron work / old wood work k over one coat of red oxideprimer including scraping, cleaning, thesurface sand papering, filling the holes with wax putty etc. all complete including supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc.all complete but excluding GST as per direction of Engineer-in-charge. |
| 32 | Engagement of following machineries,including hire & running charges of machineries, fuel , lubricants , operator expenses , T & P , safety of operator, all taxes excluding GSTetc.all complete as directed by the Engineer-in-charge.(N.B : No idle charges shall be paid ) |
| 33 | Hydraulic Excavator of 1cum bucket capacity |
| 34 | Cranes (35 tonnes Capacity) |
