Tender For Bawadi,Rtwhs - Construction of01 Anicut, Under State Fund 2024-25 (MJSA 2.0)Phase-I P.S. Ajmer Gramin - 1 Clearing of forest including cutting of heavy bushes and vegetation upto 30 cm height. item 1922 Dressing of land surface by cutting the soil upto an average of 15 cm and removing vegetation and small plants and lifting of debris and rubble upto 1.5 m and dumping upto 50 m distance. Hard Soil/Clay/Sandy Soil ITEM NO 1B3 Excavation of soil upto 1.5 m depth in foundation, trench, drain, tamping the bottom, watering, dressing the sides, removing excavated soil, filling up of empty spaces with soil again after filling of foundation and disposal of remaining soil upto a distance of 50 m item2b4 JCB Excavation work by machine/tractor with scraper, breaking of clods, sorting of grass & pebbles, section of bund (in cut area)/maintaining profile including lifting and lowering of initial lead 250 m and lift upto 3 m. (item No. 196 b) Machinery work in hard soil5 JCB Excavation work by machine/tractor with scraper, Breaking of clods, Sorting of grass & pebbles and maintaining section/profile of bund (in cut area) including lifting and lowering initial lead 250 m and lift upto 3 m. (item No. 196 b) Hard soil mixed with Kankar/boulders, Murram6 JCB Soil excavation by machine/tractor with scraper, Breaking of clods, Sorting of grass & pebbles, and section of bund (in cut area)/maintaining profile including lifting and lowering initial lead 250 m and lift upto 3 m. (item No. 196 b) Soft / Disintegrated Rock7 Soil excavation by JCB machine/tractor with scraper, Breaking of clods, Sorting of grass & pebbles, and section of bund (in cut area)/maintaining profile including lifting and lowering initial lead 250 m. Machinery work in Hard Soil8 JCB Machine/Tractor with scraper for earthwork, breaking of clods, sorting of grass & pebbles and maintaining section/profile of bund (in cut area) including lifting and lowering initial lead 250 m and lift upto 3 m. (item No. 196 b) Hard soil mixed with Kankar/boulders, Murram9 Additional for various lifts in earthwork for removing all type of excavated soil from BAWDI. (d) Additional cost of earth removal from 10-5 m depth to 30-50 m depth per 1-5 m cubic metre or part (lifting) for removal outside BAWDI. Unit per cubic metre per 1-50 m lifting. item no. #173d)10 Stone wall-rammed masonry in foundation and plinth in dry stone without mortar. (item No. 26b)11 Excavation of hard rock by blasting in foundation (usable material 30% in excavated material) (as per Irrigation Department analysis) item no 17412 Cement Concrete 1 Cement : 4 Gravel and 8 Ballast stone of 40 mm nominal size including laying, ramming and tamping etc. in foundation. (item No. 10 a)13 Masonry work of 112 mm thickness of foundation and superstructure with first class bricks in cement-gravel mortar 1:4 including tamping. (item No. 23a)14 Cement concrete in the ratio of 1 cement : 2 gravel : 4 stone aggregate with 12 mm nominal size aggregate, pouring, ramming and tamping etc. (item No. 16)15 Cement plaster on wall by mixing cement-gravel in 1:4 ratio, scraping joints and regular tamping for 14 days to form a 12 mm thick layer. thickness (item No. 76 a)16 Finishing with neat cement (punning).(PWD BSR 2022 / 12.7)17 Laying of top grade stone slab roof, filling with cement mortar in 1:4 ratio with stone arch at top and bottom joints Upto 1.5 m span (item No. 45a)18 Construction of Tube Well from ground level and up to 100 mtr. depthto accommodate housing and assembly pipe in all type of alluvium strata, unconsolidated formation such as pebbles, boulders etc. by percussion/ rotary drilling methodas per IS:2800 Part 1: 1991 andIS:2800 Part II: 1979 (both amended up to date) and technical specifications for removal of overburden. The work includes the cost oflowering of casing pipe, but excludes the cost of casingpipe. Nominal bore 200 mm dia.(PHED BSR 2023 / 2.2.1)19 Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/2001) or amended up to date ofsize 200 mm dia NB (Thickness of pipe 5.4mm & mass of tube 28.46 Kg/m)(PHED BSR 2023 / 2.11.2)20 Labor charges for making slots on blank pipes made of ERW MS black pipe ISI marked of size 200 mm dia nominal bore of 5.4mm thickness, the slotting should be as per IS:8110-1985. (PHED BSR 2023/2.12.3)21 Supply & Fixing M S clamp set of 50x6 mm flat from iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. (PHED BSR 2023/2.22) 22 Supply & Fixing tube well coverof MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2 (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug. 200 mm dia(PHED BSR 2023 / 2.23.3) 23 Providing & Lowering in tube well ISI marked HDPE pipe as per IS 4984:1995 or amended up to date in PE 80 grade and class PN 10 of following dia. including HDPE/GI fittings and PVC rope confirming to IS 5175:1992 or amended up to date, along with clamping of submersible cable etc. complete in all respect. 63 mm dia (PHED BSR 2023 / 2.25.3) 24 Providing & Lowering in tube well ISI marked GI Pipe medium duty (“B class), Steel tube as per IS:1239 or amended up to date and zinc coating as per IS 4736, threaded and double flanged (welded) on both ends and two number25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. 50 mm dia (PHED BSR 2023 / 2.24.2) 25 Galvanized Iron Pipe Fittings including cutting, slotting and slot repairing 25 mm. diameter (item No. 179 b) 26 40mm grit of stone (broken by crusher) (cut voids 1/11 (item No. Mat./6.2) 27 Whitewashing work in 3 layers to give even shade on new/old work. (item No. 81) 28 Dismental old work, breaking old plaster (Lime or Cement), scraping joints and cleaning the surface., breaking cement concrete floor and throwing broken material upto 50 meters distance. 29 Laying of stone in foundation and plinth in cement-gravel mixture, including closing side cracks and tamping etc. Cement gravel 1:6 (item No. 29b) 30 Cutting and mounting of iron girder and fixing it in place 4.5 meter height. (item No. 62) 31 Supply and laying of washed ballast and gravel in the filter in the desired profile with complete lifting. (item No. 168) 32 Putting of washed coarse gravel in layers in the filter toe in the desired profile with complete lifting. (item No. 169) 33 Laying of PVC pipe of 110 mm diameter along with other necessary materials (item No. 181) 34 Small Steel Hand Pump with accessories & pipe 35 Iron work in grill/gate etc. including cutting, mounting and fitting of flat cones, T and channel etc. (for Stair & Lid) (item No. 63) 36 Supply and installation of iron grating of 125 mm diameter. (item N 182) 37 Put washed coarse gravel in layers in filter toe along with all elevations in desired profile. (item No. 168) 38 Break old plaster (Lime or Cement), scrape joints and clean surface. Carefully demolish strip roof along with rods and cracks. Carefully demolish strip roof along with rods and cracks. Break cement concrete floor and throw broken material upto 50 mts. 39 Apply cement plaster on wall by mixing cement-gravel in 1:4 ratio, scrape joints and apply 25 mm thick layer with regular watering for 14 days. thickness (item No. 76 a) 40 Pouring and supplying washed ballast and gravel in the filter in desired profile along with all lifting. (item No. 169) 41 Distempering with dry distemper of approved brand and shade (two or more coats) and of required shade on new work, over and including, priming coat of whiting to give an even shade including all scaffolding. (PWD BSR 2022 / B-12.36) 42 Breaking up old plaster (Lime or Cement), scraping joints and cleaning surface. Item no. 115 43 180cm height fencing with iron post of 50X50X6mm at 3m distance and 45cm in ground. Cement concrete 1:2:4 (.30X.30X.60m) corner and every 10th post supported by 50X50X6mm iron post, along with black barbed wire in 6 lines and 2 diagonal lines, tying and fitting with GI staple wire between 2 posts, including soil excavation work. item 195 A 44 Applying enamel paint in 3 layers to give even shade. Making even surface on new work/old work. item 82 45 Cement concrete 1 cement : 1.5 gravel : 3 stones aggregate ratio with 12mm nominal size aggregate including pouring, tamping and tamping etc. (item No. 13B) 46 Supply and fixing SOLARstreet LED LIGHT With complete accesary 200watt with all taxes 47 Cement plaster on wall using cement-gravel in 1:4 ratio and scraping joints and regular watering for 14 days including 25 fe-fe- item 76
